search for: ttyusb1

...d I have jpilot syncing fine with this Palm over the network, BTW. For USB, I set things up for udev as described on various websites. Here are the relevant ports & symlink (created and deleted automatically with each sync attempt): lrwxrwxrwx 1 root root 7 Oct 17 09:09 /dev/pilot -> ttyUSB1 crw-rw---- 1 root uucp 188, 0 Oct 17 09:09 /dev/ttyUSB0 crw------- 1 marc uucp 188, 1 Oct 17 09:09 /dev/ttyUSB1 I added myself to the uucp group. It doesn't look like this is a permissions issue, does it? (I saw a message in the list's archives indicating that one must start jpilot a...

How do you go about configuring comm ports in Wine? I have a usb to serial adapter that is using ttyUSB1 under linux. The program I want to use under wine shows only the standard Windows comm ports; i.e, com1, com2, etc. How can I redirect those to ttyUSB1? dick

...12 13:49:10] ERROR[13347]: chan_dongle.c:442 do_monitor_phone: >> [dongle0] timedout while waiting 'OK' in response to 'AT' >> -- [dongle0] Error initializing Dongle >> -- [dongle0] Dongle has disconnected >> -- [dongle0] Trying to connect on /dev/ttyUSB1... >> -- [dongle0] Dongle has connected, initializing... >> [Feb 12 13:49:25] ERROR[13348]: chan_dongle.c:442 do_monitor_phone: >> [dongle0] timedout while waiting 'OK' in response to 'AT' >> -- [dongle0] Error initializing Dongle >> -- [don...

Yes I used. The problem can be the version of Asterisk? I use Asterisk 13 instead of 11. 2016-02-12 14:31 GMT-02:00, Shabbir abbasi <shabbirabbasi92 at gmail.com>: > have changed this > [dongle0] > audio=/dev/ttyUSB1 > data=/dev/ttyUSB2 > > To > > [dongle0] > imei=123456789012345 > > and imei exact same as on your device ? > > On Fri, Feb 12, 2016 at 9:29 PM, Vitor Mazuco <vitor.mazuco at gmail.com> > wrote: > >> Yes, I used IMEI. >> >> But in CLI appe...

...ar for me all time this error [Feb 12 13:49:10] ERROR[13347]: chan_dongle.c:442 do_monitor_phone: [dongle0] timedout while waiting 'OK' in response to 'AT' -- [dongle0] Error initializing Dongle -- [dongle0] Dongle has disconnected -- [dongle0] Trying to connect on /dev/ttyUSB1... -- [dongle0] Dongle has connected, initializing... [Feb 12 13:49:25] ERROR[13348]: chan_dongle.c:442 do_monitor_phone: [dongle0] timedout while waiting 'OK' in response to 'AT' -- [dongle0] Error initializing Dongle -- [dongle0] Dongle has disconnected In dongle.con...

...wer Intelligent Online LCD UPS. connected with serial cable. #upsc battery.voltage: 24.96 battery.voltage.low: 21.5 battery.voltage.nominal: 24.0 beeper.status: enabled device.mfr: device.model: device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB1 driver.version: 2.6.3 driver.version.internal: 1.51 input.current.nominal: 5.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 224.3 input.voltage.fault: 0.0 input.voltage.nominal: 220 output.voltage: 230.7 ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware: R1.1.1 ups.load:...

...raging. My Palm Pilot is actually a Tungsten E, not a T, but I'm not sure that's a level of detail that matters at this point. The Kpilot documentation suggest that I look for the palm pilot at /dev/ttyUSB0. That didn't work, but I noticed in my /dev/ directory that there was also a ttyUSB1. That didn't work either. But then I noticed that both were only apparent when I was hot syncing my Palm, so they must be connected to it. Any ideas, then, as to why Kpilot is not acknowledging them as a Palm device the way that lsusb does? Dave

...link in my local udev rules: BUS="usb", SYSFS{product}="Palm Handheld*", KERNEL="ttyUSB*[13579]", SYMLINK="pilot" And it seems to work fine for doing normal sync operation to Gnome Palm applet (well, not sure about that KERNEL parameter, however ttyUSB0 and ttyUSB1 look exactly the same, no other way to specify "use second device" as far as I can see). But, if I use the USB connection to connect to the network (using my Linux box as gateway by running "pppd auth -chap +pap login local ms-dns 10.0.0.1 10.0.0.1:10.0.0.2 pilot" and doing SNA...

Hi I have a serial UPS connected using a serial2USB device. Usually it is port=/dev/ttyUSB0, but occasionally i need port=/dev/ttyUSB1. How do you guys handle something like this? JonB

...world-writable, I'm not sure how to proceed. Retracing some of the steps given tome on this list before, I can see that the relevant device files have the following permissions: [root at localhost dev]# ls -l /dev/ttyUSB* /dev/pilot lrwxrwxrwx 1 root root 7 Sep 3 11:57 /dev/pilot -> ttyUSB1 crw-rw---- 1 root uucp 188, 0 Sep 3 11:57 /dev/ttyUSB0 crw------- 1 dave uucp 188, 1 Sep 3 11:57 /dev/ttyUSB1 So, I either want to give the user "dave" permission to use ttyUSB 1 and 0, or make those files world-writable. But where I hit a wall is that I can't figure out how to...

