search for: tread

> Limiting the linux-server's max cpu-speed had > the most affect on performance: > (limited to 1.6GHz instead of 2.4GHz) (33% limitation) The server is equipped with an 6 core / 12 tread 3.6 GHz CPU (Intel Core i7-980x   and  a Raid 10 Disk array. The cpu is 90% idle (including webserver traffic and mailserver traffic) during downloads. There is no encryption because the samba VM it is over vpn  (I get fulls speed with FTP over VPN) For the rest I will test your hints. Kind...

...are because we have desactivated/changed all the other items The only 2 items that we have not changed is the mobo and the power supply. At first it was on scsi drives but we re-installed using a IDE drive We deactivated the two onboard nic and tried two different brand. We have deactivated hyper-treading We have deactivated USB We have deactivated SATA We have tried a noise-cancelling power-bar We have tried two different phones lines We have tried several IP phones, Cisco, Snom, Gnet (There is no noise for a call between two phones) The phone is connected directly in the nic card so there is no...

...assenger. I get this: "Forbidden You don''t have permission to access / on this server." when I put depot.yourhost.com in the browser. I have been through various web searches and for file permissions and suggestions to change the <Files> container. However, before I tread where I fear in the land of conf I thought perhaps it may be a simple config issue and my lack of understanding of how things are knitted together. Here is my Virtual host config: <VirtualHost *:80> ServerName depot.yourhost.com DocumentRoot /home/railsapps/rails_3/depot/public/ <Directo...

...gt; > Is there a bug filed on https://bugzilla.redhat.com/ yet? Have you submitted the errors you encountered anywhere? Richard on CentOS-devel mailing list has similar problem but suggests it might be issue only with CentOS, he says he had to add the kernel line to make it work. Name of the tread is: [CentOS-devel] Booting CentOS 8 in a VM - can't find the disk > > -- > Jonathan Billings > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos > -- Ljubomir...

Hi, Does anyone know a way to override .blank? method that rails provides. I want to add additional custom checks (specific to my application) to this method. Thanks, Pratik

Dear R-users, I am a newbie to this site and a relative new-comer to S/R, so please tread lightly, for you tread... There have been several posting relating to problems with augPred() from the nlme library. Here is a "fix" for one of these problems which may lie at the root of others. In my case the problem with augPred() lay in gsummary(), which augPred() uses, causing it t...

...? >> > > Please submit a patch to llvm-commits, with a test case that exercises the fix. > > Eli Before I submit the patch, I was wondering if it would be better to add a -eh-frame option to llvm-dwarfdump, like in the dwarfdump utility. Otherwise the eh_frame section would be treaded as a debug_frame section. What do you think? Also, how can I do a partial match on the output of dwarfdump/FileCheck? For example: pc=00527a01...08598611 .. is in the output, but the exact pc addresses do not matter when checking whether a line is in the output or not. -- Erik.

Each of the main TableGen files for the supported targets includes include "llvm/Target/Target.td" In turn, Target.td includes include "llvm/IR/Intrinsics.td" The final lines of Instrinsics.td are include "llvm/IR/IntrinsicsPowerPC.td" include "llvm/IR/IntrinsicsX86.td" include "llvm/IR/IntrinsicsARM.td" include

Hi to all, I found in the R-help archive how to calculate the p-value for a gee result: http://finzi.psych.upenn.edu/R/Rhelp02a/archive/74150.html but there are two questions (I am afraid they are basic questions ...) 1. why is the result multiplicated with 2 2. how could I decide between lower.tail =TRUE and FALSE: example:

...MIPS target, suggesting to me that it's still a good starting point. Finally, I would really like to see this optimization be promoted from -Oz to -Os. Doesn't it satisfy the criteria for -Os over -Oz? Tim's other commit was about stack adjustment folding. So, Tim, did you see the treads with Andrea Mucignat back in October? She asked for some help so that she could provide a patch to improve machine code generation for Thumb entry/exit points. No one with knowledge about the matter responded. This commit of yours looks to me like you do have some knowledge about it. She seems...

