Displaying 6 results from an estimated 6 matches for "uis_abl".
Did you mean:
uis_abler
2008 Sep 12
4
Megatec_USB on OpenBSD 4.3 - no input interrupt endpoint
...= 131624960 (125MB)
avail mem = 119201792 (113MB)
[...]
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11
[...]
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
[...]
uhidev0 at uhub0 port 1 configuration 1 interface 0 "UIS_ABLER USB to
Serial" rev 1.00/1.00 addr 2
uhidev0: no input interrupt endpoint
This is the output of usbdevs (sorry, we have no lsusb ;-)
root at puffwall# usbdevs -dv
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
VIA(0x1106), rev 1.00
uhub0
p...
2008 Sep 12
4
Megatec_USB on OpenBSD 4.3 - no input interrupt endpoint
...= 131624960 (125MB)
avail mem = 119201792 (113MB)
[...]
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11
[...]
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
[...]
uhidev0 at uhub0 port 1 configuration 1 interface 0 "UIS_ABLER USB to
Serial" rev 1.00/1.00 addr 2
uhidev0: no input interrupt endpoint
This is the output of usbdevs (sorry, we have no lsusb ;-)
root at puffwall# usbdevs -dv
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
VIA(0x1106), rev 1.00
uhub0
p...
2008 Oct 28
1
Megatec_USB on OpenBSD 4.3 - again...
...ous help from Henning Brauer, I managed to solve
an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB).
Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the
kernel, adding a USB_quirk, this is what I get when I insert the USB
cable:
ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2
So far, so good (Henning confirmed this).
Trouble is, when I run megatec_usb:
root at puffwall:~/nut-2.2.2 # drivers/megatec_usb -u _ups -a atlantisland
-DDDDDD Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14
[megatec_usb]
Carlos Rodrigues (c)...
2006 Feb 10
1
newhidups capture - Atlantis-Land HID UPS
Hello Charles!
As promised, I just checked out the CVS and recompiled everything. In
the attached .txt is what is coming out from my UPS. I am wondering
about all those zeroes.
Also, this morning I plan to connect the UPS to a Win box running the
monitoring program supplied with the UPS (UPSilon2000) and a USB sniffer
program. If you have any suggestions on what to look for in the data,
2005 Dec 07
5
Atlantis-Land UPS with Cypress CY7C63723 chip (cypress_m8 driver) support
Hello everybody!
I am trying to get an Atlantis-Land OnePower Line Interactive S1501
UPS (actually it is made by Ablerex) to talt to my Linux box through its
USB port (no more RS-232...), either using the supplied program
(UPSilon2000, works under Win and Linux) or whatever else.
The UPSilon2000 program apparently works OK *if* it can talk to the
UPS via a serial port; since my UPS has
2005 Dec 07
5
Atlantis-Land UPS with Cypress CY7C63723 chip (cypress_m8 driver) support
Hello everybody!
I am trying to get an Atlantis-Land OnePower Line Interactive S1501
UPS (actually it is made by Ablerex) to talt to my Linux box through its
USB port (no more RS-232...), either using the supplied program
(UPSilon2000, works under Win and Linux) or whatever else.
The UPSilon2000 program apparently works OK *if* it can talk to the
UPS via a serial port; since my UPS has