search for: unplan

...st machines, one XP and one 2003. XP works beautifully: Thank you for the development efforts. 2003 works almost as well, with one exception. When I either xm reboot or xm shutdown and subsequently restart the virtual machine, at first login I get this dialogue: The system has restarted after an unplanned shutdown. A log of this event has been created. *Please tell Microsoft about this problem.* (blah blah blah) Send Error Report | Don''t Send I haven''t found anything describing how I might instruct the shutdown command to make it a ''planned'' one, given that M...

Hi, My ISP had an unplanned network outage starting around 2am this morning that took all connectivity offline -- their router ran out of memory and took out all BGP routes. Their router has since been rebooted and packets are now flowing again. Sorry for any inconvenience this may have caused. -derek -- Derek...

Hi, Many of you may have noticed that it was pretty quiet over the weekend. AT&T (my ISP) had a fiber cut around 1am Saturday Night (Sunday Morning) that took out my network. They kept pushing the expected resolution until 5am today, but the network was repaired at 7:09pm last night at which point everything should have come back. This outage affected code, which runs email, wiki, and git

We're having some intermittent network difficulties that may affect the Asterisk community services listed below. You may experience an outage for a few minutes sometime during the next 30 minutes to an hour while we swap out some networking equipment. We apologize for any inconvenience. The services affected may include: bamboo.asterisk.org code.asterisk.org downloads.digium.com

Starting roughly at 2:20 PM CDT, the Asterisk community services listed below may have intermittent availability due to unknown causes for an unknown length of time. Digium's IT staff are working quickly to troubleshoot the problem. Another announcement will be made when services are restored. The affected services are: * All community services provided by Digium, including, but not limited

On Tue, Sep 10, 2013 at 2:39 PM, Digium's Asterisk Development Team <asteriskteam at digium.com> wrote: > Starting roughly at 2:20 PM CDT, the Asterisk community services listed > below may have intermittent availability due to unknown causes for an unknown > length of time. Digium's IT staff are working quickly to troubleshoot > the problem. > > Another

Good morning, GnuCashers, Some (many?) of you may have noticed the outage of 'code.gnucash.org' starting with a lot of packet loss on Thursday and escalating into a complete outage by Friday. This took out our Subversion, Wiki, Email List, everything server. Well, as of 2:15pm US/EDT on Saturday (yesterday) everything should be back to normal and operational. If you don't want to

...dates, maintenance, and unexpected reboots sometime host machines are restarted.? I can easily envision a scenario where HostX needs some critical packages updated or is acting up.? I migrate guest0, guest1, guest2 etc. from HostX to HostY.? Then, in either a planned (i.e. scheduled maintenance) or unplanned (i.e. unplanned reboot) event reboots HostX. Unfortunately guest0, guest1 and guest2 are all set to autostart on HostX but they're currently running on HostY when HostX boots.... etc etc etc ??? Is anyone using effective packages, scripts or techniques which help maintain that all guest ar...

...a/about/wincent/weblog/archives/2007/05/ behaviourdriven.php I''m a C/Objective-C programmer who knows a bit of Ruby, almost nothing about Rails, and in BDD I can really only claim "new but interested" status. It''s not scripted, it''s totally improvised and unplanned, so there are plenty of mistakes, sub-optimal ideas and things which I mis- said... but hopefully people will get the idea. I think most of the people who read my weblog are fellow Objective-C programmers, but I wanted people to see the kind of workflow you can achieve with RSpec, especi...

We have samba 2.0.0 running on Solaris 2.6 (Sparc) sharing out various directories and user homes. Recently I've set it up for Win98 logins and all this is working fine. Unfortunately this also means that if the server has to go down so do the clients, as we're pushing the users to use the server as much as possible. My question is what would be the best way to set up a Backup Samba

...using fsync(2) may not be providing you with the protection you want after a power loss event. Which might not be a problem if you have a handset with a non-removable eMMC device and a non-removable battery that can't fly out when you drop the phone, but for devices which which can easily have unplanned power failure, it may every well be the case that you're going to be badly burned across a power fail event anyway. So the next question I would ask you is whether you care about unplanned power failures. If so, you probably want to test your CF cards to make sure they actually will do the...

