search for: tpio

...wRev=SD15, SerialNo= Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 AdvancedPM=no WriteCache=enabled Drive conforms to: unknown: * signifies the current active mode So from recommendation on website I did this to mat...

We run several RH7.2/7.3 servers & recently 2 of them, although still working fine, have started to show kjournald as generally using over 50% cpu% on 'top' - virtually continuously. Free cpu% generally less than 25% now! Both machines are also using software RAID5 EIDE ....... otherwise are standard server installs. Any info on what kjournald is & why it should have recently

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of

...dev/hda /dev/hda: Model=QEMU HARDDISK, FwRev=0.12.1, SerialNo=QM00001 Config={ Fixed } RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4 BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=73400320 IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 published, ANSI NCITS 340-2000: * signifies the current active mode The bonn...

...A0G1, SerialNo=11BPWF Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=36477, SectSize=579, ECCbytes=4 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=58605120 IORDY=yes, tPIO={min:400,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 udma5 AdvancedPM=yes: mode=0x80 (128) Drive Supports : ATA/ATAPI-5 T13 1321D revision 3 : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 [root@in...

...86 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA...

..., SerialNo=CLP425F4GJUT9A Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=7898kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78140160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: 2 3 4 5 BTW I set udma2 (hdparm -X udma...

...A66A, SerialNo=VNVB30G8TD23UH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=66055248 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive Supports : Reserved : Reserved : Reserved : ATA/ATAPI-6 T13 1410D revision 1 : Reserved : Reserved : Reserve...

...6/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16 DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0 CurCHS=4047/16/255, CurSects=-217054981, LBA=yes, LBAsects=160086528 tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 UDMA modes: mode0 mode1 mode2 mode3 mode4 *mode5 mode6 [ct_sys@installed TEST]# hdparm /dev/hda /dev/hda: multcount = 16 (on) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr...

...8428 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=20044080 IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 *udma4 AdvancedPM=no WriteCache=enabled Drive conforms to: device does not report version: 1 2 3 4 /sbin/lspci= 00:00.0 Host bridge: VIA Tech...

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

...6OA30A, SerialNo=JMYJMFJ4664 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34 BuffType=DualPortCache, BuffSize=1961kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=40088160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 AdvancedPM=no Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *u...

Hello, With reference to the problems listed below. I too am having incredibly long start up times. I''m talking minutes here (around 5 minutes). My configuration is not complex I don''t think. We are you using ldap too and the settings are bellow. The network is up as I''m restarting shorewall whilst the machine is running. Any suggestions? Is there no way to

When I copy a file(13Megs) from /home/ to /tmp/, sync takes almost 2 minutes. When I copy the same file to /usr/local/, sync returns almost right away. Both filesystems are ext3 and are on the same harddrive. When sync is running, the harddrive light stays on but I don't hear it doing anything. dmesg doesn't show any errors either. Below is the `time` output for each command. If you