search for: upsilon200

...re pertinent info from the status: productid 0000 vendorid 0001 firmware VER40141F1 and from lsusb idvendor 0x0001 Fry's Electronics iManufacturer MEC iProduct MEC0003 The driver is using the Megatec protocol with the Krauler subdriver So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS. I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this improved matters, unfortunately it didn't help. So after some sniffing on the USB port I observed that there were some differences between Upsilon200 and NUT (on Upsilon only the shu...

...duct MEC0003 > > The driver is using the Megatec protocol with the Krauler subdriver Were the blazer and/or nutusb_qx drivers able to match the Krauler subdriver automatically, or did you have to specify it manually in ups.conf? > So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS. > > I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this improved matters, unfortunately it didn't help. > > So after some sniffing on the USB port I observed that there were some differences between Upsilon200 and NUT (o...

...r_usb driver and running NUT 2.6.5. >> But unfortunately none of the Instcmds such as load.off etc. worked. > > Can you post the output of upsc, and note if any of those values look wrong? Seconding Charles's request. >> So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS. >> >> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this improved matters, unfortunately it didn't help. >> >> So after some sniffing on the USB port I observed that there were some differences between Upsilon20...

...;>> But unfortunately none of the Instcmds such as load.off etc. worked. >> >> Can you post the output of upsc, and note if any of those values look >> wrong? > > Seconding Charles's request. > >>> So I connected the USB to my Windows machine and using Upsilon2000 it >>> was possible to shutdown the UPS. >>> >>> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this >>> improved matters, unfortunately it didn't help. >>> >>> So after some sniffing on the USB port I observed that t...

...none of the Instcmds such as load.off etc. worked. >>> >>> Can you post the output of upsc, and note if any of those values look >>> wrong? >> >> Seconding Charles's request. >> >>>> So I connected the USB to my Windows machine and using Upsilon2000 it >>>> was possible to shutdown the UPS. >>>> >>>> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if >>>> this improved matters, unfortunately it didn't help. >>>> >>>> So after some sniffing on the US...