search for: txz

Hello Everyone, Good morning/afternoon/evening. Is there any chance to have SAMBA 48 working with Python36 and its derivatives? ( py36-dnspython-1.15.0.txz. py36-iso8601-0.1.11.txz, py36-ply-3.11.txz, py36-setuptools-40.6.2.txz) Currently SAMBA 48 requires python 26, but that is conflicting with existing packages in the server that is using py36. Any way to work around that issue? Thanks Much! Fabricio.

Hello :-) I want to test new "pkg" tool, but it complains that there is no repo.txz file on the repository: # pkg install libreoffice Updating repository catalogue pkg: ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9-stable/All//repo.txz: File unavailable (e.g., file not found, no access) I have set PACKAGESITE to packages-9-stable repository :-) Will this support s...

Hi, poudriere 2.2 here, running on 9.1-amd64 Of the 730-ish ports, whenever I run a build, it always rebuilds the above two ports. Even if nothing changed. Is there are specific reason for this? I don't really mind nginx, because it builds so quickly - but GraphicsMagick takes a bit too long.

Hi, all, I just wanted to report that. I do not yet have a patch to suggest. nanobsd.sh cust_pkg() still tries to call pkg_add and fails when adding packages to the NANO_WORLD_DIR. tbz vs. txz ? Kind regards Patrick -- punkt.de GmbH * Kaiserallee 13a * 76133 Karlsruhe Tel. 0721 9109 0 * Fax 0721 9109 100 info at punkt.de http://www.punkt.de Gf: J?rgen Egeling AG Mannheim 108285 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.a...

...endencies Python27 vs python36 On Wed, 2019-04-03 at 15:37 -0300, Suporte - KONTROL via samba wrote: > Hello Everyone, > > Good morning/afternoon/evening. > > > > Is there any chance to have SAMBA 48 working with Python36 and its > derivatives? ( py36-dnspython-1.15.0.txz. py36-iso8601-0.1.11.txz, > py36-ply-3.11.txz, py36-setuptools-40.6.2.txz) > > Currently SAMBA 48 requires python 26, but that is conflicting with > existing packages in the server that is using py36. No, you need to upgrade to Samba 4.10 to get Python 3.x support. > Any way to...

...f you wish to revert to an earlier calibre release or download a calibre upgrade manually, download the tarball of that release from here (choose the 32-bit or 64-bit version, as appropriate). Assuming you want calibre in /opt/calibre, run the following command, changing the path to calibre-tarball.txz below as appropriate: sudo mkdir -p /opt/calibre && sudo rm -rf /opt/calibre/* && sudo tar xvf /path/to/downloaded/calibre-tarball.txz -C /opt/calibre && sudo /opt/calibre/calibre_postinstall HTH. -- *** e-Mail is NOT a SECURE channel *** Do...

...function(alpha) {z <- qnorm(alpha/2); c(z,-z)} # A transformation function - it can take a vector as # its z argument Tzx <- function(z, sigma_p, mu_p) sigma_p*z + mu_p # Another transformation function similar to the # previous one - it can take a vector as its x argument Txz <- function(x, sigma_p, mu_p) (x - mu_p)/sigma_p # The general function with several arguments BetaG <- function(mu, alpha, n, sigma, mu_0) { lasZ <- zetas(alpha) # It is a vector sigma_M <- sigma/sqrt(n) lasX <- Tzx(lasZ, sigma_M, mu_0) # Another vector(transf....

...ovision my AD/DC -- I did not do a separate download from either Samba.org or Slackbuilds -- and, unlike Ubuntu and Debian (from the same era), it worked out-of-the box. I've been updating Samba quarterly since then. Also, I do find samba on the 14.2 DVD in slackware64/n/samba-4.4.4-x86_64-3.txz. See PACKAGES.TXT at the root of the same DVD. In this email, I've removed all the testing and discussion bits from this thread, but I'll insert my final questions from the previous message in case you have some theories or can otherwise correct my misconceptions: Some unanswered questio...

On Fri, 27 Jan 2017 14:37:33 +0000 Rowland Penny wrote: > > Also, I do find samba on the 14.2 DVD in > > slackware64/n/samba-4.4.4-x86_64-3.txz. See PACKAGES.TXT at the root > > of the same DVD. > > See, you knew where to look (I was looking for a dir that started with > 's'), however the .txz file does contain a 'doinstall.sh' file. Well, that ends up being a bit obscure for me. I don't normally look f...

...to an earlier calibre release or download a > calibre upgrade manually, download the tarball of that release from > here (choose the 32-bit or 64-bit version, as appropriate). Assuming > you want calibre in /opt/calibre, run the following command, changing > the path to calibre-tarball.txz below as appropriate: > > sudo mkdir -p /opt/calibre && sudo rm -rf /opt/calibre/* && sudo > tar xvf /path/to/downloaded/calibre-tarball.txz -C /opt/calibre && > sudo /opt/calibre/calibre_postinstall > > HTH. James: Thanks for the detailed post. On...

...ke a snapshot. I then deduplicate with bedup dedup <disk-mount-point> What I am finding is that it is reporting a deduplication between the data on the disk and its snapshot e.g.: Deduplicated: - u'/mnt/floppy/_home/ftp/pub/Linux/Slackware/slackware-current/slackware/t/tetex-3.0-i486-7.txz' - u'/mnt/floppy/snapshots/_home_20131205T15:02:33/ftp/pub/Linux/Slackware/slackware32-13.37/slackware/t/tetex-3.0-i486-7.txz' (don't worry, I promise it is an external usb drive and not a floppy!) However, I thought that would not be necessary as one would merely be a snapshot of...

