search for: unisi

Everyone, I have configured a new SLES 10 server exactly the same as I had previously configured a SLES 9 server. The only difference is the version of samba. On the SLES 10 server, I am running the 3.0.23c level, the SLES 9 server is behind a little. My problem is with connecting to other AD domains. Only my default domain has a valid sequence number. All the other domains are

Unisys-Lead Engineer Location: Roseville, MN Unisys is looking for a Compiler Specialist for our facility in Roseville, MN. We have a ClearPath mainframe product line that has been running on custom CMOS CPUs. The Unisys 36-bit OS2200 CISC mainframe architecture has been evolving for many years and is too expensive to continue implementing in custom silicon, so we have also produced a version

I am seeing some extremely slow logons to my SUSE servers. All are configured exactly the same. When I attempt to log on, I can enter my domain (AD) account without any problems. I then enter my password and sit and wait for several minutes until it eventually takes me to my desktop. In attempting to debug the problem, we have been able to see millions of calls to the domain controller. They

...it's empty: moloch*CLI> sip show registry Host Username Refresh State moloch*CLI> If i try, from 203, calling 201 this is what happens: ===========================8<=================================== moloch*CLI> Sip read: INVITE sip:201@asb.unisi.it SIP/2.0 Via: SIP/2.0/UDP 192.167.125.9:5062;branch=z9hG4bK78ED0E83 CSeq: 7665 INVITE To: <sip:201@asb.unisi.it> Content-Type: application/sdp From: "203" <sip:203@asb.unisi.it>;tag=2B558754 Call-ID: 499575437@192.167.125.9 Subject: sip:203@asb.unisi.it Content-Length: 187 U...

...192.167.125.12 D 255.255.255.255 5060 OK (3 ms) moloch*CLI> as you can see, 201 and 203 are on-line but, if i call from 203 to 201, i immediately go to voicemail instead of doing call to 201. Here's the SIP call flow: moloch*CLI> Sip read: INVITE sip:201@asb.unisi.it SIP/2.0 Via: SIP/2.0/UDP 192.167.125.9:5062;branch=z9hG4bK64FE3538 CSeq: 1114 INVITE To: <sip:201@asb.unisi.it> Content-Type: application/sdp From: "203" <sip:203@asb.unisi.it>;tag=1CE28F8 Call-ID: 1646594512@192.167.125.9 Subject: sip:203@asb.unisi.it Content-Length: 187 U...

I've got a share from a Unisys MCP Mainframe mounted with mount.cifs from RHEL 6.1 (samba-common-3.5.6-86.el6.x86_64). when I try to touch a file, it creates the file, but reports an error - "setting times of `testfile.txt': Permission denied" strace on the touch command shows that it is erroring out on the utimensat() call utimensat(0, NULL, NULL, 0) = -1 EACCES (Permission

From: Borislav Petkov <bp at suse.de> Use boot_cpu_has() instead. Signed-off-by: Borislav Petkov <bp at suse.de> Cc: virtualization at lists.linux-foundation.org Cc: sparmaintainer at unisys.com --- arch/x86/events/intel/cstate.c | 2 +- arch/x86/events/intel/uncore.c | 2 +- arch/x86/include/asm/cpufeature.h | 1 -

From: Borislav Petkov <bp at suse.de> Use boot_cpu_has() instead. Signed-off-by: Borislav Petkov <bp at suse.de> Cc: virtualization at lists.linux-foundation.org Cc: sparmaintainer at unisys.com --- arch/x86/events/intel/cstate.c | 2 +- arch/x86/events/intel/uncore.c | 2 +- arch/x86/include/asm/cpufeature.h | 1 -

hyperv_net: - set min/max_mtu, per Haiyang, after rndis_filter_device_add virtio_net: - set min/max_mtu - remove virtnet_change_mtu vmxnet3: - set min/max_mtu xen-netback: - min_mtu = 0, max_mtu = 65517 xen-netfront: - min_mtu = 0, max_mtu = 65535 unisys/visor: - clean up defines a little to not clash with network core or add redundat definitions CC: netdev at vger.kernel.org CC:

hyperv_net: - set min/max_mtu, per Haiyang, after rndis_filter_device_add virtio_net: - set min/max_mtu - remove virtnet_change_mtu vmxnet3: - set min/max_mtu xen-netback: - min_mtu = 0, max_mtu = 65517 xen-netfront: - min_mtu = 0, max_mtu = 65535 unisys/visor: - clean up defines a little to not clash with network core or add redundat definitions CC: netdev at vger.kernel.org CC:

