search for: ver40141f1

Sorry for my delay, I've only just read this mail. At first glance the driver looks like it should work, I will test it tomorrow (if possible) and let you know. I'll also give a reply to your questions. Many thanks for the work you've already put into this. -------------------------------------------------- From: <hyouko at gmail.com> Sent: Monday, June 30, 2014 12:42 AM To:

...(Fideltronik) After quite a bit of playing around I managed to get the status of the UPS using the blazer_usb driver and running NUT 2.6.5. But unfortunately none of the Instcmds such as load.off etc. worked. Some of the more pertinent info from the status: productid 0000 vendorid 0001 firmware VER40141F1 and from lsusb idvendor 0x0001 Fry's Electronics iManufacturer MEC iProduct MEC0003 The driver is using the Megatec protocol with the Krauler subdriver So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS. I then installed NUT 2.7.1 and tri...

Sorry for the huge delay and thanks Charles for taking care of this topic. >> I'm running OpenSuse 13.1 and I have a Lupus 500 USB (Fideltronik) >> >> After quite a bit of playing around I managed to get the status of the UPS using the blazer_usb driver and running NUT 2.6.5. >> But unfortunately none of the Instcmds such as load.off etc. worked. > > Can you post

...gatec 0.01 driver.version.internal: 0.07 input.current.nominal: 2.2 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 225.4 input.voltage.fault: 225.4 input.voltage.nominal: 230 output.voltage: 231.0 ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware: VER40141F1 ups.load: 0 ups.productid: 0000 ups.status: OL ups.temperature: 0.0 ups.type: offline / line interactive ups.vendorid: 0001 Everything looks fine apart from ups.beeper.status always shows enabled even if the status bit fom the ups has changed state. Saying that this ups only disables the beeper...

...b driver and running NUT 2.6.5. > But unfortunately none of the Instcmds such as load.off etc. worked. Can you post the output of upsc, and note if any of those values look wrong? > Some of the more pertinent info from the status: > > productid 0000 > vendorid 0001 > firmware VER40141F1 > > and from lsusb > > idvendor 0x0001 Fry's Electronics > iManufacturer MEC > iProduct MEC0003 > > The driver is using the Megatec protocol with the Krauler subdriver Were the blazer and/or nutusb_qx drivers able to match the Krauler subdriver automatically, or...