search for: to_drm_encod

...0ab69df7e8f..3f046b917c85c 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c @@ -35,6 +35,24 @@ #include <nvif/if0004.h> +struct nouveau_connector * +nv04_encoder_get_connector(struct nouveau_encoder *encoder) +{ + struct drm_device *dev = to_drm_encoder(encoder)->dev; + struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; + struct nouveau_connector *nv_connector = NULL; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + if (connector->encoder == to_d...

It seems it was only locking up in the context of nouveau_hw_save_vga_fonts, when it actually did something (because the console wasn't already in graphics mode). Signed-off-by: Francisco Jerez <currojerez at riseup.net> --- drivers/gpu/drm/nouveau/nouveau_hw.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.c

This patch series adds TV-out modesetting support to the KMS implementation. I've tried to test it on all the hardware I've got at hand (that is nv11, nv17, nv34, nv35, nv40, nv4b) with every possible output combination; I believe it has reached a mergeable state, however it depends on some commits from drm-next that haven't got into Linus' tree yet, if you agree to merge this

The patches contain some tidy-up work, and refactoring that has arisen as a by-product of my initial work on adding TV support to nv50. Joel Holdsworth (4): drm/nouveau: Removed unneeded include in nvc0_fence.c drm/nouveau: Replaced magic numbers with defines from nouveau_reg drm/nouveau: Replaced copy-pasted nv_wait with nv50_wait_dpms_ctrl helper drm/nouveau: Refactored encoder

...; #include <drm/drm_edid.h> #include <drm/drm_crtc_helper.h> +#include <drm/drm_atomic.h> #include "nouveau_reg.h" #include "nouveau_drv.h" @@ -769,7 +770,7 @@ nouveau_connector_set_property(struct drm_connector *connector, struct drm_encoder *encoder = to_drm_encoder(nv_encoder); int ret; - if (connector->dev->mode_config.funcs->atomic_commit) + if (drm_drv_uses_atomic_modeset(connector->dev)) return drm_atomic_helper_connector_set_property(connector, property, value); ret = connector->funcs->atomic_set_property(&nv_connector-...

To start off: this patch series is less work to review then it looks - most (but not all) of the nouveau related work has already been reviewed elsewhere. Most of the reason I'm asking for an RFC here is because this code pulls a lot of code out of i915 and into shared DP helpers. Anyway-nouveau's HPD related code has been collecting dust for a while. Other then the occasional runtime PM

...syc = nouveau_conn_atom(connector->state); struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; + struct nouveau_conn_atom *asyc = &nv_connector->properties_state; struct drm_encoder *encoder = to_drm_encoder(nv_encoder); int ret; diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index de9588420884..2d70dea4018b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -118,6 +118,12 @@ struct...

...syc = nouveau_conn_atom(connector->state); struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; + struct nouveau_conn_atom *asyc = &nv_connector->properties_state; struct drm_encoder *encoder = to_drm_encoder(nv_encoder); int ret; diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index de9588420884..de84fb4708c7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -118,6 +118,12 @@ struct...

...syc = nouveau_conn_atom(connector->state); struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; + struct nouveau_conn_atom *asyc = &nv_connector->properties_state; struct drm_encoder *encoder = to_drm_encoder(nv_encoder); int ret; diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index de95884208848..de84fb4708c7a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -118,6 +118,12 @@ struc...

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually possible and requested. Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually possible and requested. Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>

...status nouveau_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) @@ -1041,7 +1060,6 @@ nouveau_connector_mode_valid(struct drm_connector *connector, struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; struct drm_encoder *encoder = to_drm_encoder(nv_encoder); unsigned min_clock = 25000, max_clock = min_clock; - unsigned clock = mode->clock; switch (nv_encoder->dcb->type) { case DCB_OUTPUT_LVDS: @@ -1064,29 +1082,14 @@ nouveau_connector_mode_valid(struct drm_connector *connector, case DCB_OUTPUT_TV: return get_slave_f...

Place the declaration of struct nouveau_conn_atom above that of struct nouveau_connector. This commit makes no changes to the moved block what so ever, it just moves it up a bit. This is a preparation patch to fix some issues with connector handling on pre nv50 displays (which do not use atomic modesetting). Signed-off-by: Hans de Goede <hdegoede at redhat.com> ---

This is more or less simplified series of patches that bring power usage on my NV86 close to that of binary blob. Best regards, Maxim Levitsky

Place the declaration of struct nouveau_conn_atom above that of struct nouveau_connector. This commit makes no changes to the moved block what so ever, it just moves it up a bit. This is a preparation patch to fix some issues with connector handling on pre nv50 displays (which do not use atomic modesetting). Signed-off-by: Hans de Goede <hdegoede at redhat.com> ---

...struct drm_display_mode *mode) @@ -1053,7 +1030,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector, struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; struct drm_encoder *encoder = to_drm_encoder(nv_encoder); - unsigned min_clock = 25000, max_clock = min_clock; + unsigned int min_clock = 25000, max_clock = min_clock, clock = mode->clock; switch (nv_encoder->dcb->type) { case DCB_OUTPUT_LVDS: @@ -1082,8 +1059,15 @@ nouveau_connector_mode_valid(struct drm_connector *connector...

...; #include <drm/drm_edid.h> #include <drm/drm_crtc_helper.h> +#include <drm/drm_atomic.h> #include "nouveau_reg.h" #include "nouveau_drv.h" @@ -769,7 +770,7 @@ nouveau_connector_set_property(struct drm_connector *connector, struct drm_encoder *encoder = to_drm_encoder(nv_encoder); int ret; - if (connector->dev->mode_config.funcs->atomic_commit) + if (drm_drv_uses_atomic_modeset(connector->dev)) return drm_atomic_helper_connector_set_property(connector, property, value); ret = connector->funcs->atomic_set_property(&nv_connector-...

...drm = nouveau_drm(connector->dev); @@ -1410,6 +1411,7 @@ nv50_sor_create(struct drm_connector *connector, struct dcb_output *dcbe) return -ENOMEM; nv_encoder->dcb = dcbe; nv_encoder->update = nv50_sor_update; + nv_encoder->dp.no_interlace = caps->dp.no_interlace; encoder = to_drm_encoder(nv_encoder); encoder->possible_crtcs = dcbe->heads; @@ -2132,6 +2134,7 @@ nv50_display_create(struct drm_device *dev) struct drm_connector *connector, *tmp; struct nv50_disp *disp; struct dcb_output *dcbe; + struct nv50_core_caps caps = { 0 }; int crtcs, ret, i; disp = kzalloc...

...drivers/gpu/drm/nouveau/nouveau_connector.c index dab78c660dd6..2468e81918fd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -770,9 +770,6 @@ nouveau_connector_set_property(struct drm_connector *connector, struct drm_encoder *encoder = to_drm_encoder(nv_encoder); int ret; - if (drm_drv_uses_atomic_modeset(connector->dev)) - return drm_atomic_helper_connector_set_property(connector, property, value); - ret = connector->funcs->atomic_set_property(&nv_connector->base, &asyc->state, property, va...

Just a backport of the two patches for v5.9 that you'll want to apply. The first one was Cc'd to stable, but I forgot to Cc the second one as well. Lyude Paul (2): drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid() drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid() drivers/gpu/drm/nouveau/nouveau_connector.c | 36 ++++++---------------