search for: vlan_mtu

...uf max, using default instead! ix0: Ethernet address: 90:e2:ba:29:c0:54 ix0: PCI Express Bus: Speed 5.0Gb/s Width x8 ... but it apperas as ix0/ix1, manuals only mention ixgb/e, and ifconfig: ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS UM,TSO4,VLAN_HWTSO> ether 90:e2:ba:29:c0:54 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb&...

...e polling which I have chosen not to use yet as I wanted to see initially if it was more stable in its default mode. But what I want to know is the following if possible please. My ifconfig output below. nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet x.x.x.x netmask 0xffffff00 broadcast x.x.x.x inet x.x.x.x netmask 0xffffffff broadcast x.x.x.x ether x media: Ethernet autoselect (1000baseTX <full-duplex>) status: active 1 - is there a man page for nfe anywhere? 2 - does it support hardware...

...he PDC itself is the WINS master browser. They can process logons OK, but I can't join machines, and the users can't change their passwords. Here's the relevant (I think) code: genie# ifconfig fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.77.1 netmask 0xffffff00 broadcast 192.168.77.255 inet6 fe80::2a0:c9ff:fe89:ca86%fxp0 prefixlen 64 scopeid 0x1 ether 00:a0:c9:89:ca:86 media: Ethernet autoselect (100baseTX <full-duplex>) status: active xl0: flags=8802<BROADCAST,SIMPL...

...rts-14-15.tgz Thanks for help, -dennis --------------BEGIN System information--------------- It's a stock FreeBSD 9.1, yet the hostname is called freenas. Don't be confused. igb0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO> ether 00:25:90:34:c1:12 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex>) status: active igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=40...

...% uname -a FreeBSD bs1.sp34.ru 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun May 25 20:15:26 MSD 2008 root@bs1.sp34.ru:/usr/obj/usr/src/sys/BSM i386 bs1% ifconfig em0; ifconfig tap0; ifconfig bridge0 em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=98<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 00:0c:f1:6c:37:4c inet 192.168.16.30 netmask 0xffffff00 broadcast 192.168.16.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:bd:3...

...ep 6 01:52:12 CEST 2008 fxp0: <Intel 82801DB (ICH4) Pro/100 Ethernet> port 0xc800-0xc83f mem 0xe1021000-0xe1021fff irq 20 at device 8.0 on pci1 # ifconfig fxp0 fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:20:ed:42:87:13 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active BTW overall SAMBA performance still sucks on 7.1-pre as much as on RELENG_5 ...:( - 7.5...

Hello Try install FreeBSD 6.3-prerelease on Intel SBXD132 blade (same as IBM HS21 XM) ifconfig bce0 report: bce0: flags=8847<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU> inet 172.0.0.199 netmask 0xffffff00 broadcast 172.0.0.255 ether 00:1a:64:33:29:c7 media: Ethernet autoselect (none) status: no carrier We are looking for someone, who can patch if_bce driver for work with Broadcom NetXtreme II BCM5708S 1000Base-SX (B2) -- Oleg

...'ifconfig <device> -alias' will wipe out all IPs on the device: mobile# ifconfig -a lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:0d:88:22:78:e4 media: Ethernet 10baseT/UTP status: active mobile# ifconfig rl0 -alias mobile# ifconfig -a lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0...

Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the following interface: msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c011b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE> ether 00:11:2f:2a:c7:03 inet 10.0.1.199 netmask 0xffffff00 broadcast 10.0.1.255 inet6 fe80::211:2fff:fe2a:c703%msk0 prefixlen 64 scopeid 0x1 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (100baseTX <full-d...

Guys, I've heard about some absurd RAM requirements for 9.1, has anybody tested it? e.g. http://forums.freebsd.org/showthread.php?t=36314 -- View this message in context: http://freebsd.1045724.n5.nabble.com/9-1-minimal-ram-requirements-tp5771583.html Sent from the freebsd-stable mailing list archive at Nabble.com.

