search for: usv

Hi NUT-Team, I have an effekta MKD1000 USV and I want to connect with NUT over serial device to this USV.I have used blazer_ser as driver but I cannot get a connection to the USV. When I have a look to the driverlist then the effekta MKD1000 is not listed.In a window-System I can connect to the USV with the UPS management system from genere...

Hi, the following UPS isnt supported by the driver "usbhid-ups". Manufacturer: APC Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko- Sockets/P-BX950U-GR) Config: [USV] driver = usbhid-ups port = auto desc = "USV" . MODE=standalone Terminal: root at debian-jessie-final:~# sudo upsd -u root Network UPS Tools upsd 2.7.4 fopen /var/run/nut/upsd.pid: No such file or directory listening on 127.0.0.1 port 3493 listening o...

Hello List, i have a "PowerWalker VI 400, VI 600, VI 800" ups, which i bought on ebay since it said it supports Linux. Well, it came with a closed source binary written in Java. :( Has anyone a config file which will fit to my PowerWalker ups/usv? The genericups driver doesnt seem to work. Thanks, Mario -- GMX DSL = Maximale Leistung zum minimalen Preis! 2000 MB nur 2,99, Flatrate ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl

...Lepple <clepple at gmail.com>: On May 2, 2019, at 4:08 PM, Mathias Passow wrote: Hi, the following UPS isnt supported by the driver „usbhid-ups“. Manufacturer: APC Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko-Sockets/P-BX950U-GR) Config: [USV] driver = usbhid-ups port = auto desc = "USV" … MODE=standalone Terminal: root at debian-jessie-final:~# sudo upsd -u root Network UPS Tools upsd 2.7.4 fopen /var/run/nut/upsd.pid: No such file or directory listening on 127.0.0.1 port 3493 listening on ::1 port 3493 Can't connect to...

Dear Nut-Devs, I have general question to the contribution and the handling of new code in the NUT-Project. We would like to implement our USV-Solution as a driver to NUT, but we are having the problem, that we need a powerful “C”-based gpio library for it. We discussed this topic internally, and we are having the opinion, that it does make sense, to write this library separate from a NUT-driver, and publish this gpio-library with GPLv2...

Good morning, i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG. I tried all the buildin drivers, also the driver for the driver for the Generic UPS, nothing worked for this UPS so now my question has anyone else this UPS and functional driver? Thanks and Greets Dennis

...hostname snmp-ups[27115]: dstate_setflags: base variable (battery.runtime.low) is immutable Default for battery.runtime.low is 180 seconds. My idea is to increase the value to 420 seconds. Although I get the warnung/error, in the output of upsc the variable is set to the desired value: # upsc USV at hostname battery.charge: 100.00 battery.current: 0.00 battery.runtime: 18120.00 battery.runtime.low: 420 [...] My question is, which value is used now to determine the LB-State. The default value or the value in upsc? Is it even possible to use the override.* value with the snmp-ups driver? t...

Hi everybody, we have three MGE UPS'. I've read all the documents I've found, but I haven't got the information I need. All three of them being attached to the same machine I need a way to identify which is wich (all three use the same driver). They power different systems (two of them running windows so that I can't easily setup a network-enabled software on two of them, as

...nd the UPS just cuts the power about 2sec after receiving the shutdown command. Second issue: When the UPS is on battery power and I issue the shutdown, it goes off, but after about 15sec it comes back on even while still on battery power. I tried setting ondelay to -1 and while that keeps the USV off, when the power comes back, the USV appears to turn on, but there is no power on its outlets. Only the additional 3 outlets that are not covered by the battery, do have power. The only fix is to turn off the USV and turn it back on. For this issue, I attached three driver debug logs: 1. deb...

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1 upssched[855]: exec_cmd(/etc/nut/upssched-cmd ONBATT) returned 126 May 13 21:51:04 s-monitor1 upsmon[1674]: UPS usv1 at localhost on battery May 13 21:51:04 s-monitor1 upsmon[1674...

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Op...

