search for: ultra2

..../lib/libxtra.a $LIBS" fi Solaris doesn't have xmalloc and friends available and so LIBS includes ../lib/libxtra.a. This causes all future invokations of the compiler to fail like so: configure:10955: /opt/SUNWspro/bin/cc -o conftest -fast -g -xs -v -xstrconst -xdepend -xtarget=ultra2 -xarch=v8plusa -xprefetch -fast -g -xs -v -xstrconst -xdepend -xtarget=ultra2 -xarch=v8plusa -xprefetch -D_XPG4_2 -D_XOPEN_SOURCE -D__EXTENSIONS__ -D_BSD_SOURCE -D_ISO9X_SOURCE -D_OSF_SOURCE -D_XOPEN_SOURCE_EXTENDED -fno-strict-aliasing -xildoff -xildoff -xildoff -xildoff conftest.c ../li...

...Ethernet> port 0xdc00-0xdc3f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 17 at device 11.0 on pci0 fxp0: Ethernet address 00:d0:b7:23:18:f5 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe000-0xe0ff mem 0xe4101000-0xe4101fff irq 18 at device 12.0 on pci0 aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc2: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem 0xe4103000-0xe4103fff irq 18 at device 12.1 on pci0 aic7896/97: Ultra2 Wi...

These come courtesy of Sun Studio 11 on Solaris 10 in case you care: "http11.c", line 54: warning: syntax error: empty declaration "http11.c", line 55: warning: syntax error: empty declaration "http11.c", line 56: warning: syntax error: empty declaration "http11.c", line 57: warning: syntax error: empty declaration "http11.c", line 58:

..../lib/libxtra.a $LIBS" fi Solaris doesn't have xmalloc and friends available and so LIBS includes ../lib/libxtra.a. This causes all future invokations of the compiler to fail like so: configure:10955: /opt/SUNWspro/bin/cc -o conftest -fast -g -xs -v -xstrconst -xdepend -xtarget=ultra2 -xarch=v8plusa -xprefetch -fast -g -xs -v -xstrconst -xdepend -xtarget=ultra2 -xarch=v8plusa -xprefetch -D_XPG4_2 -D_XOPEN_SOURCE -D__EXTENSIONS__ -D_BSD_SOURCE -D_ISO9X_SOURCE -D_OSF_SOURCE -D_XOPEN_SOURCE_EXTENDED -fno-strict-aliasing -xildoff -xildoff -xildoff -xildoff conftest.c ../li...

Good Morning, I have a Sun E220R I am building as a replacement for an Ultra2. The OS is Solaris 2.7, samba version is 2.2.2. As a test box I named the E220R 'tiamat'. The older U2 is 'terra'. Tiamat had samba running happily on it. Last night I tested the switch over by using /usr/sbin/sys-unconfig on tiamat. This strips the system id, hostname, IP address...

Hi, for a specific application we need a low-profile SCSI card (PCI) with external 50pin connector. I thought about getting an "Adaptec SCSI Card 2930LP". However I was not able to find any usable information about wether this card is supported by Linux/CentOS 5.x or not. Does anyone have this card working with a CentOS 5.x machine? Alternatively: Are there any linux-supported

...into the left margin (to the left of the axis) as follows: > plot(0:10,0:10,pch="+") > text(c(1,0.5,0,-0.5,-1),1,"O") I see 5 "O" symbols at the expected position, two of which are left of the left axis. However, in version 0.64.0 for Solaris 2.5.1 on a Sparc/Ultra2, I only see three "O" symbols. Those that are to the left of the axis do not appear. Is this an expected result? I am using text() instead of mtext() because I want the labels to appear at Y co-ordinate positions as normal text, not rotated 90 deg. These are text labels rather than nu...

...5> rev 0x2 at pci 0000:00:13.0 irq 177 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18j Using cfq io scheduler Vendor: WDIGTL Model: WDE9180 ULTRA2 Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 sym0:0:0: tagged command queuing enabled, command queue depth 16. target0:0:0: Beginning Domain Validation sym0:0:0:ODD transfer in DATA IN phase. sym0:0:0:COMMAND FAILED (87 0 10). sym0:0: wide asynchronous. sym0:0:0...