...sterday) ifstat from the ports cannot seem to find interfaces for some reason ? It works fine on i386 [ns8]# ifstat -b ifstat: no interfaces to monitor! [ns8]# [ns8]# ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:15:17:50:40:28 inet xx.xx.128.107 netmask 0xfffffff0 broadcast 64.7.128.111 media: Ethernet 10baseT/UTP <full-duplex> status: active em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500...

....133" jail_ftp_hostname="ftp.XXX.YYY.com" This works well on other systems. Starting the ftp-Jail using /etc/rc.d/jail start ftp the system went "offline", ifconfig showed this: fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 62.xxx.yyy.133 netmask 0xffffffff broadcast 62.xxx.yyy.133 ether 00:06:5b:04:54:69 media: Ethernet autoselect (100baseTX <full-duplex>) status: active Bad thing. The primary IP of the Host and any other IPs on fxp0 got lost, just the jails IP/32 (alia...

Hi, tuning my network fixing nic's speed and duplex (both on server and switch) i got this error with bce driver: # ifconfig bce0 bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> ether 00:15:c5:fe:11:01 inet 192.168.1.13 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (1000baseSX <full-duplex>) status: active # ifconfig bce0 media 1000baseSX ifconfig: SIOCSIFMEDIA (medi...

...baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Ethernet address: 90:2b:34:5f:bd:11 ifconfig ... re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> ether 90:2b:34:5f:bd:21 inet ... nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex>) status: active re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTI...

...l0, some configuration data is below. kustik:~# uname -a FreeBSD kustik 6.1-STABLE FreeBSD 6.1-STABLE #0: Tue Sep 12 09:49:17 UTC 2006 root@kustik:/usr/obj/usr/src/sys/KUSTIK i386 kustik:~# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 10.0.1.8 netmask 0xffffff00 broadcast 10.0.1.255 inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 ether 00:40:f4:70:8b:e4 media: Ethernet autoselect (100baseTX <full-duplex>) status: active rl1: flags=8843<UP,BROADCAST,RUNNING,SIMP...

Hi all, Over the last month or so I've installed FreeBSD 9 (-stable) on several Mac Minis via the memstick image; they seem to be pretty good little boxes for things like offsite secondary nameservers, for example, and they're easily replaced in case of problems. However, the newest minis have slightly different hardware, and FreeBSD can't find the built-in NIC. pciconf -lv on the

...s: 00:1b:21:5b:f2:18 em0 is a PCI 'Intel(R) PRO/1000 GT Desktop Adapter' which worked up until now. em1 is onboard which didn't work with 8.0-RELEASE either. $ ifconfig em0 em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> ether 00:27:0e:1e:5e:e3 inet XXXXXXXX media: Ethernet autoselect status: no carrier pciconf -lv: em0@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10f08086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' class = netwo...

...evfs.rules) can figure out the following: - network interfaces related data, via ifconfig, which contains everything, but the primary IP address of the interfaces. It seems that alias IPs can be viewed: bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING> ether 00:12:79:3d:83:c2 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.2 netmask 0xff000000 - the arp table via arp, which does contain the above interface addresses. This...

...250gig ata/100 7200rpm 8meg cache 3com 905_???_ managed nic root@damn (~)$ smbd -V;uname -prs Version 2.2.8a FreeBSD 5.1-CURRENT i386 root@damn (~)$ ifconfig xl0 xl0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 172.16.16.1 netmask 0xffffff00 broadcast 172.16.16.255 ether 00:01:03:c1:ac:19 media: Ethernet autoselect (100baseTX <full-duplex>) status: active || 100mbps full duplex netgear switch || Windows 2000 SP4 20gig ata/66 7200rpm 512meg p...

hi, I have a hard time figuring this out, the kernel says: ... ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 at device 0.0 on pci4 ix0: Using MSIX interrupts with 9 vectors ix0: Ethernet address: 90:e2:ba:29:c0:54 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: <Intel(R) PRO/10GbE