Displaying 7 results from an estimated 7 matches for "udev_dir".
2009 Sep 17
1
multipath using defaults rather than multipath.conf contents for some devices (?) - why ?
...uniform
no_path_retry 18
rr_min_io 100
path_checker tur
}
- but our actual multipathing as shown by multipath -ll , and multipath -ll -v 3 looks as though for the
HSV400 it is using the defaults rather than these settings. The defaults are
#defaults {
# udev_dir /dev
# polling_interval 10
# selector "round-robin 0"
# path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
# prio_callout /bin/true
# path_checker...
2006 Apr 13
1
device-mapper multipath
...rgets:
# ls /dev/sd*
/dev/sda /dev/sda2 /dev/sda5 /dev/sdb /dev/sdb2 /dev/sdb5
/dev/sda1 /dev/sda3 /dev/sda6 /dev/sdb1 /dev/sdb3 /dev/sdb6
=====================================================
The multipath.conf is as follows:
defaults {
multipath_tool "/sbin/multipath -v0"
udev_dir /dev
polling_interval 10
default_selector "round-robin 0"
default_path_grouping_policy multibus
default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
default_prio_callout "/bin/true"
default_features "0"
rr_wmin_io 100
failback immediate
}
devno...
2010 Apr 13
1
DAHDI-Linux and DAHDI-Tools 2.3.0 Released
...most significant changes from the 2.2.0
release are:
General DAHDI Changes:
* Static /dev/dahdi files are not generated at install time since udev is used
on all the supported distributions. build_tools/make_static_devs is
available for those users who still need the static device files.
* UDEV_DIR can be set during build in order to override where the build will
place the udev rules.
* dahdi_dummy is no longer built by default. DAHDI will automatically use a
kernel timer to provide timing if there isn't a physical span which is
providing timing.
* Added support for 16 kbps softw...
2010 Apr 13
1
DAHDI-Linux and DAHDI-Tools 2.3.0 Released
...most significant changes from the 2.2.0
release are:
General DAHDI Changes:
* Static /dev/dahdi files are not generated at install time since udev is used
on all the supported distributions. build_tools/make_static_devs is
available for those users who still need the static device files.
* UDEV_DIR can be set during build in order to override where the build will
place the udev rules.
* dahdi_dummy is no longer built by default. DAHDI will automatically use a
kernel timer to provide timing if there isn't a physical span which is
providing timing.
* Added support for 16 kbps softw...
2009 Sep 27
0
SUMMARY : multipath using defaults rather than multipath.conf contents for some devices (?) - why ?
...uniform
no_path_retry 18
rr_min_io 100
path_checker tur
}
- but our actual multipathing as shown by multipath -ll , and multipath -ll -v 3 looks as though for the
HSV400 it is using the defaults rather than these settings. The defaults are
#defaults {
# udev_dir /dev
# polling_interval 10
# selector "round-robin 0"
# path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
# prio_callout /bin/true
# path_checker...
2008 Apr 05
0
BUG(?): multipathd confusion leads to kernel panic in Xen 3.2.1-rc2
...tall scsi-target-utils ; /etc/init.d/tgtd start''. The config on the
initiator needed to reproduce this is default to the best of my
recollection. Xen was compiled with ''make world XEN_TARGET_X86_PAE=y
vmxassist=n''. /etc/multipath.conf is as follows:
defaults {
udev_dir /dev
polling_interval 2
selector "round-robin 0"
path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
prio_callout /bin/true
path_checker...
2008 Jun 25
6
dm-multipath use
Are folks in the Centos community succesfully using device-mapper-multipath?
I am looking to deploy it for error handling on our iSCSI setup but there
seems to be little traffic about this package on the Centos forums, as far
as I can tell, and there seems to be a number of small issues based on my
reading the dm-multipath developer lists and related resources.
-geoff
Geoff Galitz
Blankenheim