search for: thermistor

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general indicator of my server room temperature? (...

...current Processor Fan speed is about 2906 RPMs. It _did_ click loudly once and then appeared to pick back up. Attempts to run the test aren't yielding any high spin up/down noises like I'm used to hearing from other systems. Current thermal readings (inside of the diagnostics screen): CPU Thermistor: 65C Ambient Thermistor: 27 C SODIMM Thermistor: 39 C Video Thermistor: 54 C Back on the topic of the diagnostics, I'm running a CPU stress test and the CPU Thermistor has grown to 69 C. After some time the fan speed has finally increased to 3257 RPM and I can finally clearly hear that it is...

On 6/15/2015 2:04 PM, Jim Perrin wrote: > I use a dell e6420 as my daily laptop/workstation. It stays docked and > on 24/7 while at home, often running multiple vms or docker containers. > I've not experienced what you have described. The laptop does get a > little warm during certain video conference meetings, I do not have any > thermal shutdown events. I would check for fan

...for converting HID read values to real values */ +static const float vin_scale = 0.03545 * 100; +static const float vout_scale = 0.02571 * 100; +static const float vbat_scale = 0.00857 * 100; +static const float ccharge_scale = 0.8274 / 10; +static const float cdischarge_scale = 16.113 / 10; + +/* Thermistor table used for temperature lookups + * taken from the windows monitoring application + */ +static unsigned int therm_tbl[] = +{ + (unsigned int)0x31, + (unsigned int)0x40, + (unsigned int)0x53, + (unsigned int)0x68, + (unsigned int)0x82, + (unsigned int)0xA0, + (unsigned int)0xC3, + (unsigned in...

...= +1.66 V, max = +0.82 V) ALARM fan1: 0 RPM (min = 10227 RPM, div = 2) ALARM fan2: 0 RPM (min = 6250 RPM, div = 2) ALARM fan3: 0 RPM (min = 2789 RPM, div = 2) ALARM temp1: +41?C (high = -54?C, hyst = -54?C) sensor = thermistor ALARM temp2: +43.0?C (high = +80?C, hyst = +75?C) sensor = thermistor temp3: +45.5?C (high = +80?C, hyst = +75?C) sensor = thermistor vid: +0.000 V (VRM Version 0.0) alarms: beep_enable: Sound alarm enabled -------------- next part -------------- An HTML atta...

...ght group of settings. It is definately a bit intimidating. So, is there any other software already written or in use for hardware monitoring that does not require a PhD to set up? The current sensors displays both the ISA and smbus readings, but none are even remotely close. The board uses thermistors for temp, which is mainly what I want to monitor. -- Snowman

I am using the Akima interpolation package to generate an interpolated color contour plot. It is working very well, except for one problem. The data that I have represents real-time readings from a thermistor string vs. time, so the data points are often very nearly in a rectangular array, since the thermistors are read at regular time intervals and they are equally spaced physically. However, readings are sometimes delayed or missed, so I cannot assume that it will be a regular grid. Hence Akima...

...in = +4.76 V, max = +5.24 V) ALARM VBat: +4.08 V fan1: 2556 RPM (min = 0 RPM, div = 8) fan2: 2083 RPM (min = 3013 RPM, div = 8) ALARM fan3: 1591 RPM (min = 3013 RPM, div = 8) ALARM M/B Temp: +30?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +26?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +57?C (low = +15?C, high = +45?C) sensor = diode That -12v at -15.70 is pretty obviously wrong, as is the -5 at -8.10, and the other voltages getting ALARMs are probably wrong too, though not b...

I downloaded and installed acpitool when I run it I get Battery Status <not available> AC Adapter <not availble> Thermal Info <not available> I was trying to find out how hot the CPU is? Any ideas how to get this information? THanks, jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I'm running FreeBSD 8.3-stable on a machine with an AMD A8-5600K cpu. tingo at kg-quiet$ uname -a FreeBSD kg-quiet.kg4.no 8.3-STABLE FreeBSD 8.3-STABLE #2: Fri Jan 4 19:18:15 CET 2013 root at kg-quiet.kg4.no:/usr/obj/usr/src/sys/GENERIC amd64 tingo at kg-quiet$ dmesg | grep CPU | head -1 CPU: AMD A8-5600K APU with Radeon(tm) HD Graphics (3618.02-MHz K8-class CPU)

Hi, Digium's E400P has RJ45 conector and my E1 link has BNC concetor. Could someone tell me the cable pinouts to make this conection? thanks Eduardo

Hello, Somewhat off-topic, but seeking some input from other tech folk on this list. I have a Tripp-Lite SMART 2200 (a white tower that looks similar to, but predates the black SMART2200NET) that just failed its monthly battery test so I bought new batteries and replaced the old ones. Sadly once put back together, plugged in and enabled it did not power up--no lights, sounds, smoke, etc. I took