John, One of my previous jobs was at Unisys doing a dynamic translator for the Univac 1100 / 2200 series computers. We chose LLVM for the base of the translator for its modularity, optimizations, and x86 code generation. We wrote a front-end that parsed Univac instructions and generated IR for them. It all ran on X86-Linux boxes which with some special peripheral adaptors were then

Here is a patch for clustered xAPIC and Unisys ES7000 support in Xen. To turn the features on add CONFIG_X86_CLUSTERED_APIC and CONFIG_ES7000 defines to xen/include/asm-x86/config.h Signed off by Aravindh Puthiyaparambil <aravindh.puthiyaparambil@unisys.com> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

Hi all! I am from the Windows world and am trying to migrate to Linux and have done a fairly good job so far. My recent challenge is that I have built a Samba file/print server that works very well on my internal network but when I VPN into the network remotely I am unable to access the server via it's server name. What is driving me crazy is the fact that the last of my Windows

I am trying to authenticate a user in a domain (EU) other than my default domain (NA). I am at a loss as to what may be wrong at this point. When I run a wbinfo -sequence, I see the following: linux:~ # wbinfo --sequence LAC : DISCONNECTED EU : DISCONNECTED AP : DISCONNECTED UIS : 19895750 TRIMBLRDLINUX : 1 BUILTIN : 1 NA : 15410431 If I try a kinit, here is the output:

On Thu, Oct 20, 2016 at 01:55:21PM -0400, Jarod Wilson wrote: > hyperv_net: > - set min/max_mtu, per Haiyang, after rndis_filter_device_add > > virtio_net: > - set min/max_mtu > - remove virtnet_change_mtu > vmxnet3: > - set min/max_mtu > > xen-netback: > - min_mtu = 0, max_mtu = 65517 > > xen-netfront: > - min_mtu = 0, max_mtu = 65535 > >

Hello, ahgu >I have a unisys UPS, I probed the RS232 and notice that pin 2, >(receive data) is going from -6v (OL) to 12v(OB), but I don't see the >setting for the genericups. Seems nobody else is using the RD pin? >Any driver I can use? >Thanks >-Andrew Try RX as signal name (not RD). -- Best regards, Sergiy mailto:rendol@mail.zp.ua

During the past 12 months we have been doing some exciting research to accelerate the execution performance of a instruction stream for a 36-bit CISC mainframe architecture being emulated on Intel platforms. This research has been focused in the area of dynamic binary translation. We are using the LLVM IR and JIT in our project to execute thousands of small compiles to optimize this execution

Hello, We have a server Unix Unisys SMP6400 connected with 60 PC Win95. Samba 1.9.17 installed since Nov 97 is working fine. Now I wish for install Samba 2.0, but the shell "configure" don't recognize our System. I get the following message : # ./configure loading cache ./config.cache checking for gcc... no checking for cc... cc checking whether the C compiler (cc -O ) works...

Dear all, I regret that I am very new to this tool from the install side. I have so far altered shares on a running machine only. I have (thanks to Joss for some help already) installed version 3.4.3 under AIX 6.1 giving it our preferred base directory of /opt/freeware/samba/3.4.3 I have copied over the smb.conf file from the source machine (AIX 5.2 / Samba 2.0.7) and tweaked the content of

We need to save a file from Windows server 2000 to a Unisys mainframe. I have seen bits and pieces on the web that suggest this may be possible but nothing definitive. Can somebody advise? If not Samba, is there another software that will do the same thing? We currently use Samba to save files from Windows to Unix. Thanks very much. Steve