search for: tripplitesu

The 2.0.2+ tripplitesu drivers do not recognize SmartOnLine SU2200XL and possibly other SmartOnLine UPSes. Here is a one-line fix. Lee --- ../nut-2.0.2/drivers/tripplitesu.c Thu Jan 27 08:33:21 2005 +++ drivers/tripplitesu.c Sat Oct 1 13:38:51 2005 @@ -227,7 +227,7 @@ buffer[4] = '\0'; if (!strcmp(buffe...

...I have used this UPS since late in 2003 with nut version 1.4.1, locally > built on a slackware system. When I compiled a local version of 1.4.3 on > my new debian etch system, I was able to get nut to work with the ups, > so it looks like a regression to me. > > The problem is in the tripplitesu driver. Somewhere after 1.4.3 it > becomes apparently incapable of recognizing a Tripplite SU1000RTXL2U. > > By the way, I don't think I made an error in the permissions or > configuration files in the debian etch standard nut package. I had an > APC ups working happily with the...

...these drivers? Is there another driver that's known to work with this UPS or can this one be "tweaked" to work? Can it be as simple as a baud rate mismatch? I'm not having much luck querying the serial port's settings. In ups.conf I have: [UPS-0040] driver = tripplitesu # driver = tripplite port = /dev/ttyACM0 desc = "TrippLite SU3000XLCD" using tripplitesu: upsdrvctl start Network UPS Tools - UPS driver controller 2.6.4 Network UPS Tools - Tripp Lite SmartOnline driver 0.03 (2.6.4) Warning: This is an experimental driver. So...

I have several Tripplite SU2200RMXL2U and SU3000RM2U units that I would like to monitor using Nut. I have tried to attach to the units using a serial cable with the tripplite and tripplitesu drivers with no success. The drivers simply seem to not recognize the UPS. I then tried using the tripplite_usb driver with the usb cable. It definitely sees the UPS but I am getting errors which told me to report the results to this mailing list. ------------------------------------ # /sbin/...

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

Can anyone help getting a Tripplite SU2200XL to work with nut 2.0.3 using the supplied serial cable? Starting the ups service yields: Starting tripplitesu: Network UPS Tools - Tripp Lite SmartOnline driver 0.02 (2.0.3) Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 I also have Tripplite's PowerAlert 12 software installed and when run it finds the UPS without a problem. So the cable is connected properly. The details: CentOS 4....

I have a new SMART1050SLT Tripp Lite UPS that both tripplite and tripplitesu drivers hate. Both simply time out with a "can't find" message. Does anyone know about the SmartPro series?

...ly connection on this model) using the 2.4 code branch. It uses the Protocol 1004 from the tripplite specification that can be use either used on serial or USB device. Since my device was only serial, I worked only on the serial integration. Since I found nothing in tripplite.c, tripplite-hid.c, tripplitesu.c to support my model, I have done trippliteser.c in order to support my unit. Not all the functionality are there but the core functionality is there. Since it is licence as GPLv2, I just want to push back my modifs to the community but really don't know the procedure. thank for the help P...

....4 code branch. It > > uses the Protocol 1004 from the tripplite specification that can be use > > either used on serial or USB device. Since my device was only serial, I > > worked only on the serial integration. Since I found nothing in > > tripplite.c, tripplite-hid.c, tripplitesu.c to support my model, I have > > done trippliteser.c in order to support my unit. Not all the > > functionality are there but the core functionality is there. Since it > > is licence as GPLv2, I just want to push back my modifs to the community > > but really don't kn...

I'm having trouble with the usbhid-ups driver and Windows. NUT won't connect to an APC SmartUPS 3000 via USB. I've had good success with NUT and Raspbian as well as NUT and Windows using the tripplitesu driver. The current system is: Windows 7 Enterprise 64 bit NUT 2.6.5-6 installed from MSI installer downloaded from networkupstools.org libusb-win32-bin-1.2.6.0 installed and appears to work. APC Smart-UPS 3000 RM XL FW:691.19.D USB FW:7.4 is listed under libusb-win32 devices in device manager...

