search for: vic2

I'm using a cisco 1760 with a VIC2-4FXO card for my calls to PSTN. If a user on a softphone hangs up first the PSTN port on the cisco is released and new calls can be made on the same voice port. But when the user on the PSTN side hangs up first the voice port on the cisco stays open until the user on the softphone hangs up. Any...

I have 2610 XM with 1 Fastethernet and VIC2-2BRI. Dialin and dialout over pots is ok. Also inbound pots calls get redirected to Asterisk y.y.y.y So far so good. But I want to setup VOIP sessions with local carrier. I added dial-peer 40 for this. Session target x.x.x.x But calls will always get routed to the pstn peers 50 and 60. Peer x...

Dear All : I need to link my HQ to some Remote Sites - I need a Router which supports VOIP , and VPN Also the Router Should has 3 FXS ports and 1 FXO ... The call should be routed from the Remote Site to the HQ through a VPN tunnel ( 3DES ) ... Any Advise ? Mohamed Farid ,, Notice: This e-mail (including attachments) is confidential and is intended solely for the addressee. Unless you are

I have several 7960 phones with SIP image (7.3) and Asterisk 1.0.1 on FreeBSD. When I have 2 active SIP calls on the 7960 phone there are no available lines for additional calls. I tried to configure 2 lines to the same SIP server but it's still limited to 2 calls. How to utilize all lines? -- Called user -- SIP/user-acc6 is ringing -- SIP/user-acc6 answered SIP/x.x.x.x-09a9a000 --