.... On many of the nodes, the puppetd process take up a ton of resident memory (> 400MB RES in top, > 500GB VIRT in top) after running for a while (> 1 week). The only thread I found on this was titled "memory leak?" and last updated on 06-Dec-2007. The question on that tread was whether or not the memory was buffered memory. I can say that for my case, it is resident memory (RES under top). One other thing to note is that on nodes where the configuration is small (not many files synched), the memory doesn''t blow up that big (stays at < 100MB). Ha...

...on was not to find faults with icecast, shout or your how-to. I am new to this list and to icecast (1, 2 or whatever). Your how-to helped me a lot (so did the comments of Mike and Boink). However, maybe there should be a note on the how-to to indicate people like me the issues mentioned on this tread about the use of encrypted passwords. Thanks a zillion! David Correa Network Engineer Key fingerprint 7F2C E072 479D 71B4 008B 373E A284 8CDE 7659 F5D8 --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, se...

...for year... > > I'll keep my fingers crossed, that it happen in 4.2 > > Andrew Bartlett has expressed an opinion on the samba technical list > that he'd be in favour of a very short 4.2 cycle if it means getting > these sort of updates out. There is some news for this tread? Samba 4.3 is out: https://www.samba.org/samba/history/samba-4.3.0.html and into Fedora Development there's already new package: https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/x86_64/os/Packages/s/ But the "samba-ad" package still missing. Someone have more info...

...x_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } userdb { driver = passwd } ----------------------------------------------------------- But, If I turn on SSL option with encrypt key and certicate, all port 143, 993 just disappeared. I treaded this issue in ubuntu ASK but still no proper answer so far http://askubuntu.com/questions/722072/dovecot-doesnt-listen-on-993imaps --------------------------SSL option version---------------- auth_mechanisms = plain login mail_location = maildir:~/Maildir namespace inbox { inbox = yes loca...

Dear R-dev, I would like to accelerate my R computation by using parallel OpenMP compilers (e.g from Pathscale) on a 2-processor AMD server and I would like to know whether R is a tread safe library. The main kernel of the OpenMP parallelization is a C SEXP function that performs the computational routine in parallel with: ******************* SEXP example(SEXP list, SEXP expr, SEXP rho) { R_len_t i, n = length(list); SEXP ans, alocal; omp_lock_t lck;...

...is still data on those locations and will never release those allocated blocks. New firmware/microcode versions are able to reclaim that space if it sees a certain number of consecutive zero''s and will reclaim that space to the volume pool. Are there any thoughts on writing a low-priority tread that zeros out those "non-used" blocks? Given the scalability targets of Btrfs it will most likely be heavily used in the enterprise environment once it reaches a stable code level. If we would be able to interface with these array based features that would be very beneficial. Furtherm...

...nable to access index for repository http://www.stats.ox.ac.uk/pub/RWin/bin/windows/contrib/2.1 Error in install.packages(NULL, .libPaths()[1], dependencies = TRUE, type = type) : no packages were specified I have uninstalled and reinstalled R 2.1.0 to no avail. I read through the recent treads on similar problems, but if an answer to my problem we given, I missed it. Thanks Greg Blevins The Magrket Solutions Group, Inc. [[alternative HTML version deleted]]

There was a tread that I googled for and could not find about Asterisk being open to SIP DOS Attacks. I have a customer whose machine was hammered last light by traffic on its SIP port causing the OS to use up its resources. Namely number of open files. The discussion was around the fact that the Sip protocol ans...

hi i installed last wine for ubuntu 8.10 i followed a valid guide to run Dreamweaver CS4 in wine. i renamed in lower-case manifest and winsxs ( before i got several errors of files not found .. ) but now wine terminal shows me a bunch of this message ( all the same ) wine: Call from 0x6e22aca4 to unimplemented function msvcrt.dll._except_handler4_common, aborting and at the end ...

I never figured out how I should tread error 13 from rsync, "Problem with diagnostics". My question is, is this a transient or permanent error? Or how seriously did something go wrong when rsync returns 13? I don't get much smarter reading the rsync source either. For reference this is for Lsyncd, which watches files with...