search for: uncorrect

dmesg is not reporting any issues. The /proc/mdstat looks fine. md0 : active raid1 sdb1[1] sda1[0] X blocks [2/2] [UU] however /var/log/messages says: smartd[3392] Device /dev/sda 20 offline uncorrectable sectors The machine is running fine.. raid array looks good - what is up with smartd? THanks, Jerry

I have few disk that have offline uncorrectables sectors; I found on this page how to identify the sectors and force a write on them to trigger the relocation of bad sectors on the disk: http://smartmontools.sourceforge.net/BadBlockHowTo.txt My question is: since I'm too lazy to follow all the procedure, do you think that a force rew...

Hi, all, The attached patches try to improve the current FLR logic. The idea is: removing the FLR logic from hypervisor and adding the improved logic in Control Panel. The current FLR logic in hypervisor has some issues: 1) Dstate transition is not guaranteed to properly clear the device state; 2) the current code for PCIe FLR is actually buggy: PCI_EXP_DEVSTA_TRPND doesn''t mean the

Hello, We have built R 1.4.1 on Red Hat 7.1 for use on both Red Hat 7.1 and 7.2. Running R on Red Hat 7.2 fails with the following error message: $ R /usr/local/r-1.4.1/lib/R/bin/R.bin: error while loading shared libraries: libreadline.so.4.1: cannot open shared object file: No such file or directory $ This is because Red Hat 7.1 provides readline-4.1 while Red Hat 7.2. provides

I decided, after the last discussion of smartd and S.M.A.R.T. disks, to take a look in my /var/log/messages, and I'm seeing fair bit of this: Sep 10 20:11:23 mhrichter smartd[3361]: Device: /dev/sda, 4294967295 Offline uncorrectable sectors Sep 10 20:41:23 mhrichter smartd[3361]: Device: /dev/hdb, 21 Currently unreadable (pending) sectors Sep 10 20:41:24 mhrichter smartd[3361]: Device: /dev/sda, 4294967295 Currently unreadable (pending) sectors Sep 10 20:41:24 mhrichter smartd[3361]: Device: /dev/sda, 4294967295 Offline un...

...kernel: EDAC MC0: CE row 2, channel 1, label > "": (Branch=0 DRAM-Bank=3 RDWR=Read RAS=240 CAS=6, CE Err=0x2000 > (Correctable Non-Mirrored Demand Data ECC)) I have "yum install edac-utils -y" and I have get this output: > [root at s-virt ~]# edac-util -v > mc0: 0 Uncorrected Errors with no DIMM info > mc0: 0 Corrected Errors with no DIMM info > mc0: csrow0: 0 Uncorrected Errors > mc0: csrow0: ch0: 0 Corrected Errors > mc0: csrow0: ch1: 0 Corrected Errors > mc0: csrow0: ch2: 0 Corrected Errors > mc0: csrow0: ch3: 0 Corrected Errors > mc0: csrow1:...

Hello, SMART error (OfflineUncorrectableSector) detected on host: *************************************************************************** The following warning/error was logged by the smartd daemon: Device: /dev/hdb, 2 Offline uncorrectable sectors For details see host's SYSLOG (default: /var/log/messages). You can also use t...

Hello all! Actually I use dual boot PC with CentOS4 (kernel 2.6.9-11) and WinXP (HDD 20GB, 512MB, PentiumIII 800MHz), but I have the following problem doing the image with g4u ----BEGIN ERROR MESSAGGE---- wd0: (uncorrectable data error) 8951MB 1.59MB/s wd0d: error reading fsbn 18333440 of 18333440 - 18333567 (wd0 bn 18333440; cn 18187 tn 14 sn 62) retrying wd0: (uncorrectable data error) 8951MB 1.59MB/s wd0d: error reading fsbn 18333440 of 18333440 - 18333567 (wd0 bn 18333440; cn 18187 tn 15 sn 52) retrying ---...

Hi, Does anyone know if the cor() function under the stats package adjusts for ties? Specifically, with method="spearman" does R compute the ties adjusted version of Sperman's rank correlation coefficient or the uncorrected version? If not, does anyone know of a function/package that will do this? Thanks! Courtney M.

...llowing error occurs intermittently. I have replaced hard drives and it is still occurring. I'm trying to determine if it's a device conflict, a problem with the motherboard or something else. Can anyone help? hda: dma_intr: status=0x51 {DriveReady SeekComplete Error} hda: dma_intr: 0x40 {Uncorrectable Error}, LBA sect = 32405, sector=32328 end_request: I/O error, dev 03:01 (hda) sector 32405 (this repeats for a whole lot of sectors...) The above error terminates with invalidate: busy buffer Then a kernel panic, then the following message spurious 8259A interrupt: IRQ7 Cheers Simon

...would greatly appreciate the assistance. R Version 2.15.0 (2012-03-30) Platform i386-pc-mingw32/i386 (32-bit ---------------------------------------------------------------------------------------------------------------------------------------------------------- ### Animation of EDEN real time uncorrected data. library(animation) library(ncdf) library(fields) library(maptools) ENP_WCA <- readShapePoly(system.file("U:\\GIS_Data\\GISlayers\\Boundaries_Lines\\EVERareas_Dissolve.shp", package="maptools")[1], proj4String=CRS("+proj=utm +zone17 +datum=WGS84"))...

