search for: turnned

I beat my head against a wall for almost 2 hours with this issue. My first problem was easily solved. I wanted a class that could use ActiveRecord''s validation capabilities but without using a table behind it (I would be persisting setup information in the session, but the initial setup parameters come from a user input form) No problem...found this link which got me up and running

Right now llvm-gcc generates exception handling intrinsics, but actual eh codegen (--enable-eh) is turned off. On x86-linux, turning it on generates no new failures in the testsuite, so how about turning it on? The problem is likely to be PPC which claims to support eh but doesn't support it completely yet AFAIK. I suggest setting SupportsExceptionHandling to false for PPC until it is

I can't login anymore... used to be able to. Timing doesn't seem to be working well any ideas? Also what is this "NOTICE" I'm getting? *CLI> == Accepting call on 'SIP/lenny-b19c' ("Lenny Tropiano" <5555>) -- Executing VoiceMailMain("SIP/lenny-b19c", "") in new stack == Parsing

I am running debian unstable. I applied the ext3 patch to the 2.4.9 kernel source, and got ext3 working fine. However, when I shut my system down (shutdown -h now or shutdown from kdm), it does not turn the power off. The whole shutdown sequence runs, and finally displays the message "Power Down", but nothing else happens. At this point, the power switch does not turn off the

Second iteration of my endeavour to rid nouveau, radeon and amdgpu of runtime pm ref leaks. Patches 1 to 8 are identical to v1. Patch 9 of v1 modified the DRM core to turn off all CRTCs on driver unload. Based on feedback by Daniel Vetter, I've replaced this with a helper to turn off all CRTCs, which is called by nouveau, radeon and amdgpu on unload. In other words, this is now opt-in. So

Hello, we have a problem using APC Back-UPS CS 500 (connected via USB, usbhid-ups-apc) and UPS-NUT. We've tried different Versions of UPS-NUT (2.2.1 and 2.2.2), including the latest from SVN (28th November 2008). We've also tried apcupsd, which works fine for our requirements, but we don't want use it. What we need is simple: The UPS should turn off after power loss and shutdown

I have a brand new Eaton 5E UPS purchased in Australia. Details: Eaton 5E Model: 5E650iUSB-AU Date: best I can find is the shipping date to supplier on box label - May 2014 OS: Ubuntu 14.04 Server edition Nut 2.7.1 Installed via apt-get install nut I have two problems I would like to fix. First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can

On Sun, Nov 27, 2016 at 4:13 AM, Lukas Wunner <lukas at wunner.de> wrote: > On Sat, Nov 26, 2016 at 06:09:34AM +0000, Evan Foss wrote: >> I did some other bug reports here a while back. I am back again >> because I updated my kernel from 3.19.1 to linux-4.8.10-gentoo (if you >> want I can test the mainline too). On boot all my GPU's turn on. If I >> turn them

On Jul 26, 2014, at 9:58 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can mute the beeper temporarily (and this works) but that most UPSs do not allow you to permanently turn it off (I tried using upsrw but it said beeper.status was read only). Can you send the variable list

Folks I have a laptop which i am using temporarily as a test server. It is permanently plugged in. It is running Centos 6, command line only. In the past, I could close the lid, thereby turning off the display, but not turning off the machine. It remained running indefinitely. A recent update (this past week) changed that behavior. Now, when I close the lid, the laptop turns itself off

> >> I see at http://networkupstools.org/ddl/Cyber_Power_Systems/Value_800E.html that >> the Value 800E does not have variables such as >> load.off.delay - Turn off the load with a delay (seconds) >> load.on.delay - Turn on the load with a delay (seconds) >> >> What does command ? upscmd -l <UPS> ? report? > > I'll try this tonight when

Hi Folks, I did some other bug reports here a while back. I am back again because I updated my kernel from 3.19.1 to linux-4.8.10-gentoo (if you want I can test the mainline too). On boot all my GPU's turn on. If I turn them off via echo "OFF"> /sys/kernel/debug/vgaswitcheroo/switch I can't turn them back on. They also do not turn on if I try to change GPU's. Trying to

If I turn on one of the llvm interprocedural optimizations without turning on the analysis it uses. will the analysis be turned on automatically ? Thanks Xin

Hello, It seems to me that LLVM is merging/in-lining the tail function to its caller. I am wondering if there is a flag that I can use to turn off this optimization? Thanks! Wei

I want to connect each llvm ir for example: 1. Turn C/C++ language into C_llvmIR assembly language using Clang 2. Turn Fortran language into Fortran_llvmIR assembly language using Dragonegg 3. Turn Python language into Python_llvmIR assembly language using Unladen-Swallow 4. Connect each llvm IR Is this possible? Wonjun, Choi -------------- next part -------------- An HTML attachment was

> When a UPS unit performs a delayed power off (NUT sets the delay to 20 seconds > by default) it deconnects its power outlets which in some UPS units produces an > audible "clunk". The display of lights on the front panel changes, and the > beeping stops. The delayed power off can be demonstrated with a light bulb or a > mains circuit tester connected to one of the

Hi Wei, > It seems to me that LLVM is merging/in-lining the tail function to its > caller. > I am wondering if there is a flag that I can use to turn off this > optimization? do you want to turn off all inlining, or only inlining of calls that are tail calls? Why do you want to turn it off? Ciao, Duncan.

https://bugs.freedesktop.org/show_bug.cgi?id=104698 --- Comment #4 from Valdas <zmogas at hotmail.com> --- I reproduced xorg crash (as in description) again. I think key is that secondary monitor was turned off (power save mode like: cable connected but power button blinking) during boot up. Then I turned off primary display (crash), then logged in and turned on primary display (crash),

On Fri, 24 Aug 2007, Duncan Sands wrote: > Right now llvm-gcc generates exception handling intrinsics, > but actual eh codegen (--enable-eh) is turned off. On > x86-linux, turning it on generates no new failures in the > testsuite, Woo hoo! > The problem is likely to be PPC which claims to support eh but doesn't > support it completely yet AFAIK. I suggest setting >

Dear R-users, I'd like to turn a vector so it starts with it's end. For better understanding, this set of commands will do what I need: i <- seq(1:10) i_turned <- i for (j in 1:length(i)) i_turned[j] <- i[length(i)-j+1] now, i_turned is what I call turned. Is there a function which would make a script lighter? Thank you upfront for any hint. Best regards, Zroutik