search for: thirdpartyname

...(619) 364-4850>" allowsubscribe=yes And some of the Polycom phone config: reg reg.1.displayName="HFT0" reg.1.address="6193644850" reg.1.label="4850" reg.1.type="private" reg.1.lcs="" reg.1.csta="" reg.1.thirdPartyName="" reg.1.auth.userId="hft0" reg.1.auth.password="mysecret" reg.1.auth.optimizedInFailover="" reg.1.musicOnHold.uri="" reg.1.server.1.address="jtsd05" reg.1.server.1.port="" reg.1.server.1.transport=&qu...

Hi All, Can someone please advise me about configuring my Polycom IP600? I have an account with a SIP based IP Centrex provider. The basic SIP info and line 1 config points to them. That's working fine. I'd like to register line 2 with my own asterisk server. I've tried putting the basic registration info in the line 2 configs...but the phone never registers. Not certain how to

...1] mailbox=207 at default type=friend secret=password qualify=yes nat=no host=dynamic canreinvite=no == Polycom per-phone config on TFTP server == reg.1.displayName="207" reg.1.address="207" reg.1.label="207" reg.1.type="private" reg.1.lcs="" reg.1.thirdPartyName="" reg.1.auth.userId="ip4000_1" reg.1.auth.password="password" == Polycom company-wide config on TFTP server == server voIpProt.server.1.address="x.x.x.55"/> <SIP> <outboundProxy voIpProt.SIP.outboundProxy.address="x.x.x.55"/> </S...

I set up hints and presence monitoring on some Polycom phones connected to an asterisk server with the expectation that the phones that are "watching" other extensions would be notified when the other extension sis ringing, in addition to the other statuses (on the phone, statuses set by the user on the phone, not registered, etc). I can see when the line is in use, and when it is

...; Adjust the phone1.cfg file to be something descriptive for each phone that you want to configure. 2. In the phone1.cfg file you should have a line that looks like: <reg reg.1.displayName="" reg.1.address="" reg.1.label="" reg.1.type="private" reg.1.thirdPartyName="" reg.1.auth.userId="" reg.1.auth.password="" reg.1.server.1.address="" .../> The three things you NEED to change are: reg.X.auth.userId <-------- This should correspond to what you set later in sip.conf reg.X.auth.password <---------...

...ecause the phone has the LAN address for the Asterisk server so I don't know why it's doing DNS lookups. Phone Example: (SIP 600) Phone's Config File: reg.1.address="254" reg.1.label="x204" reg.1.type="private" reg.1.thirdPartyName="" reg.1.auth.userId="254" reg.1.auth.password="mypass" reg.1.server.1.address="192.168.0.5" reg.1.server.1.port="" reg.1.server.1.transport="DNSnaptr" reg.1.server.2.transport="DNSnaptr...

...Any help or suggestions would be greatly appreciated! Thanks, Eric Excerpt from phone3310.cfg: <reg reg.1.displayName="3310" reg.1.address="3310" reg.1.label="Line" reg.1.type="private" reg.1.lcs="" reg.1.thirdPartyName="" reg.1.auth.userId="3310" reg.1.auth.password="3310" reg.1.server.1.address="192.168.35.1" reg.1.server.1.port="5060" reg.1.server.1.transport="DNSnaptr" reg.1.server.1.expires="" reg.1...

I'm trying to figure out how to allow an extension to register more than once. For instance, I have all of these 4 line IP phones that I use with Asterisk and I would like to have a persons extension (say 101) ring at all four lines so that if the person is on the phone they can take another call, but it appears as though if you try to register the same extension more than once then the most

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the