search for: upsdrv_initups

Hello! I have installed the nut package from the OpenBSD 4.4 packages tree, nut-2.2.1p0 I have a new APC Smart-UPS 750 which I plan to connect via USB. When I try to start the usbhid-ups i get debug level is '2' upsdrv_initups... No appropriate HID device found No matching HID UPS found for almost anything i try. OpenBSD detects my UPS and assigns it to a device and it can be seen using usbdevs. The only clue I have so far is that there should be something with the USB subsystem. Example line that does not work: $ sud...

Hi, (please let me know if there is a better place to submit bugs) I run a FreeBSD box with stack-protector enabled, which raises a problem in the upsdrv_initups() function of the newhidups.c module; the regex_array variable is sized one item too small. Regards, Herve Masson <<<< void upsdrv_initups(void) { int i; #ifndef SHUT_MODE /*! * SHUT is only supported by MGE UPS SYSTEMS units * So we don't need the regex mech...

...it is slightly different in 3 ways that I have found so far. 1. It's a Smart-UPS RT 3000 XL 2. The 940-0095B cable now uses an RJ45 connector at the UPS end. 3. It now requires a baud rate of 9600 instead of the 2400 used previously. Can anyone tell me if modifying drivers/apcsmart.c void upsdrv_initups(void) { char *cable; upsfd = ser_open(device_path); ser_set_speed(upsfd, device_path, B2400); to void upsdrv_initups(void) { char *cable; upsfd = ser_open(device_path); ser_set_speed(upsfd, device_path, B9600); all that is required in order to get nut to talk to it, or will other things...

...bhid-ups doesn't seem to like it: # usbhid-ups -DDDDDDD -a cyberpower Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/usb/hid2" 0.000052 debug level is '7' 0.000331 upsdrv_initups... 0.001113 No appropriate HID device found 0.001152 No matching HID UPS found Strangely enough if I pass -u root, it ignores my port setting and just tries to open the first thing in /dev/usb and exists: # ./usbhid-ups -a cyberpower -DDDDDDD -u root Network UPS Tools - Generic HID d...

...=================================== --- drivers/bestups.c (revision 916) +++ drivers/bestups.c (working copy) @@ -395,7 +395,7 @@ void upsdrv_banner(void) { printf("Network UPS Tools - Best UPS driver %s (%s)\n", - DRV_VERSION, UPS_VERSION); + DRV_VERSION, upsversion()); } void upsdrv_initups(void) Index: drivers/cpsups.c =================================================================== --- drivers/cpsups.c (revision 916) +++ drivers/cpsups.c (working copy) @@ -464,7 +464,7 @@ void upsdrv_banner(void) { printf("Network UPS Tools - CyberPower text protocol UPS driver %s (%s)\...

...; -- > Charles Lepple > clepple at gmail sudo macosx-ups -DDDD -a cyberpower Network UPS Tools - Mac OS X UPS meta-driver 1.0 (2.6.5-Unversioned directory) Warning: This is an experimental driver. Some features may not function correctly. 0.000000 debug level is '4' 0.000233 upsdrv_initups(): Power Sources blob: <CFArray 0x7ffd18605480 [0x7fff7443bed0]>{type = immutable, count = 1, values = ( 0 : <CFBasicHash 0x7ffd18605360 [0x7fff7443bed0]>{type = immutable dict, count = 10, entries => 0 : <CFString 0x7ffd18605800 [0x7fff7443bed0]>{contents = "Voltage&quo...

It look to me that overwriting UPSTYPE CP signal or polarity in ups.conf have no effect. Looking at drivers/main.c source show that &upstab[upstype].line_norm is set to custom CP in initinfo() only _AFTER_ the serial signals are actually set by upsdrv_initups().

It look to me that overwriting UPSTYPE CP signal or polarity in ups.conf have no effect. Looking at drivers/main.c source show that &upstab[upstype].line_norm is set to custom CP in initinfo() only _AFTER_ the serial signals are actually set by upsdrv_initups().

...ted entirely in 'nutdrv_qx.c'. With regard to 'protocols', nutdrv_qx works like this: - 'nutdrv_qx.c''s `subdriver_list` lists the various (#include'd) 'protocols' the driver supports. - Once nutdrv_qx has set up the communication with a supported device in `upsdrv_initups()` (see below, for serial or USB devices), it gives all (unless otherwise instructed by the user) 'protocols' in `subdriver_list` a few tries by calling their 'claim()' function (which usually tries to read some vars from the device to see if it's actually 'speaking' tha...

Dear Daniele, I'm trying to create a subdriver for 'nutdrv_qx' instead of modifying the Blazer as you suggested, but i honestly don't understand how to integrate usb-serial devices (some of our UPSs have USB but serial protocol Q1). i understand the serial version but not the USB one. i also checked the "Claim" function, but i can't see drivers that uses the VID

...gid_fix", "Apply the language ID workaround to the krauler subdriver (0x409 or 0x4095)"); + +    addvar(VAR_VALUE, "buflen_fix", "Apply the buflen workaround to the krauler subdriver"); +  #endif    /* QX_USB */  #ifdef QX_SERIAL @@ -1822,7 +1834,8 @@ void    upsdrv_initups(void)          getval("product") ||          getval("serial") ||          getval("bus") || -        getval("langid_fix") +        getval("langid_fix") || +        getval("buflen_fix")      ) {          /* USB */          is_usb = 1;...

