search for: valcom

Hi; I'm trying to connect a TDM400P with an FXS module to a Valcom V-9940 Paging adaptor. This port on the TDM400P was connected to a 2500 Set and was working I just re-connected it to the Valcom (which is known to work on a Telco POTS line) and its not picking up. The Valcom docs say it need a minimum of 75 Volts at 20-30 Hz to recognize a call... So the qu...

I am using my first PAP2 device from linksys. Used many polycom phones... I configured the PAP2 device with asterisk. I have the registration, thought I was good to go. Plugged in my Valcom 2924 public address analog connection, called the extension and I got busy... very strange I thought. I then looked at the status page of the PAP2 and it says the following Reg online and hook state OFF. How do I get the hookstate to be ON so that I can call into the device? I have power cycl...

We currently have an Asterisk system that is hooked up to our old paging speakers via sound card, plugged into two amps. Each amp drives up to 8 analog speakers in each warehouse (we have 2). Both warehouses are around 30k square feet. Both have a large number of printing presses. The computer system is that is running Asterisk is around 10 years old and starting to fail. I'm looking to

I'm replacing a Merlin for a client and they have a PagePal Intercom that I would like to reuse. Here is what I know about it: It has a screw-down wires that goto rj-11 (This was told to me over the phone) that went into one of the Merlin ports. I tried bring it up with fxo_ks and fxo_ls (assuming it was analog and autoanswered) but no luck. I would be happy to replace if anyone knows of

...customer site I use a linksys ATA setup with auto answer, connect the tip and ring of the FXS port to the audio input of the overhead paging system, works fine. Also at another customer site, the paging guys installed a audio input device that activates when ring voltage hits the line, http://www.valcom.com/v-9970.htm . Installed an ATA, nothing special, call that extension and device brings the ATA off-hook then bam, your passing audio to the paging system. You can pick these up for ~$200. JR -- JR Richardson Engineering for the Masses

Hi, I occasionally had the following error when application in idle state. Error: undefined method ''calc_min'' for #<Wx::IdleEvent:0xb115e44> OS: WXMSW Ruby Version: 1.8.6 wxRuby 2.0.0 Backtrace: (eval):154:in `calc_min'' (eval):154:in `layout'' (eval):154:in `process_event'' (eval):154:in `on_run'' (eval):154:in

Very friggen cool, that you very much for the information it looks like it will do the job nicely. What did you use in your extensions list to activate the relay? James > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jay Milk > Sent: Sunday, 20 February 2005 6:24 PM > To: 'Asterisk

...-- Executing [100@internal:3] Hangup("SIP/spa3k-fxs-08e884b0", "") in new stack == Spawn extension (internal, 100, 3) exited non-zero on 'SIP/spa3k-fxs-08e884b0' ________________________________________________________________ Sent via the WebMail system at mail.valcom.com

Can uClibc substitute for klibc? uClibc is ported to the coldfires. Where can I find documention/howto's on early userspace? Cheers Robert Williams 5614 Hollins Road Roanoke, VA USA 24019 www.valcom.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.zytor.com/pipermail/klibc/attachments/20050822/1a5df629/attachment.html

hi all! Is it possible to trigger some external device trough parallel port or. serial on some caller id ? or if it's possible tu run some external (linux) program on specific caller id ? OR if anyone have idea how to open the doors with asterisk :) by, Thomas

Hi, Is there an affordable HW solution to do a door phone on *? I do not mind using the solder iron to modify an existing door box. Thank you! Best regards HB Norway

Is there an ATA type device out there that has low level audio out for connecting speakers? My asterisk server is in one building, I wish to have speakers in another building and connect them up to a low level audio device that I can call into and speak. Can I connect speakers into the FXS or FXO of a grandstream HT 503? Does that work? I'd prefer not to have a PC setting there (sound

I have a problem. In my application I have a few Grid objects in a Notebook. The Grid objects are populated via GridTableBase. Certain Grid cells need to have a choice interface (I''m artificially enforcing foreign key constraints). All this works to the point where you try to edit the value for that cell. The choice box renders (i.e. the drop down arrow appears) then the application

Hello My email has been broken for a week and some of it seems to have gone astray - so if there are other unanswered wxruby queries kicking about, please repost or forward me them. I have encountered this problem with a DOS box popping up under rubyw / rubyscript2exe; I don''t think it''s related to wxruby. I found them popping up when shelling out with backticks - I believe

I see a lot of chatter in the archives about intercom and paging, but has anyone addressed zone paging? Each of the 50 telephones in a large clinic would be members of one or more paging zones. Someone could then page Dr. X in zone #1. Would this be possible with analog phones? SIP? Thanks, Mike

Why *wouldn't* I bother? Using $5-$10 sound cards would be a much cheaper, professional, and more permanent solution than having a couple hacked phones laying near the PA system. Just trying to keep the setup clutter and problem free, as well as as cheap as possible. I'm not a developer, but I don't think it'd be too much of a pain to program the console channel driver to provide

Hello all, i read a few articles online about the possibility to setup a "buzzer" door system to PBX using asterisk! currently my setup contains asterisk of course, and a sipura 3102.. what do i need to get such a feature done?! or should i ask if its possible?! _________________________________________________________________ Connect to the next generation of MSN Messenger?

Hello I assume I'm not the first one to think about this: Is it possible to connect an intercom and/or door bell to Asterisk, so that I can get an e-mail that someone rang my place while I was out? Even better: If used for a doctor's office, it'd be cool if patients could type their Social Security Number on a keypad, which would open the door and notify Asterisk which would then

Does anyone have an (overhead) paging system that they like that works with SIP? We've got a client with an old paging system that (supposedly) just takes an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn't auto-answer the call, so paging never happens. [cid:image001.png at 01D4DFF6.9C1F1AA0] Michael J. Munger, dCAP, MCPS, MCNPS, MBSS Microsoft Certified

I want to force my Frame to be visible under certain conditions, even if it''s currently behind other windows. I am running under Windows XP. I am calling raise to do this, but the Frame doesn''t come to the front, though the icon does alert. Isn''t this what Window#raise is supposed to do? Is this a Windows issue? Eric Rubin