Due to trip to make, I will have to wait few days to upgrade my nodes to 9.2 release. But, I'd like to learn the easiest way to handle ports. Thanks to Matthew Seaman, I will try out txz repos, when I find the correct address for that. Otherwise, I assume portmaster might do the job equally well. Reading manual, I guess flags like -P -a or -PP -a are made to fit? Next to think would be to recompile some ports on lap- top, having intel 3000 graphics. I did it with kms lines in make....

...do a separate download from either Samba.org or > Slackbuilds -- and, unlike Ubuntu and Debian (from the same era), it > worked out-of-the box. I've been updating Samba quarterly since > then. > > Also, I do find samba on the 14.2 DVD in > slackware64/n/samba-4.4.4-x86_64-3.txz. See PACKAGES.TXT at the root > of the same DVD. See, you knew where to look (I was looking for a dir that started with 's'), however the .txz file does contain a 'doinstall.sh' file. > > > In this email, I've removed all the testing and discussion bits from >...

Am Mi., 18. Nov. 2020 um 12:17 Uhr schrieb David Chisnall <David.Chisnall at cl.cam.ac.uk>: > On 18/11/2020 18:03, Michael Kruse wrote: > > This is missing the probably largest group: Users of clang who compile > > clang themselves (e.g. because their OS does not come with a package > > for clang, or is too old) > > I think our target for this group should be that

...otable flag of a partition - part-get-mbr-id - get the MBR type byte of a partition - part-set-mbr-id - set the MBR type byte of a partition - pvresize-size - resize a physical volume (with size) - pwrite - write to part of a file - resize2fs-size - resize an ext2/3/4 filesystem (with size) - txz-in - unpack compressed tarball to directory (RHBZ#580556) - txz-out - pack directory into compressed tarball (RHBZ#580556) - vfs-label - get the filesystem label - vfs-uuid - get the filesystem UUID - vgscan - rescan for LVM physical volumes, volume groups and logical volumes - write - create...

...zilla.redhat.com/show_bug.cgi?id=847880 https://bugzilla.redhat.com/show_bug.cgi?id=847881 This patch series adds various optional arguments to the tar-in and tar-out commands. Firstly (1/7) an optional "compress" flag is added to select compression. This makes the calls tgz-in/tgz-out/txz-in/txz-out deprecated, and expands the range of compression types available. Secondly (2/7) we add an optional numericowner boolean to tar-out, which generates numeric UIDs/GIDs in the resulting tar file. The remaining patches allow us to encode the '--exclude=PATTERN' argument to tar. W...

I am doing a buildworld with clang on amd64 9.1-PRERELEASE #2 r242867. In /etc/src.conf I have "WITHOUT_GCC= yes". Compile progresses up to below then breaks: ===> usr.bin/xlint/xlint (all) ===> usr.bin/xlint/llib (all) lint -cghapbx -Cposix /asp/src/usr.bin/xlint/llib/llib-lposix lint -cghapbx -Cstdc /asp/src/usr.bin/xlint/llib/llib-lstdc ===> lib/clang/libllvmx86codegen (all)

...as/files/FreeNAS-8.2.0/RC1/ Release Notes for FreeNAS 8.2.0-RC1 are attached. -- Thanks, Josh Paetzel Director of IT, iXsystems Servers For Open Source http://www.ixsystems.com Release Notes for FreeNAS 8.2.0-RC1 *** IMPORTANT *** - The GUI upgrade format changed in 8.2.0-BETA3 from xz to txz. What this means is that if you are attempting to do a GUI upgrade to 8.2.0-BETA4 from 8.2.0-BETA3 use the .txz version of the GUI_Upgrade file. If you are upgrading from any previous version use the .xz file. - The image size increased in 8.0.1-BETA3. The new size requires a 2 GB stora...

...odes the install location. Deb packages are just ar archives, RPMs are just cpio archives, so users without admin access could just grab the latest nightly package for their distro and extract it into their home directory. We could provide a script for that (or, to be more friendly, build a .txz from the same directory tree). > Second, for OpenMP target offloading, we recommend users to compile > the latest trunk because it is under heavy development. In practice, > if you are using target offloading, you have to compile it yourself > because it needs to match the installed ve...

...48;5;232;38;5;11:cd=48;5;232;38;5;3:or=48;5;232;38;5;9:mi=05;48;5;232;38;5;15:su=48;5;196;38;5;15:sg=48;5;11;38;5;16:ca=48;5;196;38;5;226:tw=48;5;10;38;5;16:ow=48;5;10;38;5;21:st=48;5;21;38;5;15:ex=38;5;34:*.tar=38;5;9:*.tgz=38;5;9:*.arj=38;5;9:*.taz=38;5;9:*.lzh=38;5;9:*.lzma=38;5;9:*.tlz=38;5;9:*.txz=38;5;9:*.zip=38;5;9:*.z=38;5;9:*.Z=38;5;9:*.dz=38;5;9:*.gz=38;5;9:*.lz=38;5;9:*.xz=38;5;9:*.bz2=38;5;9:*.tbz=38;5;9:*.tbz2=38;5;9:*.bz=38;5;9:*.tz=38;5;9:*.deb=38;5;9:*.rpm=38;5;9:*.jar=38;5;9:*.rar=38;5;9:*.ace=38;5;9:*.zoo=38;5;9:*.cpio=38;5;9:*.7z=38;5;9:*.rz=38;5;9:*.jpg=38;5;13:*.jpeg=38;5;13:...