search for: underclocked

Hello everybody, today I had some time to test Peter´s decoding plugin on a very slow machine. My setup: - Pentium "classic" @ 50 MHz (underclocked!) - Mainboard with Mercury Chipset (I think) - CD-ROM and HDD in PIO-Mode (CPU intensive) - MAD16 Soundcard (ISA slot, CPU intensive) - Win95B, Winamp 2.76, Decoder Plugin 1.16 (RC 2) The hardware setup is something like the "worst case possible" as data transfer is CPU intensive (PI...

I updated my home server with the 6.4 CR packages, and I've experienced 3 or 4 hard lockups since. The server is a fanless VIA C7 "CentaurHauls" system with a 1GHz CPU underclocked to 800MHz and 1GB of RAM. It has a dual-port Intel 82546GB NIC in its single PCI slot. (It also has an on-board Realtek RTL-8110SC/8169SC NIC that is plugged in, but doesn't currently have an IP address configured.) This server provides a number of services -- DNS, DHCP, routing between VLAN...

Is this just because rsync gives it a work out? I may drop using this motherboard, since the store will not replace it, and thinks it's a hard drive problem, and the board has no way to underclock even as a test. What about changing from 1300 MHz to 800Mhz AThlon processor... think that would help an AZZA KT3 ABX motherboard work easier? John G Austex

On 01/28/2015 03:30 PM, Frank Cox wrote: > ... > Having never used DisplayPort before, I'm wondering if this means that > if I purchase the BenQ monitor above, or something similar, I can then > reasonably expect to plug it in and have it just-work with my Centos 7 > setup. > I like the full-size DisplayPort connector the best of any video connector I've dealt with,

Hey everybody, I've been trying to compile wine since version 1.0 and have gotten crashes during the make command, about 20 minutes in. Very frustrating. I'm running Fedora 9, and I believe gcc version 4.3.0.8. Is this a gcc problem? If so, what can I do to fix it? Output of failed make command follows... gcc -c -I. -I. -I../../../include -I../../../include -D_REENTRANT -fPIC -Wall

Let's try this from scratch: I've been having a problem for the past several days with a shellscript that has been working without problems for the 11 months. It's working until the comes up with the following error: total: matches=349 tag_hits=4061 false_alarms=1 data=6628073 ERROR: file corruption in public_html/reports/analog/analog.conf. File changed during transfer?

How well do you think asterisk could run on a miniITX board like the ones linked below with the call volume of say a small doctors office or something? http://www.mini-box.com/s.nl/sc.8/category.15/.f - Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/638e4426/attachment.htm

Hello folks Anyone know if this would be enough to decode oggs? AMD Elan SC520 133 MHz If not, what seems to be the lower limit required for decoding oggs? Many thanks, Kerry. <p>--- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-request@xiph.org' containing only

Since my current monitor appears to be slowly dying, I'm looking for a replacement. I generally use hardware replacement as an excuse to get something bigger/better/faster than what I had before, so I'm currently considering something like a BenQ GW2765HT. The manual for my Intel motherboard has this to say about DisplayPort on the built-in graphics controller: QUOTE: DisplayPort?s

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

I have been reading asterisks and everything I can get my hands on for the past week. I want to know what class processor is the bare minimum I need for a four port Asterisk installation? Thanks

I have this server I need to put to work. The option I have is to make it work as a small office PBX with SIP users and a Digium E1 Card for PSTN service. 24 SIP users and one E1 card in an Intel 945board (533 Front side bus) with 1GB DDR 533mhz of ram, one Pentium Dual Core 2.66 ghz (FSB 533MHZ) and two 80GB SATA disks. Can the box sustain the load? I can add another 1gb of ram if necessary.

Hello, I have been working on VGA-passthrough in the last month. When Xen was at his version 3.5 there was a few patches to make this work for some graphic cards using the patches developed by Han Weidong and posted here (http://lists.xensource.com/archives/html/xen-devel/2009-08/msg01176.html) and the same patches posted file by file are here

Hello, I have been working on VGA-passthrough in the last month. When Xen was at his version 3.5 there was a few patches to make this work for some graphic cards using the patches developed by Han Weidong and posted here (http://lists.xensource.com/archives/html/xen-devel/2009-08/msg01176.html) and the same patches posted file by file are here