Displaying 20 results from an estimated 32 matches for "udma2".
Did you mean:
udma
2004 Dec 09
1
EDD error RE: Re: SYSLINUX 2.12-pre7 released
...-ROM is going to look like to the program, is
>that it looks like an additional hard disk which a very high drive
>number (typically 9Fh or so); MS-DOS will normally ignore this since it
>asks the BIOS how many drives there are and ignores the rest.
>Does the error message come from UDMA2.SYS or...?
> -hpa
yes, it comes from UDMA2.SYS, it does a series of initialisation tests (read spead for example, and VDS).
I don't know behaviour when booting to MSDOS on harddisk, only Isolinux --> A: and Isolinux --> Memdisk --> Disk image
Bernd
http://fdos.org/ripcord/beta9...
2004 Dec 09
1
EDD error RE: Re: SYSLINUX 2.12-pre7 released
...I can't spread/provide that disk image.
I'll manage, though. It's just making my testing a tiny bit more difficult (hit ESC each time the machine boots, then select floppy, instead of let isolinux boot and then select 'A' for localboot 0x80 as defined in my isolinux.cfg file)
UDMA2 author mailed this:
------------
and avoids addressing over 20 bits. Re: the "Int 13h" function codes used
by UDMA2, they are (A) 41h to see if an EDD BIOS is present, 48h to request
EDD parameters for every disk and 08h to request CHS values for every disk.
All are "basic" fu...
2013 Dec 10
1
Multiple errors after upgrade to 10.0-PRERELEASE
...Shop kernel: ata1: FAILURE - zero length DMA transfer attempted
Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed
cat /var/log/messages | grep ata1:
cd0 at ata1 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp DVD-ROM TS-H352C DE02> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata1 bus 0 scbus3 target 1 lun 0
cd1: <PHILIPS DVD+-RW DVD8701 5D24> Removable CD-ROM SCSI-0 device
cd1: Serial Number MY0P92257015956T02SA
cd1: 33.300MB/s transfers (U...
2004 Dec 10
1
EDD error RE: Re: SYSLINUX 2.12-pre7 released
>information a bit closer; it'd find that it's marked accordingly.
UDMA2.SYS author now worked around it, it seems you do something with "DPTE" in isolinux.asm but not using it (probably for memdisk or direct floppy/harddisk emulation?).
also something about EDD v1.1 and v3.0 specifications and setting bits to 1.
Anyway, the driver works now on:
BIOS -> cd...
2002 Dec 07
6
kjournald using up majority cpu%.
We run several RH7.2/7.3 servers & recently 2 of them, although still
working fine, have started to show kjournald as generally using over 50%
cpu% on 'top' - virtually continuously. Free cpu% generally less than 25%
now!
Both machines are also using software RAID5 EIDE ....... otherwise are
standard server installs.
Any info on what kjournald is & why it should have recently
2003 May 06
1
Slow disk access on Dell Latitute with ATA/ATAPI-5 T13 1321D
...nd it would seem
that my disk access is extremely slow. I have the latest updated kernel
from RedHat 8.0 kernel 2.4.18-27.8.0. Somehow I think it is related to
the UDMA stuff (shows my level of understanding). I have run hdparm and
although I think I should at least udma level 5, I have at most udma2
listed. Is this a kernel option/update problem?
The first question is whether my disk is really not optimum.
Any help or help would be appreciated Or if you need more info just ask.
ned blurock
Here is some less vague info:
----------------------------------------------------------------
hdp...
2003 Feb 03
10
On very different journalling activity on 2 servers.
Hello Folks,
We have 2 (identical hardware) busy public 2U rack servers, both have
several hundred users & peak email (for example) deliveries at 300/5min
during the daytime.
Both servers run RAID1 over 2 EIDE disk drives.
One server is fine - it never has problems - it is running RH7.3 and CPU
loads are normal.
The other server has constant disk activity & kjournald at CPU load of
2004 Dec 08
1
EDD error RE: Re: SYSLINUX 2.12-pre7 released
...solinux
(with either loading an image directly through MEMDISK, or booting to A:), and not when using a bootdisk directly or booting a bootdisk directly which has SYSLINUX on it.
configuration:
bootable cdrom with Isolinux 2.11/2.12pre9 as bootloader.
