Displaying 2 results from an estimated 2 matches for "ups_snmptrapd".
2017 Jan 10
0
NUT Client shuts down when performing runtime calibration on APC UPS
...uot;Shutdown server if power loss is 5 min" (usually this would be done with upsmon calling upssched, which would start a 5 min. timer), so is it possible that the QNAP firmware has another NUT client that is monitoring for an "OB" status that lasts for more than five minutes?
Also, ups_snmptrapd.conf is not a standard NUT feature.
You could use the Debian test system to check to see if the driver eventually publishes an "OB LB" status by replacing the SHUTDOWNCMD with something innocuous, like "logger" or "wall".
If the Debian system does not run the SHUTDOW...
2017 Jan 09
2
NUT Client shuts down when performing runtime calibration on APC UPS
...t is on calibration is there. Why the NAS still shuts down after 5min. I cannot understand, but maybe you can help me. I give here the settings in the QNAP nut configuration files. I hope I've got the correct files, since they are not located at the normal place:
[/mnt/HDA_ROOT/.config] # more ups_snmptrapd.conf
#
# use fully qualified prefix... just to be safe
#
traphandle .1.3.6.1.4.1.318.0.5 /sbin/ups_snmptrap_handler POWER_LOST
traphandle .1.3.6.1.4.1.318.0.9 /sbin/ups_snmptrap_handler POWER_RESTORED
traphandle .1.3.6.1.4.1.318.0.7 /sbin/ups_snmptrap_handler BATTERY_LOW
traphandle .1.3.6.1.4.1.318...