search for: ups_1000

...ndows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave MINSUPPLIES 1 SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe /t 600 /s /d u:6:11" NOTIFYCMD C:\\NUT\\notify.cmd POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG C:\\NUT\\killpower NOTIFYMSG ONLINE "UPS %s on l...

...s. Upssched is not executed. I > > have 2 scripts, 1 for notification in upsmon and second for scheduling > > in upssched. Monitoring is working fine, script write to log. I'm > > using binary windows installer 2.6.5-6 from NUT. > > > --- upsmon.conf > > MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave > > MINSUPPLIES 1 > > SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe /t 600 /s /d u:6:11" > > NOTIFYCMD C:\\NUT\\notify.cmd > > NOTIFYCMD would normally point to the executable upssched binary. upssched binna...

...t input/output voltages and load for the C 1500 unit. > upsc also reports these values only for model 1000, not for 1500. Battery charge is and runtime are reported. For the 1000, do the values match this page? http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/Smart-UPS_1000.html It doesn't look like we have an entry for a C1500 yet. Would you care to submit the output of upsc, upsrw and upscmd -l? > Is this a limitation of the driver, or is there way to get these data? The driver reports values with standard USB HID names. It is possible that your UPS report...

Hi, I have setup NUT in netserver mode on debian wheezy with two APC UPS units connected to it by usb. lsusb identifies the units as Smart-UPS 1000 and Smart-UPS C1500. It appears these do not use the smart protocol and usbhid-ups is the correct driver to use. System: Debian wheezy with stock version of nut (Version: 2.6.4-2.3+deb7u1) Everything works rather well, except that the

...oblem with upssched on windows. Upssched is not executed. I > have 2 scripts, 1 for notification in upsmon and second for scheduling > in upssched. Monitoring is working fine, script write to log. I'm > using binary windows installer 2.6.5-6 from NUT. > --- upsmon.conf > MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave > MINSUPPLIES 1 > SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe /t 600 /s /d u:6:11" > NOTIFYCMD C:\\NUT\\notify.cmd NOTIFYCMD would normally point to the executable upssched binary. > --- upssched.conf > CMDSCRIPT...

Hi all, I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. Since on all my work I figure out the following: from Network UPS Tools upscmd 2.4.1 [~] # upscmd -l qnapups Instant commands supported on UPS [qnapups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use

Hi Charles, Thanks for your response. > For the 1000, do the values match this page? > > > http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/Smart-UPS_1000.html > > Yes it does (except that mine is a 120 V model, so input/output voltage is about 125) It doesn't look like we have an entry for a C1500 yet. Would you care to > submit the output of upsc, upsrw and upscmd -l? > Here it is $upscmd -l apc1500 Instant commands supported on...