search for: tx4

Greetings, I am running Xen-3.0.2-3, with host OS kernel version 2.6.16.13-xen0. The system is a AMD Athlon XP running Debian/Etch. I have 3 SATA disks plugged into a Promise TX4 SATA controller. The disks are RAIDed using Linux md with LVM wrapped around the md''s for volume management. I currently am running 3 domUs, each with LVM backed vbd''s. This server has been up for nearly a month. I am getting these types of kernel messages: ata4: status=0x50...

Hi, i'm looking to update some SRV DNS Record , but i didn't find the correct syntax to handle priority, weight and port. The goal is to higher the priority of one of my different DCs. Thanks for your help Alain

...under NDA) and hardware for > testing. This commit is the first result of the cooperation, and > adds support for several of their new controllers that we didn't > support before (and probably newer would have without this arrangement). > > Add support for the Promise SATA150 TX2/TX4 and the Promise TX4000 > controllers. This also adds support for various motherboard fitted > Promise SATA/ATA chips. > Note that this code uses memory mapped registers to minimize overhead. > I belive FreeBSD has made another first in the Open Source world > by being able to release...

Hi all, Somehow I managed to mess with a RAID array containing an ext3 partition. Parenthesis, if it matters: I disconnected physically a drive while the array was online. Next thing, I lost the right order of the drives in the array. While trying to re-create it, I overwrote the raid superblocks. Luckily, the array was RAID5 degraded, so whenever I re-created it, it didn't go into sync;

Hi, One of my shared volumes crashed the other day on a RH-7.2, 2.4.9-31 system. These are the first errors in the log: kernel: EXT3-fs error (device ide0(3,9)): ext3_readdir: bad entry in directory #2424833: rec_len is smaller than minimal - offset=0, inode=2553887680, rec_len=0, name_len=0 kernel: EXT3-fs error (device ide0(3,9)): ext3_readdir: bad entry in directory #2424833: rec_len is

Hi List I have a Promise SATA 300 TX ( NOT raid ) that do have RHEL4 driver, but this driver doesn?t work with CentOS4 Why? What can I do to get a driver that works? SATAII150/SATA300 TX series RHEL4 32-bit Driver http://www.promise.com/support/download/download2_eng.asp?productID=139&cate gory=all&os=100# This one should be for the correct 2.6 kernel, but it's

...ng on my BIOS settings. Always after verifying dependencies, and typically during the disk format process, the installation freezes. I get a "kernel panic - not syncing" in text mode. Single disks, dual disks, LVM, no-LVM, software RAID, even when disks are on a Promise SATA300-TX4. The single-core Celeron processors work fine, but none of the dual core processors work. I'm using 5 sets of hardware, so bad hardware is unlikely. I'm stumped. Anyone out there with similar problems and/or workarounds? Any ideas? -Ken

Hi List I have a problem with 2 drivers 1. Intel 1000 GT dosen't work correctly 2 Promise SATA 300 TX2 plus/TX4 dosen't work This is not a RAID card, just an S-ata controller for a new s-ata Hitachi 500 Gb drive I have tried CentOS-4.1 kernel, but sadly nothing Any clues anyone? Cheers Jan Erik

hi! $ dovecot --exec-mail ext /usr/lib/dovecot/expire-tool.sh /usr/lib/dovecot/expire-tool.sh: 9: Bad substitution What's the problem, do I miss something? This is the first time, I trying to use expire. This is an Ubuntu 10.04 . Thank you, tamas

Hello fellow listers... I'd like to get some recommendations on a good SATA controller for use with CentOS 5.x. It should be PCI, bootable, have 4 SATA ports, have native support (no crap proprietary or manually compiled drivers), and possibly hot swap support. Any ideas? There are plenty of PCI-X and PCIe controllers that I think would work but the use for this card is in a smaller 1U

I've been burned by Sata not working on an Asus motherboard (nVidia / nForce) and need to select something that will work for a fairly light duty web/mail/sql server. How do I go about finding out if a specific motherboard will work with sata software raid and Centos 4.4 (or 5.x when it's settled down). Cheers; Alex V. -- This message has been scanned for viruses and dangerous

Has anyone ever triend to hang a eSATA drive chasis off oc a centos box? Not specifically this box, but something like this.... http://www.compsource.com/ttechnote.asp?part_no=DS1220&src=F I have used internal SATA drives on 3ware cards before without an issue. Didn't know if this was in the same arena. Thanks! Andrew

...ot;euclidean") Any help would be greatly appreciated! An example of one of my data sets.... > str(hemat) 'data.frame': 87 obs. of 14 variables: $ ID : Factor w/ 29 levels "G-BB","G-BW",..: 1 1 1 2 2 2 3 3 3 4 ... $ Time : Factor w/ 3 levels "Tx4","Tx5","Tx6": 1 2 3 1 2 3 1 2 3 1 ... $ Treatment: Factor w/ 2 levels "Control","Experimental": 1 1 1 2 2 2 1 1 1 1 ... $ SEX : Factor w/ 2 levels "Female","Male": 2 2 2 2 2 2 1 1 1 2 ... $ PCV : int 45 33 38 50 49 53 45...

Hi, yesterday I upgraded my kernel to 2.4.15-pre6 (after months of using only ac-kernels) and had my first ext3-error since 0.0.3 . syslog tells me : Nov 20 18:16:31 enterprise kernel: EXT3-fs error (device ide0(3,9)): ext3_readdir: bad entry in directory #47390: inode out of bounds - offset=0, inode=404363549, rec_len=4096, name_len=23 and the system remounted /usr to ro. I don't have

just noticed the following problem.. after running samba 302rc1(as pdc) for a few day's. old SMBD pid's are left in the procces tree.. eating memory and cpu time, causing linux to overload and not function annymore. after stopping samba, the smbd pid's will stay. stopping samba the 2nd time will do the trick, they finaly disapear... so you have to stop samba twice.. ?? don't

Hello, I'm looking for a recomendation for a SATA controlers. In the range of 4-8 ports, either PCI or PCIe (for desktop use) and/or PCI-X, PCIe (for server use). I'd especially like it if the Linux driver was already in CentOS or easily added. Everytime I find something interesting, a google search shows up either the drivers is for 2.6.30 (ie, not CentOS), someone tried it and it was

Greetings all- I need to purchase a PCIe SATA or SAS controller(non-raid) for a Supermicro 2U system. It should be directly bootable. Any recommendations? The system will be running CentOS 5.4 as an LTSP system. Thanks! --Tim

Hi, I started creating a small class but I'm courious about how it is working. To create a instance of my class "Partri" I write this at Rgui: x <- new("Partri", name="Gilvan") and to change the slot "name" of this instance, I write: setName(x, newname="Justino") It is not working, because when I type "x" at Rgui, it shows

I want to import my zpool''s from FreeBSD 8.0 in OpenSolaris 2009.06. After reading the few posts (links below) I was able to find on the subject, it seems like it there is a differences between FreeBSD and Solaris. FreeBSD operates on directly on the disk and Solaris creates a partion and uses that... is that right? Is it impossible for OpenSolaris to use zpool''s from FreeBSD?

Hello. I would like to know if promise RAID cards are compatible with CentOS / RHEL ? I have seen that only SATA is supported on the RHEL hardware compatibility list. The other ATA raid cards seems not to be compatible. They give source code and promise grants compatibility with RedHat 8 and 9 but not RHEL. I would like to know if somebody tried a ATA raid card like Fasttrack TX2000, SX4000,