Here is the upsc output: # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000 debug level is '2' 0.000327 SNMP UPS driver : entering upsdrv_initups() 0.000341 SNMP UPS driver : entering nut_snmp_init(snmp-ups) 0.056112 SNMP UPS driver : entering load_mib2nut(auto) 0.056126 trying the new match_sysoid() method 1.119440 match_sysoid: device sysOID value = .1.3.6.1.4.1.318 1.119456 match_sysoid: checking MIB apc...

...on 0x00007fff8a074e24 ___forwarding___ + 1028 4 CoreFoundation 0x00007fff8a074998 _CF_forwarding_prep_0 + 120 5 CoreFoundation 0x00007fff89ffd11d CFStringGetCString + 173 6 macosx-ups 0x0000000104158ebb upsdrv_initups + 409 7 macosx-ups 0x0000000104159bd2 main + 1040 8 libdyld.dylib 0x00007fff9083e5c9 start + 1 ) libc++abi.dylib: terminating with uncaught exception of type NSException Abort trap: 6

I recently upgraded from nut-2.4.1 to 2.4.3 and my UPS stopped working. usbhid-ups now fails two communicate with the UPS: With 2.4.1: # /sbin/usbhid-ups -D -a auto Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '1' upsdrv_initups... Using subdriver: Belkin HID 0.12 Path: UPS.BELKINConfig.BELKINConfigVoltage, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 230.000000 Path: UPS.BELKINConfig.BELKINConfigFrequency, Type: Feature, ReportID: 0x02, Offset: 0, Size: 8, Value: 50.000000 Path: UPS.BELKINConfig.BELKINConfigA...

...Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 send_to_all: SETINFO driver.parameter.port "auto" 0.000027 send_to_all: SETINFO driver.parameter.productid "3016" 0.000044 debug level is '6' 0.000510 upsdrv_initups... 0.000884 Checking device (09AE/3016) (/dev/usb//dev/ugen1.3) 0.023325 - VendorID: 09ae 0.023348 - ProductID: 3016 0.023353 - Manufacturer: Tripp Lite 0.023357 - Product: TRIPP LITE UPS 0.023363 - Serial Number: unknown 0.023367 - Bus: /dev/usb...

...-x vendor=X, vendorid=X, product=X, productid=X, serial=X */      nut_usb_addvars(); -    addvar(VAR_VALUE, "langid_fix", "Apply the language ID workaround to the krauler subdriver (0x409 or 0x4095)");  #endif    /* QX_USB */  #ifdef QX_SERIAL @@ -1822,7 +1787,8 @@ void    upsdrv_initups(void)          getval("product") ||          getval("serial") ||          getval("bus") || -        getval("langid_fix") +        getval("langid_fix") || +        getval("buflen_fix")      ) {          /* USB */          is_usb = 1;...

...et sysroot"? [Thread debugging using libthread_db enabled] Using host libthread_db library "/usr/lib/libthread_db.so.1". Network UPS Tools - Generic SNMP UPS driver 0.71 (2.7.1-signed-54-g348cd84) 0.000000 debug level is '3' 0.002205 SNMP UPS driver : entering upsdrv_initups() 0.002374 SNMP UPS driver : entering nut_snmp_init(snmp-ups) 0.025728 SNMP UPS driver : entering load_mib2nut(auto) 0.025765 trying the new match_sysoid() method 0.025785 Entering nut_snmp_get_str() 0.025804 nut_snmp_get(.1.3.6.1.2.1.1.2.0) 0.025823...

On Tue, 8 Oct 2013, Philip Tait wrote: > Here is the upsc output: > > # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > 0.000000 debug level is '2' > 0.000327 SNMP UPS driver : entering upsdrv_initups() [snip] > 4.457750 No supported device detected I'm using a APC smart ups with a ap9630 card here just fine. How about showing us the irs2-ups1 entry in ups.conf. -- Tim Rice Multitalents tim at multitalents.net

...d patch, from Brian R. Smith and Aur?lien Grenotton) ... > + if (testvar("langid_fix")) { > + /* Hardcode lang to 0x4095 */ > + ret = usb_get_string(udev, command[i].index, 0x4095, buf, buflen); > + } Arnaud, Could this code use the langid_fix value which is set in upsdrv_initups() instead of 0x4095? Or am I misunderstanding how this is supposed to work? - Charles

On Jun 27, 2015, at 9:17 AM, Charles Lepple <clepple at gmail.com> wrote: > On Jun 26, 2015, at 11:07 PM, Sundeep Mediratta <smedius at gmail.com> wrote: > >> 0.000233 upsdrv_initups(): Power Sources blob: >> <CFArray 0x7ffd18605480 [0x7fff7443bed0]>{type = immutable, count = 1, values = ( >> 0 : <CFBasicHash 0x7ffd18605360 [0x7fff7443bed0]>{type = immutable dict, count = 10, >> entries => > > Thanks. There is a subtle difference in the...