I can not start my laptop anymore, due to what looks like a physical HD failure. During boot I get: hda: dma_intr: error=0x40 { Uncorrectable Error }, LBAsect=260112, sector 51144 and then JBD: Failed to read block at offset 5864 JBD: recovery failed EXT3-fs: error loading journal then the laptop is frozen. While I understand this drive will need a prompt replacement, I am trying to recover at least the data in the /home directo...

...s MPR (http://www.opensparc.net/pubs/papers/MPR_DSN06.pdf), online-spare RAM or killing/restarting of impacted processes to prevent crashes of whole guests or the whole machine. case I) - Xen reveives a MCE from the CPU 1) Xen MCE handler figures out if error is an correctable error (CE) or uncorrectable error (UE) 2a) error == CE: Xen notifies Dom0 if Dom0 installed an MCA event handler for statistical purpose 2b) error == UE and UE impacts Xen or Dom0: Xen does some self-healing and notifies Dom0 on success if Dom0 installed MCA event handler or Xen panics on...

...nel (0x0 to 0x0) notwithin permissible range <0> HARDWARE ERROR CPU 1: Machine Check Exception: 7 Bank 4: .... RIP 10:<.....> TSC 133eab63c9 ADDR 24fe3d028 This is not a software problem! Run through mcelog --ascii to decode and contact your hardware vendot Kernel panic - not syncing: Uncorrected machine check ------------------------------------------------------------------------- Anyone could tell me how to fix this please ! Help ! Thank you

...(NULL) (87.4.189.202) If you send these lines of code: outdir="c:/pippo" file.path(outdir,"pluto.html") R replies correctly: [1] "c:/pippo/pluto.html" But if you change the first steps to: outdir="" file.path(outdir,"pluto.html") R replies (uncorrectly, I think) [1] "/c:/pippo/pluto.html" This problem influence the R2HTML package too, which, if you send a line as: targetHtml=HTMLInitFile(outdir="",filename="htmlFile",Title ="Title") in windows it submit an error because of file.path() error. Thank yo...

...00 (default 1500 instead)? I am having certain issues on certain hardware where there's no shutting down the affected NICs. Trying to do so or unload the igb module hangs the entire box. But in that case they're throwing AER errors instead of just unit hangs: pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0000 igb 0000:04:00.1: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0401(Requester ID) igb 0000:04:00.1: device [8086:10a7] error status/mask=00004000/00000000 igb 0000:04:00.1: [14] Completion Timeout (First) igb 0000:04:00....

...rogs to latest GIT and tried scrub without success: # btrfs scrub start -B -d /home/ scrub device /dev/sda6 (id 1) done scrub started at Sun Dec 31 23:13:19 2000 and finished after 273 seconds total bytes scrubbed: 548.90MB with 1 errors error details: verify=1 corrected errors: 0, uncorrectable errors: 1, unverified errors: 0 # dmesg after "cat /home/gustavo/file": btrfs no csum found for inode 2957021 start 0 btrfs no csum found for inode 2957021 start 0 btrfs csum failed ino 2957021 extent 85041815552 csum 667310679 wanted 0 mirror 0 btrfs no csum found for inod...

...e numbers most similar to what I get in SPSS: corrected point biserial correlations, cronbach's alpha. I didn't understand what the psychometric package meant by its "discrimination" and "item reliability" numbers output by the item.exam function. Perhaps the former is uncorrected point biserial correlations? They were higher values. I downloaded and inspected the source code for both packages. It was hard to understand what the functions were doing without some comments in the code. Also, would you recommend a book or resource with examples of using R for test analysi...

...n easy way to fix this to avoid rushing the upgrade? Having a single drive is slowing down reads as well, I think. Thanks. Feb 7 15:28:28 server smartd[2980]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 7 15:28:28 server smartd[2980]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors Feb 7 15:58:29 server smartd[2980]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 7 15:58:29 server smartd[2980]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors [root at server ~]# smartctl -H /dev/sda === START OF READ SMART DATA SECTION === SMART ove...

Hello, recently I've installed 7.0 and now I'm observing strange thing with my Internet connection. Access to some sites may be VERY slow or doesn't work at all with different kinds of timeout messages or without messages at all (but other sites works fine). For example, firefox may say "Transferring data from..." message and then "The connection to the server was reset