I tried this [dongle0] ;audio=/dev/ttyUSB1 ; tty port for audio connection; no default value ;data=/dev/ttyUSB2 ; tty port for AT commands; no default value ; or you can omit both audio and data together and use imei=123456789012345 and/or imsi=123456789012345 ; imei and imsi must contain exactly 15 digits ! ;...

...when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this: apcsmart[2285]: smartmode: issuing 'Y' failed: Input/output error while upsd becomes unhappy: upsd[2311]: Data for UPS [apc] is stale - check driver (because now it can't talk to the UPS) After this, a shutdown usually follows, though my...

Hi All I am connecting a ups via a usb to serial converter. Works fine, however when the converter is unplugged and plugged back in, udev creates another device e.g instead of ttyUSB0 it creates ttyUSB1. Here is the udev rule that I added to the top of the 025_nut-usbups.rules file in order to create a static symlink should udev decide to create the device as either ttyUSB0 or ttyUSB1. KERNEL=="ttyUSB?", MODE="664" GROUP="nut", SYMLINK+="upsserial2usb" T...

...tos 5. I can make it dial out with wvdial only when I'm the root user. Otherwise I get this error: Cannot open /dev/ttyUSB0: Device or resource busy I added the user to the uucp group. crw-rw---- 1 root uucp 188, 0 Dec 3 02:30 /dev/ttyUSB0 crw-rw---- 1 root uucp 188, 1 Dec 3 02:30 /dev/ttyUSB1 crw-rw---- 1 root uucp 188, 2 Dec 3 02:30 /dev/ttyUSB2 crw-rw---- 1 root uucp 188, 3 Dec 3 02:30 /dev/ttyUSB3 What have I missed? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com DRY CLEANER BUSINESS FOR SALE ~ http://www.canadadrycleanerforsale.com

...lower case I should note, wine will not recognize COM1) it actually starts sending out data (verified using a terminal on the other end). But it receives nothing :-( The PC runs ubuntu lucid. The serial port is a usb dongle udev correctly detects the dongle and creates 2 serial ports ttyUSB0 and ttyUSB1 (yes this is correct behavior for the device). A piece of mono software runs fine under ubuntu using both the ports (as it does under windows .NET on a Windows XP machine) Wine version is 1.1.42 I noticed other people mentioning this bug, but found no resolutions. Any suggestions? Ferry -------...

...choice Jun 26 10:55:24 nc4010 kernel: visor 1-2:1.0: Handspring Visor / Palm OS convert er detected Jun 26 10:55:24 nc4010 kernel: usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0 Jun 26 10:55:24 nc4010 kernel: usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1 Jun 26 10:55:47 nc4010 kernel: usb 1-2: USB disconnect, address 11 Jun 26 10:55:47 nc4010 kernel: visor 1-2:1.0: device disconnected Sync runs nicely, the files on the Treo are backed up to the director specified in

...t registered for GSM modem (1-port) kernel: option 2-1.2:1.0: GSM modem (1-port) converter detected kernel: usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 kernel: option 2-1.2:1.1: GSM modem (1-port) converter detected kernel: usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 kernel: option 2-1.2:1.2: GSM modem (1-port) converter detected kernel: usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 kernel: usbcore: registered new interface driver option kernel: option: v0.7.2:USB Driver for GSM modems logger: usb_modeswitch: adding device ID 19d2/16/0: to dri...

...g to collect some information on using serial UPSes with NUT via USB-to-serial converters, but you can adapt the udev rules to match your converter, and even create a symlink so that it will not change names. (If a process has /dev/ttyUSB0 open, and the USB cable is unplugged, udev will create /dev/ttyUSB1 when it is next plugged in, which will not match the configuration file) > Then i test driver with that command: /lib/nut/apcsmart -D -a ups > > Results: > > Network UPS Tools - APC Smart protocol driver 3.04 (2.6.4) > APC command table version 3.0 > 0.000000 debug le...

...g to collect some information on using serial UPSes with NUT via USB-to-serial converters, but you can adapt the udev rules to match your converter, and even create a symlink so that it will not change names. (If a process has /dev/ttyUSB0 open, and the USB cable is unplugged, udev will create /dev/ttyUSB1 when it is next plugged in, which will not match the configuration file) > Just confirmed that the default udev rules for Raspbian wheezy will create some symlinks in /dev/serial/by-path and /dev/serial/by-id which should be useful. I have an inexpensive USB-to-serial cable which does not hav...

I now have my three com ports woking: com1 with symbolic link to ttyS1, com2 to ttyUSB0 and com3 to ttyUSB1. To get them to work I had to change permissions to the devices in /dev. I had to make sure that everything in my windows application was set to owner richard and group users so I could get everything working without being su. I can now carry out my comms via an HF radio link using Pactor, and c...