search for: updgrade

Kelly Lesperance wrote: > I?ve posted this on the forums at > https://www.centos.org/forums/viewtopic.php?f=47&t=57926&p=244614#p244614 > - posting to the list in the hopes of getting more eyeballs on it. > > We have a cluster of 23 HP DL380p Gen8 hosts running Kafka. Basic specs: > > 2x E5-2650 > 128 GB RAM > 12 x 4 TB 7200 RPM SATA drives connected to an HP

Kelly Lesperance wrote: > I?ve posted this on the forums at > https://www.centos.org/forums/viewtopic.php?f=47&t=57926&p=244614#p244614 > - posting to the list in the hopes of getting more eyeballs on it. > > We have a cluster of 23 HP DL380p Gen8 hosts running Kafka. Basic specs: > > 2x E5-2650 > 128 GB RAM > 12 x 4 TB 7200 RPM SATA drives connected to an HP

What is the HBA the drives are attached to? Have you done a quick benchmark on a single disk to check if this is a raid problem or further down the stack? Regards, Dennis On 25.05.2016 19:26, Kelly Lesperance wrote: > [merging] > > The HBA the drives are attached to has no configuration that I?m aware of. We would have had to accidentally change 23 of them ? > > Thanks, >

On 5/25/2016 11:44 AM, Kelly Lesperance wrote: > The HBA is an HP H220. OH. its a very good idea to verify the driver is at the same revision level as the firmware. not 100% sure how you do this under CentOS, my H220 system is running FreeBSD, and is at revision P20, both firmware and driver. HP's firmware, at least what I could find, was a fairly old P14 or something, so I

LSI/Avago?s web pages don?t have any downloads for the SAS2308, so I think I?m out of luck wrt MegaRAID. Bounced the node, confirmed MPT Firmware 15.10.09.00-IT. HP Driver is v 15.10.04.00. Both are the latest from HP. Unsure why, but the module itself reports version 20.100.00.00: [root at r1k1 sys] # cat module/mpt2sas/version 20.100.00.00 On 2016-05-25, 3:20 PM, "centos-bounces at

Already done ? they?re not being very helpful, as we don?t have a support contract, just standard warranty. On 2016-05-25, 4:27 PM, "centos-bounces at centos.org on behalf of m.roth at 5-cent.us" <centos-bounces at centos.org on behalf of m.roth at 5-cent.us> wrote: >Kelly Lesperance wrote: >> LSI/Avago?s web pages don?t have any downloads for the SAS2308, so I think

On 05/25/2016 09:54 AM, Kelly Lesperance wrote: > What we're seeing is that when the weekly raid-check script executes, performance nose dives, and I/O wait skyrockets. The raid check starts out fairly fast (20000K/sec - the limit that's been set), but then quickly drops down to about 4000K/Sec. dev.raid.speed sysctls are at the defaults: It looks like some pretty heavy writes are

Software RAID 10. Servers are HP DL380 Gen 8s, with 12x4 TB 7200 RPM drives. On 2016-06-01, 3:52 PM, "centos-bounces at centos.org on behalf of m.roth at 5-cent.us" <centos-bounces at centos.org on behalf of m.roth at 5-cent.us> wrote: >Kelly Lesperance wrote: >> I did some additional testing - I stopped Kafka on the host, and kicked >> off a disk check, and it

Hdparm didn?t get far: [root at r1k1 ~] # hdparm -tT /dev/sda /dev/sda: Timing cached reads: Alarm clock [root at r1k1 ~] # On 2016-05-25, 2:44 PM, "Kelly Lesperance" <klesperance at blackberry.com> wrote: >The HBA is an HP H220. > >We haven?t really benchmarked individual drives ? all 12 drives are utilized in one RAID-10 array, I?m unsure how we would test

On 2016-06-01 20:07, Kelly Lesperance wrote: > Software RAID 10. Servers are HP DL380 Gen 8s, with 12x4 TB 7200 RPM drives. > > On 2016-06-01, 3:52 PM, "centos-bounces at centos.org on behalf of m.roth at 5-cent.us" <centos-bounces at centos.org on behalf of m.roth at 5-cent.us> wrote: > > >Kelly Lesperance wrote: > >> I did some additional testing - I