1.44MB bootdisk with MSDOS.SYS/IO.SYS and the UDMA2 dos driver,
http://fdos.org/ripcord/beta9sr1/other/misc/Udma2_16.zip (sourcecode included)
DEVICE=UDMA2.SYS
SHELL=A:\COMMAND.COM A:\ /D /P
Doesn't Isolinux clear everything before a localboot 0x00 ?
I guess not, as sometimes the eltorito.sys driver from www.nu2.nu also still loads, which mean...
2008 Nov 21
3
hda: no DRQ after issuing WRITE
...CCbytes=4
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown:
* signifies the current active mode
So from recommendation on website I did this to match MaxMultiSect:
hdparm -m16 /dev/hda
then tried this to turn MultSect off:
hdparm -m0 /dev/hda
Still getting error. The Supermicro MBD-X7SBL...
2003 Mar 14
4
Am I getting the best performance?
...e size with M = 1024*1024: 27199 MBytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 512.0kB Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd...
2002 Oct 03
1
kjournald tuning
...e=0, ECCbytes=34
BuffType=DualPortCache, BuffSize=1961kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=40088160
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no
Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
4:15pm up 14 days, 23:58, 2 users, load average: 10.72, 7.41, 6.20
vmstat 5
procs memory...
2012 Feb 20
4
Really bad KVM disk performance
...BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=73400320
IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no
Drive conforms to: ATA/ATAPI-5 published, ANSI NCITS 340-2000:
* signifies the current active mode
The bonnie numbers show for sequential output:
Good Machine Host: 76,857K/Sec
My Machine Host: 72,561K/Sec
Good Machine Centos 5.7 Guest: 66,266K/sec
My Machine...
2004 Dec 29
2
SYSLINUX 3.00-pre9 released
I have just released SYSLINUX 3.00-pre9. The only change versus
3.00-pre8 is that the MEMDISK query API now reports the boot loader ID
byte, per Bernd's suggestion.
This is a release candidate, and I plan to release it as 3.00
*tomorrow*, unless I hear back anything bad.
-hpa
2004 Sep 30
0
Asterisk server suddenly fronzen after many zapter errors
...en (not only asterisk) and the
only way to recover is a full reboot.
Not sure how or if this is related to the new harddisk settings but we
made the changes last friday and this (seriuos) problem happened tuesday
and thursday (today) this week.
The settings we have now in our harddisks is using udma2 with the
following settings as show with hdparm:
dev/hda:
multcount = 16 (on)
IO_support = 3 (32-bit w/sync)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 4865/255/63, sectors = 78165360, start =...
2003 Apr 04
0
How does UDMA mode get set?
...fa0-0xffaf at device 31.1
on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=50 stat1=10
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
...
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <Maxtor 4D040H2/DAH017K0> ATA-6 disk at ata0-master
ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
My question is, why did the kerne...
2009 Nov 17
2
Workaround for RH #502499?
...BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
* signifies the current active mode
Any suggestions welcomed.
Thanks!
--Chris
2010 Jan 03
1
Setting CDROM parms
My apologies in advance for asking such an elementary question. I
called myself searching the Installation Guide and Deployment Guide,
with no success.
The situation is that I bought a Lite-On ATAPI iHAP122 that will not
burn DVDs unless I use hdparm to turn dma off. I bought that drive
because it was a rare beige drive. Until I can find a decent DVD burner
and/or get a Windows machine put
2003 Oct 26
1
Quantum IDE HDD DMA issue.
...e=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=66055248
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : Reserved : Reserved : Reserved : ATA/ATAPI-6 T13 1410D
revision 1 : Reserved : Reserved : Reserved : ATA-2 ATA-3 ATA-4 ATA-5
ATA-6
-----------------
The initial problem I encountered with the drive is the I was able to
see only...
2003 Jun 25
0
Bug in ext3=journal ?
...=40
BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=20044080
IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4
/sbin/lspci=
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 02)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge:...
2013 Feb 01
1
stable/9: Force ada1 to UDMA-33
Hello,
I've got a (P)ATA disk in a special frame. The disk itself
supports UDMA-100 (and has an 80-ribbon cable), but the
frame isn't compatible with that. By default, FreeBSD
negotiates UDMA-100, and the console starts to fill with
ICRC errors.
In the past, I used a patch to ata-all.c that enabled the
following entry in loader.conf to force the disk to UDMA-33,
so it worked fine: