search for: tracepath

I have a DMZ (eth2: 10.0.100.0) and a LOC1 (eth0: 10.0.0.0) defined on my firewall. On one of the port on the switch serving LOC1 I have now a router and a switch feeding a bunch of computers with net=10.0.200.0. While I have defined a route to reach LOC2, I would like to define also a specific zone in order to assign different rules to it. Is it possible ? if yes, what is the syntax of the

Hi there. I''ve two Internet connections at the same box, one connection is made through ADSL, and another is made with a Radio-Link (WaveLAN IE822). I wan''t to do a backup connection with the ADSL link. With what tools I can do this? ipchains, iptables, a third party tool? -- ____________________________________________________________ PIII 500MHz - 98MB RAM -

...ConnectTo = host2 host2 tinc.conf: Name = host2 DeviceType = tap Interface = tap0 Restarted tincd and it cried about /dev/tap0 not existing. So I made it: mknod /dev/tap0 c 36 16 Restarted tincd and tried my pings again. They went unanswered. =\ Ran a tracepath on the IP and got: [root at host1 test]# tracepath 10.90.42.242 1: 10.90.41.241 (10.90.41.241) 0.123ms pmtu 1500 1: 10.90.42.242 (10.90.42.242) 0.524ms pmtu 1445 1: no reply 2: no reply...

...x loadkeys ping6 sync ypdomainname cp false login ps tar zcat cpio fgrep ls pwd tcsh csh gawk mail red touch cut gettext mailx rm tracepath date grep mkdir rmdir tracepath6 Regards. .... 'Good day Sir. 'I am trying to do LiveCD as described in Scientific Linux Live CD Page <http://linux.web.psi.ch/livecd/build.html> Yet i fail.... 'the system is running CentOs kernel 2.6.9-42.0.2.plu...

Am using Asterisk 11.2 in one location and 11.1 in another location. when I trunk between two servers, the status is unreachable. But with different server with 11.2 and 11.2 it works fine. I tried both IAX and SIP. the trunk in sip.conf what i have is, [serverb] type=friend username=serverb secret=serverb host=10.10.10.5 port=5060 context=default insecure=port,invite dtmfmode=rfc2833

...o us a lot of data (large form, or file > upload), packets seem to not reach backend server. > He does not have any problem for reading web pages or download files. > Only when he uploads to us. > > When the client is accessing our network from a network where its PMTU > is 1460 (tracepath to us), upload requests fail. > When the same client is accessing our network from another network where > its PMTU is 1462, upload is successful. > When the same client is accessing our network from another network where > its PMTU is 1500, upload requests fail. Can you check what tin...

...''s built-in NFS-root, with its filesystem stored on the NFS machine. I set the MTU to 9000 on eth1, peth1, and vif0.1 (on the physical machines) on the three machines, and the xenbr1 bridge on dom0 correctly displays MTU 9000 now. I used "ping -s 8000 <ip>" and "tracepath <ip>" to determine connectivity between the machines. The two physical servers, NFS and dom0, work completely and can send 9000 byte packets back and forth. However, domU was not so lucky. I can send 9000 byte packets *out* of domU without a problem to both the NFS server and the...

Hi all, I have several locations, each connected by a Sonicwall VPN through PPPOE DSL, with Snom 360 phones. I've found that I have to tweak the Asterisk server MTU (inside one of the firewalls) to get everything to work "just right". Set the server MTU too low, and the Snom phones don't communicate correctly anymore. Too high and the phones work, but the server can't

...ntfs-3g-system-compression openssh-clients - pcre policycoreutils reiserfs-utils - libselinux syslinux-extlinux systemd dnl for /sbin/reboot and udevd vim-minimal xz - yara zfs-fuse ) @@ -79,17 +70,7 @@ dnl iproute has been renamed to iproute2 iputils-tracepath isc-dhcp-client ldmtool - libaugeas0 libc-bin - libcap2 - libhivex0 - libjansson4 - libpcre3 - libsystemd0 - libsystemd-id128-0 - libsystemd-journal0 - libtirpc1 - libyara3 linux-image dnl syslinux 'suggests' mtools, but in reality it's a hard dependency: mto...

Friends, I have updated my Asterisk 1.2 presentation with the latest information. It is still available in the same place as before: http://www.astricon.net/asterisk1-2/ Please continue to test the beta of Asterisk 1.2, available at ftp.digium.com. We need all the feedback we can get. If you are a developer and have some time for community work, please check in with the bug tracker and help us

v3: - Various changes to dhclient/dhcpcd as discussed on the mailing list.

Hi, I have a fresh CentOS 5.8 Vagrant VM that I''m using to emulate a customer''s server. During the first Puppet run, it takes 13 minutes and 48 seconds to sync the Puppet Labs stdlib module. On a similar Ubuntu 12.04.1 Vagrant VM, Puppet starts up, and almost instantly goes from plugin sync to facter load. Is this load time for stdlib on a RHEL variant normal?

Hi, Hopefully this won''t be too off-topic (I''ve seen both bonding & vlan mentioned on the list, but not really together). I''ve tried to get bonding (2 x 100Mb EEPro, but will want to try on 1000BaseT) and vlans to work together, but without luck. I can get them working fine (seemingly at least - I didn''t tried bursting on the bonded port) individually.

I am a rank newbie to Linux and wine. I am running Ubuntu Dapper on an AMD 1800 mhz machine, wine 0.9.15 Everything I have read says use the installer to load windows programs. Where is the installer? Thanks, -- Ron Thompson On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA http://www.plansandprojects.com My hobby pages are here: