search for: virtio_iommu_f_topology

...tio-iommu.tex b/virtio-iommu.tex index 28c562b..2b29873 100644 --- a/virtio-iommu.tex +++ b/virtio-iommu.tex @@ -67,6 +67,9 @@ \subsection{Feature bits}\label{sec:Device Types / IOMMU Device / Feature bits} \item[VIRTIO_IOMMU_F_MMIO (5)] The VIRTIO_IOMMU_MAP_F_MMIO flag is available. + +\item[VIRTIO_IOMMU_F_TOPOLOGY (6)] + Topology description is available at \field{topo_offset}. \end{description} \drivernormative{\subsubsection}{Feature bits}{Device Types / IOMMU Device / Feature bits} @@ -97,6 +100,7 @@ \subsection{Device configuration layout}\label{sec:Device Types / IOMMU Device / le32 end; }...

Add struct definitions for describing endpoints managed by the virtio-iommu. When VIRTIO_IOMMU_F_TOPOLOGY is offered, an array of virtio_iommu_topo_* structures in config space describes the endpoints, identified either by their PCI BDF or their physical MMIO address. Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org> --- include/uapi/linux/virtio_iommu.h | 44 ++++++++++++++++++...

...io_iommu.h > index 237e36a280cb..ec57d215086a 100644 > --- a/include/uapi/linux/virtio_iommu.h > +++ b/include/uapi/linux/virtio_iommu.h > @@ -16,6 +16,7 @@ > #define VIRTIO_IOMMU_F_BYPASS 3 > #define VIRTIO_IOMMU_F_PROBE 4 > #define VIRTIO_IOMMU_F_MMIO 5 > +#define VIRTIO_IOMMU_F_TOPOLOGY 6 > > struct virtio_iommu_range_64 { > __le64 start; > @@ -27,6 +28,12 @@ struct virtio_iommu_range_32 { > __le32 end; > }; > > +struct virtio_iommu_topo_config { > + __le32 offset; Any restrictions on offset? E.g. alignment? > + __le32 nu...

...s let's reset at the end? > + /* Find out if the device supports topology description */ > + writel(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + pci_iounmap(dev, regs); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + return; > + } > + > + pos = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!pos) { > + pci_warn(dev, "device config capability not found\n"); > +...

Add a topology description to the virtio-iommu driver and enable x86 platforms. Since [v2] we have made some progress on adding ACPI support for virtio-iommu, which is the preferred boot method on x86. It will be a new vendor-agnostic table describing para-virtual topologies in a minimal format. However some platforms don't use either ACPI or DT for booting (for example microvm), and will

Add a topology description to the virtio-iommu driver and enable x86 platforms. Since [v2] we have made some progress on adding ACPI support for virtio-iommu, which is the preferred boot method on x86. It will be a new vendor-agnostic table describing para-virtual topologies in a minimal format. However some platforms don't use either ACPI or DT for booting (for example microvm), and will

...gy description */ + viommu_cwrite(dev, pos, &common, 4, + offsetof(struct virtio_pci_common_cfg, + device_feature_select), + 0); + features = viommu_cread(dev, pos, &common, 4, + offsetof(struct virtio_pci_common_cfg, + device_feature)); + if (!(features & VIRTIO_IOMMU_F_TOPOLOGY)) { + dev_dbg(&dev->dev, "device doesn't have topology description"); + return; + } + + viommu_parse_topology(dev, pos, &dev_cfg); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_REDHAT_QUMRANET, 0x1014, + viommu_pci_parse_topology); + +static const struct iommu_ops *virt_i...

...cfg = regs + cap.offset; > + > + /* Find out if the device supports topology description */ > + writel(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + pci_iounmap(dev, regs); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + return; > + } > + > + pos = viommu_pci_find_capability(dev, > VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!pos) { > + pci_warn(dev, "device config capability not found\n"); &g...

...cfg = regs + cap.offset; > + > + /* Find out if the device supports topology description */ > + writel(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + pci_iounmap(dev, regs); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + return; > + } > + > + pos = viommu_pci_find_capability(dev, > VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!pos) { > + pci_warn(dev, "device config capability not found\n"); &g...

...cfg = regs + cap.offset; > + > + /* Find out if the device supports topology description */ > + writel(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + pci_iounmap(dev, regs); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + return; > + } > + > + pos = viommu_pci_find_capability(dev, > VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!pos) { > + pci_warn(dev, "device config capability not found\n"); &g...

...NFIG_S_DRIVER, > + &common_cfg->device_status); > + > + /* Find out if the device supports topology description */ > + iowrite32(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + goto out_reset; > + } > + > + ret = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!ret) { > + pci_warn(dev, "device config capability not found\n");...

...NFIG_S_DRIVER, > + &common_cfg->device_status); > + > + /* Find out if the device supports topology description */ > + iowrite32(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + goto out_reset; > + } > + > + ret = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!ret) { > + pci_warn(dev, "device config capability not found\n");...

I'm seeking feedback on multi-platform support for virtio-iommu. At the moment only devicetree (DT) is supported and we don't have a pleasant solution for other platforms. Once we figure out the topology description, x86 support is trivial. Since the IOMMU manages memory accesses from other devices, the guest kernel needs to initialize the IOMMU before endpoints start issuing DMA.

I'm seeking feedback on multi-platform support for virtio-iommu. At the moment only devicetree (DT) is supported and we don't have a pleasant solution for other platforms. Once we figure out the topology description, x86 support is trivial. Since the IOMMU manages memory accesses from other devices, the guest kernel needs to initialize the IOMMU before endpoints start issuing DMA.

...ev, pos, &common, 4, > + offsetof(struct virtio_pci_common_cfg, > + device_feature_select), > + 0); > + features = viommu_cread(dev, pos, &common, 4, > + offsetof(struct virtio_pci_common_cfg, > + device_feature)); > + if (!(features & VIRTIO_IOMMU_F_TOPOLOGY)) { > + dev_dbg(&dev->dev, "device doesn't have topology description"); > + return; > + } > + > + viommu_parse_topology(dev, pos, &dev_cfg); > +} > + > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_REDHAT_QUMRANET, 0x1014, > + viommu_pci_parse_topolo...

Add topology description to the virtio-iommu driver and enable x86 platforms. Since the RFC [1] I've mostly given up on ACPI tables, since the internal discussions seem to have reached a dead end. The built-in topology description presented here isn't ideal, but it is simple to implement and doesn't impose a dependency on ACPI or device-tree, which can be beneficial to lightweight

...IO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER, + &common_cfg->device_status); + + /* Find out if the device supports topology description */ + iowrite32(0, &common_cfg->device_feature_select); + features = ioread32(&common_cfg->device_feature); + + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { + pci_dbg(dev, "device doesn't have topology description"); + goto out_reset; + } + + ret = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_DEVICE_CFG, &cap); + if (!ret) { + pci_warn(dev, "device config capability not found\n"); + goto out_reset; + } + + regs =...

...NFIG_S_DRIVER, > + &common_cfg->device_status); > + > + /* Find out if the device supports topology description */ > + iowrite32(0, &common_cfg->device_feature_select); > + features = ioread32(&common_cfg->device_feature); > + > + if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) { > + pci_dbg(dev, "device doesn't have topology description"); > + goto out_reset; > + } > + > + ret = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_DEVICE_CFG, &cap); > + if (!ret) { > + pci_warn(dev, "device config capability not found\n");...