John R Pierce wrote: > On 5/25/2016 11:44 AM, Kelly Lesperance wrote: >> The HBA is an HP H220. > > OH. its a very good idea to verify the driver is at the same revision > level as the firmware. not 100% sure how you do this under CentOS, my > H220 system is running FreeBSD, and is at revision P20, both firmware > and driver. HP's firmware, at least what I

Kelly Lesperance wrote: > LSI/Avago?s web pages don?t have any downloads for the SAS2308, so I think > I?m out of luck wrt MegaRAID. > > Bounced the node, confirmed MPT Firmware 15.10.09.00-IT. > HP Driver is v 15.10.04.00. > > Both are the latest from HP. > > Unsure why, but the module itself reports version 20.100.00.00: > > [root at r1k1 sys] # cat

Kelly Lesperance wrote: > I did some additional testing - I stopped Kafka on the host, and kicked > off a disk check, and it ran at the expected speed overnight. I started > kafka this morning, and the raid check's speed immediately dropped down to > ~2000K/Sec. > > I then enabled the write-back cache on the drives (hdparm -W1 /dev/sd*). > The raid check is now running

[merging] The HBA the drives are attached to has no configuration that I?m aware of. We would have had to accidentally change 23 of them ? Thanks, Kelly On 2016-05-25, 1:25 PM, "Kelly Lesperance" <klesperance at blackberry.com> wrote: >They are: > >[root at r1k1 ~] # hdparm -I /dev/sda > >/dev/sda: > >ATA device, with non-removable media > Model

The HBA is an HP H220. We haven?t really benchmarked individual drives ? all 12 drives are utilized in one RAID-10 array, I?m unsure how we would test individual drives without breaking the array. Trying ?hdparm -tT /dev/sda? now ? it?s been running for 25 minutes so far? Kelly On 2016-05-25, 2:12 PM, "centos-bounces at centos.org on behalf of Dennis Jacobfeuerborn"

On 2016-05-25 19:13, Kelly Lesperance wrote: > Hdparm didn?t get far: > > [root at r1k1 ~] # hdparm -tT /dev/sda > > /dev/sda: > Timing cached reads: Alarm clock > [root at r1k1 ~] # Hi Kelly, Try running 'iostat -xdmc 1'. Look for a single drive that has substantially greater await than ~10msec. If all the drives except one are taking 6-8msec, but one is very

I did some additional testing - I stopped Kafka on the host, and kicked off a disk check, and it ran at the expected speed overnight. I started kafka this morning, and the raid check's speed immediately dropped down to ~2000K/Sec. I then enabled the write-back cache on the drives (hdparm -W1 /dev/sd*). The raid check is now running between 100000K/Sec and 200000K/Sec, and has been for several

Hai L?a, Sorry for the late reply, im back at the office and notice your last mails. Everything up and running now? Greetz, Louis > -----Oorspronkelijk bericht----- > Van: Lmloge [mailto:lmloge at orange.fr] > Verzonden: maandag 23 december 2019 11:57 > Aan: L.P.H. van Belle; samba at lists.samba.org > Onderwerp: Re: [Samba] Upgrading from Debian Stretch to > Buster,

Hello Louis, If I may, can you bear with me a bit longer? I have two machines MACHINE_1 and MACHINE_2 at two different geographical places. Both are now running Samba version 4.11.4-Debian. Thanks a lot for that! On MACHINE_1, two years ago I did: # samba-tool domain provision --use-rfc2307 --domain=<DOMAINAME> --realm=<REALM> --dns-backend=BIND9_DLZ --adminpass=<PASSWORD>

...ar I can't get the WinPE to load. *label WinPE* * com32 linux.c32 winpe/wimboot* * append wimboot* * initrdfile=winpe/bootmgr,winpe/bcd,winpe/boot.sdi,winpe/winpe.wim* This does nothing, it's probably to be expected as I'm trying to sidestep the fact that I'm supposed to updgrade to 5.01 acc. to this guide <http://www.howtogeek.com/162070/it-geek-how-to-network-boot-pxe-the-winpe-recovery-disk-with-pxelinux-v5-wimboot/> so I'm taking the files and dumping them into the winpe dir and link them there. Other things I see running here is UBCD that I can boot into but...