...he PC and running Tripp-Lite's PowerAlert SW on Server 2003 shows no problems over the USB interface (not sure if this is relevant or not). I have attached three NUT debugging ouputs. The first two are via the USB interface using usbhid-ups, and the third is from the serial interface using tripplitesu. The difference between the first and the second is that the second one was taken after adding "pollfreq = 5" and "pollinterval = 10" to the ups.conf file. The three commands used to generate the output were: /usr/local/ups/bin/usbhid-ups -DDD -a su1500 /usr/local/ups/bin/usbh...

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

...gt; apcsmart clone mge-shut riello_usb >> apcsmart-old clone-outlet mge-utalk safenet >> apcupsd-ups dummy-ups microdowell solis >> bcmxcp etapro nutdrv_atcl_usb tripplite >> bcmxcp_usb everups nutdrv_qx tripplitesu >> belkin gamatronic oldmge-shut tripplite_usb >> belkinunv genericups oneac upscode2 >> bestfcom isbmex optiups upsd >> bestfortress ivtscd powercom upsmon >> bestuferrups liebert powerpanel...

...? clone???????? mge-shut riello_usb >> apcsmart-old? clone-outlet? mge-utalk??????? safenet >> apcupsd-ups?? dummy-ups???? microdowell????? solis >> bcmxcp??????? etapro??????? nutdrv_atcl_usb tripplite >> bcmxcp_usb??? everups?????? nutdrv_qx tripplitesu >> belkin??????? gamatronic??? oldmge-shut tripplite_usb >> belkinunv???? genericups??? oneac upscode2 >> bestfcom????? isbmex??????? optiups????????? upsd >> bestfortress? ivtscd??????? powercom???????? upsmon >> bestuferrups? l...

...916) +++ drivers/tripplite_usb.c (working copy) @@ -1345,7 +1345,7 @@ void upsdrv_banner(void) { printf("Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver %s (%s)\n", - DRV_VERSION, UPS_VERSION); + DRV_VERSION, upsversion()); experimental_driver = 1; } Index: drivers/tripplitesu.c =================================================================== --- drivers/tripplitesu.c (revision 916) +++ drivers/tripplitesu.c (working copy) @@ -804,7 +804,7 @@ void upsdrv_banner(void) { printf("Network UPS Tools - Tripp Lite SmartOnline driver %s (%s)\n\n", - DRV_...

Greetings, I have a Tripp-Lite SU6000RT4U unit connected via USB and RS-232. # tripplitesu -DD -u root -a tl6000 Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 # tripplite -DD -u root -a tl6000 Failed to find UPS - giving up... # newhidups -DD -u root -a tl6000 Checking device (09AE/4002) (001/003) - VendorID: 09ae - ProductID: 4002 - Manufacturer: Tripp Lite - Product:...

Hello list! I can't seem to get this running via RS232 monitoring; I've been told that NUT won't support serial connections, and find this hard to verify. Does anyone else have this running on the SU10KRT3U via RS232? If so, what driver did you use? I'm getting no satisfaction from the "tripplite" driver; upon upsdrvctl start, I get "Failed to find UPS - giving

...<adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Sun Mar 15 20:23:08 2009 > New Revision: 1805 > > Log: > Fix compiler warnings in functional code > > Modified: > trunk/drivers/belkin.c > trunk/drivers/mge-xml.c > trunk/drivers/tripplitesu.c > > Modified: trunk/drivers/belkin.c > ============================================================================== > --- trunk/drivers/belkin.c (original) > +++ trunk/drivers/belkin.c Sun Mar 15 20:23:08 2009 > @@ -1,6 +1,6 @@ > /* belkin.c - model specific rout...

...U3000XLCD. I?m using a Raspberry Pi running Raspbian (wheezy) with NUT 2.6.4. > > I can monitor my older TrippLite UPSs, mostly SU1000RT2Us, with this Pi and a USB to serial adapter. Interesting, we don't have that model number listed in our compatibility list[*]. Do they mostly use tripplitesu or tripplite? [*] http://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite > My first thought with the SU3000XLCD was to use the USB port instead of the serial port as that?s the ?modern? thing to do. When I plugged the USB cable in to the UPS it turned off, dropping the load. Th...