search for: victronups

Hi Alexey, 2009/1/22 Alexey Korobeinikov <alexey at mgm.kiev.ua> > Hi. > I have a trouble starting NUT (driver victronups) version 2.2.2-67.1 (for > OpenSuSe 11.1) with follow error: > > /usr/lib/ups/driver/victronups -a match500 > Network UPS Tools - GE/IMV/Victron UPS driver 0.1.9 (2.2.2) > the driver is faulty. the difference with the version you compiled is the fortification flag... you'll have...

Hi I have a GE Digital Energy Match UPS 1500 where i previously successfully used the victronups driver. However after i upgraded from debian woody to debian sarge and thus from 1.4.2 to 2.0.1, then upsstats.cgi says Model not supportet, status online My syslog says Jul 25 11:12:28 localhost upsmon[6220]: Startup successful Jul 25 11:12:28 localhost upsd[6218]: Connection from 127.0.0.1 Jul...

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

Hi All, I'd like to modify an existing driver to support my Victron Multiplus inverter/charger. This device is not supported by the victron driver. I do have serial protocol definition from Victron - which is a big bonus... Could anyone tell me which of the existing drivers will be easiest to modify? Thanks Thanks -- Boli

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

...t;> belkinunv genericups oneac upscode2 >> bestfcom isbmex optiups upsd >> bestfortress ivtscd powercom upsmon >> bestuferrups liebert powerpanel usbhid-ups >> bestups liebert-esp2 rhino victronups >> blazer_ser masterguard richcomm_usb >> " >> >> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >> XR21V1410 USB-UART IC" >> >> And i don't know what to do next. >> >> Fatgear >> >> --------...

...belkinunv???? genericups??? oneac upscode2 >> bestfcom????? isbmex??????? optiups????????? upsd >> bestfortress? ivtscd??????? powercom???????? upsmon >> bestuferrups? liebert?????? powerpanel usbhid-ups >> bestups?????? liebert-esp2? rhino victronups >> blazer_ser??? masterguard?? richcomm_usb >> " >> >> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >> XR21V1410 USB-UART IC" >> >> And i don't know what to do next. >> &gt...

...hid-ups.c (working copy) @@ -529,7 +529,7 @@ { printf("Network UPS Tools: %s %s - core %s (%s)\n\n", comm_driver->name, comm_driver->version, - DRIVER_VERSION, UPS_VERSION); + DRIVER_VERSION, upsversion()); } void upsdrv_updateinfo(void) Index: drivers/victronups.c =================================================================== --- drivers/victronups.c (revision 916) +++ drivers/victronups.c (working copy) @@ -504,7 +504,7 @@ void upsdrv_banner(void) { printf("Network UPS Tools - GE/IMV/Victron UPS driver %s (%s)\n\n", - DRV_VERSION, UPS_...

Hi all! Does NUT offer any support for the GE Digital Energy NetPro 19" UPS? I have one of those beasts here, connected to a Linux machine via it's own 'serial' cable. Regards, Evert

http://works.tarefer.ru/69/100650/pics/image021.gif - successfully works on subj with driver - victronups (NUT-2.4.3) UPS (DB9M) - PC (DB9F) 1 - 3 (TxD) 2 - 2 (RxD) 5 - 5 (SG) 4 - 7 (RTS) -- Kindest regards, Dmitry Panoff -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20131011/edcfdd68...

Operating system Windows 7 x64 NUT version 2.6.5 Windows port UPS Victron NetPro connected via serial port When I run driver when UPS cable is connected to computer's serial port it exits with following output victronups - -DDDD -a victron Network UPS Tools -GE/IMU/Victron UPS driver 0.20 (2.6.5.-3723:3731M) 0.000000 debug level is "4" 0.000000 w32_serial_open (COM1) 0.000000 setting initial state on COM1 0.015600 0000000050 = w32_serial_open (COM1) 0.015600 Warning: no locking method is available: No er...