...nd. What values have you tried? I wonder if it is rounding down to 0 seconds. > Second issue: When the UPS is on battery power and I issue the shutdown, it goes off, but after about 15sec it comes back on even while still on battery power. I tried setting ondelay to -1 and while that keeps the USV off, when the power comes back, the USV appears to turn on, but there is no power on its outlets. Only the additional 3 outlets that are not covered by the battery, do have power. The only fix is to turn off the USV and turn it back on. > For this issue, I attached three driver debug logs: USV...

...ay 2, 2019, at 4:08 PM, Mathias Passow wrote: > > Hi, the following UPS isnt supported by the driver „usbhid-ups“. > > Manufacturer: APC > Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko-Sockets/P-BX950U-GR) > > Config: > [USV] > driver = usbhid-ups > port = auto > desc = "USV" > … > > MODE=standalone > > Terminal: > root at debian-jessie-final:~# sudo upsd -u root > Network UPS Tools upsd 2.7.4 > fopen /var/run/nut/upsd.pid: No such file or directory &g...

Hello, I'm working on getting nut using a Powermust Office 650 USB USV. Using today's trunk megatec_usb detects its vendorid 0665 productid 5161 but uses the agiler driver for it which apparently does not work (timeout...). I think this device is using that USB-to-serial chip but a different protocol behind. I got the phoenix subdriver working with the device...

Hello, today I'm fighting with a Online Zinto 1000 (lsusb.txt) produced by Phoenixtec/Eaton ;-) http://www.eaton.com/EatonCom/OurCompany/NewsandEvents/NewsList/CT_141334 I have tested different drivers without success (please see attachments usbhid-ups.txt, bcmxcp_usb.txt, blazer_usb.txt) The help got unfortunately time outs (explore.txt)

....0 -- --- Catalin-Constantin ROIBU Forestry engineer, PhD Forestry Faculty of Suceava Str. Universitatii no. 13, Suceava, 720229, Romania office phone +4 0230 52 29 78, ext. 531 mobile phone +4 0745 53 18 01 +4 0766 71 76 58 FAX: +4 0230 52 16 64 silvic.usv.ro [[alternative HTML version deleted]]

...-- Catalin-Constantin ROIBU Lecturer PhD, Forestry engineer Forestry Faculty of Suceava Str. Universitatii no. 13, Suceava, 720229, Romania office phone +4 0230 52 29 78, ext. 531 mobile phone +4 0745 53 18 01 +4 0766 71 76 58 FAX: +4 0230 52 16 64 silvic.usv.ro [[alternative HTML version deleted]]

...-- Catalin-Constantin ROIBU Lecturer PhD, Forestry engineer Forestry Faculty of Suceava Str. Universitatii no. 13, Suceava, 720229, Romania office phone +4 0230 52 29 78, ext. 531 mobile phone +4 0745 53 18 01 +4 0766 71 76 58 FAX: +4 0230 52 16 64 silvic.usv.ro [[alternative HTML version deleted]]

...e upsmon.conf file. My line in the config looks like this: NOTIFYCMD "/etc/nut/upsnotify.sh" Now this ist my "/etc/nut/upsnotify.sh": #!/bin/bash EMAIL='mail at domain.de' SMS1='+49123456789' SMS2='+491987654231' #eMail versenden echo -e "Die USV mit dem Namen '$UPSNAME' hat seinen Status ge?ndert!\n\nAktueller Status: '$NOTIFYTYPE'\n\nam `date +%d.%m.%Y` um `date +%H:%M` Uhr" |mail -s "[USV: $UPSNAME][STATUS] $NOTIFYTYPE am `date +%d.%m.%Y` um `date +%H:%M` Uhr" $EMAIL #SMS versenden echo -e "Die USV m...

...u! -- --- Catalin-Constantin ROIBU Forestry engineer, PhD Forestry Faculty of Suceava Str. Universitatii no. 13, Suceava, 720229, Romania office phone +4 0230 52 29 78, ext. 531 mobile phone +4 0745 53 18 01 +4 0766 71 76 58 FAX: +4 0230 52 16 64 silvic.usv.ro [[alternative HTML version deleted]]