search for: tkphone

...39;s. It depends on which version you want to support (though supporting both wouldn't be really hard). > 2) Are there any commercially available SIP phones that support > Speex? No hardware phone that I know of (though there might be), but I at least a commercial SIP soft-phone called tkphone (http://www.thekompany.com/products/tkphone/). I don't know whether it's compilant with the IETF Speex draft. Also with the fixed-point port that's progressing, we may be closer to a hardware phone. > 3) Any suggested SIP soft-phones that support Speex? There's OpenH323 and al...

Hi, is there another IAX-CLient for Linux beside Gnophone? The problem with Gnophone is, when there is an incoming call. There is no pop-up-window or any sound that caughts my attention. So calls easily remain unanswerd. Or can I configure Gnophone in the desired way? Thx, Holger

...w.bigu.org/SRPMS/ Sound is fine. Doesn't seem to pick up anything from the microphone, though. ** kphone: Check out my SRPM at http://www.bigu.org/SRPMS/ Sound is fine. Picks up sound from the microphone, but the echo-test repeats it back after passing it through a Mr-Roboto filter. ** tkPhone: Sound is fine. Doesn't seem to be reading from the mic, no traffic going over the network after the 'demo-echotest' recording finishes. The following errors are continuously repeated from tkPhone: sent 63426 (3),received 30228 (3);read 615040 write 293120 need 608000 jitter 38...

...w.bigu.org/SRPMS/ Sound is fine. Doesn't seem to pick up anything from the microphone, though. ** kphone: Check out my SRPM at http://www.bigu.org/SRPMS/ Sound is fine. Picks up sound from the microphone, but the echo-test repeats it back after passing it through a Mr-Roboto filter. ** tkPhone: Sound is fine. Doesn't seem to be reading from the mic, no traffic going over the network after the 'demo-echotest' recording finishes. The following errors are continuously repeated from tkPhone: sent 63426 (3),received 30228 (3);read 615040 write 293120 need 608000 jitter 38...

Hello! I'm about to try to integrate SPEEX into the VOCAL project. If anyone has any pointers as to the best way to do this, please let me know. After reading the speex api man page, I have a few questions: 1) To encode, it appears I need an array of floats. If I am playing wav files, what is the best way to turn these into something speex can encode? 2) Are there any commercially

My problem is this. I am connected via fwd's iax protocol. I try to call the echo test, sometimes I get an answer, sometimes not. When I do, sound is about one second lagged - I still hear the ring about a second after I get the answering on console message, and the echo test takes about a second or second and a half to get back the answer. When I use asterisk with dmix and dsnoop, calling

DOes anyone have any good suggestions as to good SIP or IAX clients for linux? I have set up and am currently testing asterisk in a controlled environment. I have gnophone running on one of my boxes but the gnophone site has been down. So I can't seem to fing the IAX and Ix-devel rpms or the gsm and gsm-devel rpms. So that prevents me from setting up gnophone on another box. I am