...} } @@ -971,7 +973,8 @@ void upsdrv_initups(void) ser_set_dtr(upsfd, 0); ser_set_rts(upsfd, 0); - usleep(10000) ; /* small delay (1/100 s)) */ + /* small delay (1/100 s) */ + struct timespec delay = {0, 10e6}; nanosleep(&delay, NULL); } void upsdrv_cleanup(void) Index: b/drivers/victronups.c =================================================================== --- a/drivers/victronups.c 2011-05-31 13:36:49.000000000 +0300 +++ b/drivers/victronups.c 2011-08-17 03:09:10.000000000 +0300 @@ -49,8 +49,8 @@ upsdrv_info_t upsdrv_info = { #define ENDCHAR '\r' #define IGNCHARS "\...

...genericups oneac upscode2 >>> bestfcom isbmex optiups upsd >>> bestfortress ivtscd powercom upsmon >>> bestuferrups liebert powerpanel usbhid-ups >>> bestups liebert-esp2 rhino victronups >>> blazer_ser masterguard richcomm_usb >>> " >>> >>> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >>> XR21V1410 USB-UART IC" >>> >>> And i don't know what to do next. >>> >>&gt...

...? genericups??? oneac upscode2 >>> bestfcom????? isbmex??????? optiups upsd >>> bestfortress? ivtscd??????? powercom upsmon >>> bestuferrups? liebert?????? powerpanel usbhid-ups >>> bestups?????? liebert-esp2? rhino victronups >>> blazer_ser??? masterguard?? richcomm_usb >>> " >>> >>> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 >>> Exar Corp. >>> XR21V1410 USB-UART IC" >>> &g...

...oneac upscode2 >>>> bestfcom isbmex optiups upsd >>>> bestfortress ivtscd powercom upsmon >>>> bestuferrups liebert powerpanel usbhid-ups >>>> bestups liebert-esp2 rhino victronups >>>> blazer_ser masterguard richcomm_usb >>>> " >>>> >>>> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >>>> XR21V1410 USB-UART IC" >>>> >>>> And i don't know what to do ne...

.../man8/nutupsdrv.8.gz %{_mandir}/man8/oneac.8.gz %{_mandir}/man8/powercom.8.gz %{_mandir}/man8/powermust.8.gz %{_mandir}/man8/safenet.8.gz %{_mandir}/man8/sms.8.gz %{_mandir}/man8/solis.8.gz %{_mandir}/man8/tripplite.8.gz %{_mandir}/man8/tripplitesu.8.gz %{_mandir}/man8/upscode2.8.gz %{_mandir}/man8/victronups.8.gz %{_mandir}/man8/upsd.8.gz %{_mandir}/man8/upsdrvctl.8.gz %{_mandir}/man5/ups.conf.5.gz %{_mandir}/man5/upsd.conf.5.gz %{_mandir}/man5/upsd.users.5.gz %{_datadir}/%{PACKAGE} %files %defattr(-,root,root) %doc CHANGES COPYING CREDITS INSTALL README docs/ %dir %attr(755,root,root) %{_sysconfdir}/...

Dear Andreas, some googling revealed, you created a driver for the xanto series of online-usv.de. In what state it is currently? I've to manage a S2000 and would like to use nut for it, is it usable by now? Do you need another tester? TIA, Pete

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

...---- diff -Naur drivers_orig/Makefile.am drivers/Makefile.am --- drivers_orig/Makefile.am 2006-12-04 13:08:58.000000000 +0300 +++ drivers/Makefile.am 2006-12-04 13:05:14.000000000 +0300 @@ -22,7 +22,7 @@ nitram oneac optiups powercom rhino safenet skel sms solis tripplite \ tripplitesu upscode2 victronups SNMP_DRIVERLIST = snmp-ups -USB_LIBUSB_DRIVERLIST = newhidups bcmxcp_usb tripplite_usb +USB_LIBUSB_DRIVERLIST = newhidups bcmxcp_usb tripplite_usb megatec_usb USB_HIDDEV_DRIVERLIST = hidups energizerups USB_DRIVERLIST = $(USB_LIBUSB_DRIVERLIST) $(USB_HIDDEV_DRIVERLIST) @@ -83,7 +83,7 @@ isbme...