search for: vlan101

...ackup (two switches). 4.) During install, set up three bridges, with the slave devices being VLANs pointed to the team0 subinterfaces (using VLANs 68, 101, and 302; 101 is to be the management bridge for the host, with guests on all three VLANs).? So, for instance, bridge101 has a slave that is VLAN101 that points to team0.101 with a VLAN ID of 101.? The bridge101 interface has a manual IP address, but bridge68 and bridge302 do not (IPv4 disabled; IPv6 Ignore) 5.) After reboot, the bridge101 interface comes up, and I successfully connect to the host, since the install is 8.1.1911, I ran a ...

...ing install, set up three bridges, with the slave devices > being > VLANs pointed to the team0 subinterfaces (using VLANs 68, 101, and > 302; > 101 is to be the management bridge for the host, with guests on all > three VLANs). So, for instance, bridge101 has a slave that is > VLAN101 > that points to team0.101 with a VLAN ID of 101. The bridge101 > interface > has a manual IP address, but bridge68 and bridge302 do not (IPv4 > disabled; IPv6 Ignore) > > 5.) After reboot, the bridge101 interface comes up, and I > successfully > connect to the host, s...

Hi, I want to add 2 vlans by the following steps: 1. add the vlan interfaces: vconfig add eth0 100 --vlan100 vconfig add eth0 101 --vlan101 2. modify the network-bridge script by the websit, http://wiki.xensource.com/xenwiki/XenNetworking#head-04ebcc1760dbc4678e83b116afa310dc0612dc39 Comment each time ifup or ifdown commands are executed.The reason is that ifdown ends with error for vlan interfaces. /etc/xen/script/network-bri...

...HA1 I have a machine running 2.6.18-rc3 with a bridge config that looks like this: cr1:~# brctl show bridge name bridge id STP enabled interfaces vlan100 36b0.0007e90f40c1 yes eth0.100 eth2.100 vlan101 5dc0.0007e90f40c1 yes eth0.101 eth2.101 vlan102 5dc0.00e08163c33f yes eth3 vlan200 5dc0.0007e90f40c1 yes eth0.200...