Hi, I have a returning problem with one of my sparc Solaris machines. I have a Ultra2 with two 296MHz processors. All recent combinations of openssh/openssl have a not permanent problem. If i try to connect to the machine, i get sometimes these errors: # ssh root at simba RSA_public_decrypt failed: error:0407006A:rsa routines:RSA_padding_check_PKCS1_type_1:block type is not 01 key_...

cvs code from this morning (about 9am PST) breaks on slackware 7.1 w/ gcc 2.95.2.1 with an undefined reference to session_setup_sia in session.o. this seems to be the culprit here: #ifdef HAVE_OSF_SIA #else /* HAVE_OSF_SIA */ session_setup_sia(pw->pw_name, ttyname); since i have no idea what that's trying to accomplish (and seems to be a bit backwards to me from looking

Greetings, Can anyone relate experience(s) installing CentOS on Compaq rack mount servers units please? Easy no problem, easy some issues, or ghastly do not do it under any circumstances... ;) Basically, I'm looking at some used/refurb dual PIII units and will run RAID on Compaq built in SCSI or is it easy to pop in some 3ware SATA in them? Let me know in terms of CentOS 3 and/or 4 please.

...scsi0:A:1:0): data overrun detected in Data-in phase. Tag == 0x2. (scsi0:A:1:0): Have seen Data Phase. Length = 255. NumSGs = 1. sg[0] - Addr 0x03ace40 : Length 255 scsi scan: 255 byte inquiry failed with code 458752. Consider BLIST_INQUIRY_36 for this device Vendor: WDIGTL Model: WDE18300 ULTRA2 Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:1:0: Tagged Queuing enabled. Depth 4 SCSI device sdb: 35761710 512-byte hdwr sectors (18310 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 How d...

Hello, everyone! I set the samba running on my sun ultra2 with solaris2.6. Seem every thing works. I can share the directories and PC can share unix printer too. But the unix can not use PC's printer. when I try to directly use the command smbclient to print, I get following error. Antone can give me a hint? Thanks!! Feng Qiu server:Feng 33>cat f...

Hi, I am not sure I should be posting this to this list, so if it shouldn't have, please let me know where I should be posting it. Here is my configuration: - samba server is a Sun Ultra2 running Debian testing with kernel 2.4.21 and Samba 3.0.0 - samba client is a PC running Debian unstable with kernel 2.4.22 upgraded to 2.6.1 and SMB client 3.0.1 - Several PC acting as clients On the server, the directory I share belong to uid 1000 and gid 1000, but on the client, they should b...

does anyone know of a work-around for using a Dell Perc2/DC scsi controller with CentOS 4.4? thanks, Gerard.

...rom a perl script running on the host. The script brings up an ssh connection to the central admin machine and sets up some reverse port redirection for administration (telnet for instance) and some forward redirection for offsite real time logging. This is working fine except a Solaris 2.6 box (Ultra2) has started spontaneously rebooting. I put this down to hardware until today, when I was working on the machine through the redireted telnet port and accidently closed the ssh session from the host machine. This dropped my session of course, big deal I thought, but the host dropped to single use...

I have been trying various ways and looking though the lists, but I can't seem to find a solution. I am running a Ultra2 with Solaris 9 and rsync 2.5.2, with the old -move-files patch. I want to upgrade to 2.6.3 with the delete-sent-files patch. Which I understand is the new and improved version serving the same purpose. Unfortunately my patch under Solaris did'nt work, so I d/l the GNU version of Patch and...

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it would

...HESL-T chipset, with 2GB ECC Registered SDRAM. The RAID unit is a Promise UltraTrak100-TX8, with 8 Western Digital WD1200JB 120GB ATA100 7200rpm hard drives installed. 7 of the 8 drives are joined to a RAID5 array, the 8th is an unassigned hot spare. The UltraTrak's SCSI interface is an Ultra2-LVD (80MB/sec) interface, connected via its external 68-pin MicroD cable, to a custom Granite Digital internal-to-external "Gold TPO" ribbon cable - which leads to the "B" channel of the onboard AIC7899W Ultra160 SCSI interface. The RAID unit is the only SCSI device attache...

..., 0] lib/fault.c:(39) =============================================================== [2004/01/28 02:23:56, 0] lib/util.c:(1400) PANIC: internal error In case it matters, the build environment is Solaris 9 9/03 and Sun ONE Studio 8. My optimization flags were "-x03 -xarch=v8plusa -xchip=ultra2". I linked against openldap 2.1.22, mit-krb5 1.3.1, and cups 1.1.20 all from blastwave.com's pkg-get archive. The configure flags were: --with-pam --with-acl-support --with-ads --with-ldap --with-krb5=/opt/csw I attached to smbd with dbx in follow child on fork mode, and here's what...