...round two minutes. I''d like to avoid needing to take this time on every bootup (which is more often than you''d think, we''ve got quite a bit of construction happening, which necessitates bringing everything down periodically). This would also be painful in the event of unplanned downtime for one of our Thors. so, basically, my question is: Is there a way to quickly or permanently disable the write cache on every disk in an X4540? Thanks, -Greg

On Oct 8, 2014, at 10:28 AM, Jelle de Jong <jelledejong at powercraft.nl> wrote: > Hello everyone, > > I been using CF cards for almost more then 7 years now with ext > file-system without any major problems on ALIX boards. > > Last year I took 30 other systems in production with ext4 and the CF > cards been dropping out pretty fast, it may have been a bad batch but

...ontrol production servers running: - CentOS 5.5 - Puppet 2.6.3 - Yum 3.2.22 We would like to specify that certain versions of packages be loaded on a system. Our requirement is to have fixed versions of all critical packages upon which our applications depend. We do not want any surprises due to unplanned updates to the latest and greatest release of a critical software dependency. We are using manifests with a package resource like: package { "mysql": ensure => "5.0.77-4.el5_5.3", } The problem we run into is that when one server is loaded the manifest and puppet works...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everyone, I been using CF cards for almost more then 7 years now with ext file-system without any major problems on ALIX boards. Last year I took 30 other systems in production with ext4 and the CF cards been dropping out pretty fast, it may have been a bad batch but I do want to look at it. I don't think the devices writes a lot of IO (is

Hi. I''m all set for doing performance comparsion between Solaris/ZFS and FreeBSD/ZFS. I spend last few weeks on FreeBSD/ZFS optimizations and I think I''m ready. The machine is 1xQuad-core DELL PowerEdge 1950, 2GB RAM, 15 x 74GB-FC-10K accesses via 2x2Gbit FC links. Unfortunately the links to disks are the bottleneck, so I''m going to use not more than 4 disks, probably.

...kups and there is no other DC in the domain. > As I already said: If you don't give more information about the > situation and details, we can't help. Forgive me for being vauge; There is only a single active DC in this domain that was recovered after a hardware failure caused by an unplaned outage. This DC is mostly used for radius authentication and for a simple library lab with 5 computers. The domain has around ~400 users. The real name of the domain is not "domain.of", I just masked it. *Listing of the sysvol folder gives* sysvol # find . . ./domain.of/ ./domain.of/s...

Hello everyone, Due to unplanned maintenance LLVM buildmastrer is about to be restarted. Should be back to normal in few minutes. Sorry for the inconvenience and thanks for understanding. Thanks Galina

On 28.12.2017 16:50, m.roth at 5-cent.us wrote: > Matt wrote: >> I am setting up a new test server. Doing a fresh install from CD onto >> a couple 4TB drives. Would like to try btrfs in a RAID 1 format. Are >> there any how to's on how to do that? > > I was under the impression that upstream was deprecating BTRFS. brtfs was only a technology preview in RHEL 7

...n/xmdomain.cfg.pod.5 --- a/docs/man/xmdomain.cfg.pod.5 Mon Oct 31 09:45:31 2005 +++ b/docs/man/xmdomain.cfg.pod.5 Mon Oct 31 13:32:24 2005 @@ -72,6 +72,57 @@ =item I<builder> +=back + +=head1 DOMAIN SHUTDOWN OPTIONS + +There are 3 options which control domain shutdown (both planned and +unplanned) under certain events. The 3 events currently captured are: + +=over 4 + +=item I<shutdown> + +Triggered on either an I<xm shutdown> or graceful shutdown from inside +the DomU. + +=item I<reboot> + +Triggered on either an I<xm reboot> or graceful reboot from inside the +...