search for: testup

Well I just need to monitor the UPS battery for testing and I do about 10 UPS's a day. So having to restart my computer every time gets old real quick. -----Original Message----- From: Rob Crittenden [mailto:rcrit at greyoak.com] Sent: Monday, December 07, 2015 11:49 AM To: Marks, Connor; nut-upsdev at lists.alioth.debian.org Subject: Re: [Nut-upsdev] Stopping Machine powering off On

...ing nut-client (upsmon) at all? upsc > (to see the output of the ups) requires nut-server only. > > Or, if you really want upsmon: > - Set up a dummy ups _and_ the ups to be tested. > - in upsmon.conf set > MONITOR dummyups at localhost 1 monmaster masterpass master > MONITOR testups at localhost 0 monmaster masterpass master > and > MINSUPPLIES 1 > > That way the dummy ups will "power your computer" and the testups will > supply 0 power so its power outage gets ignored. To simplify, you could eliminate "dummyups" and use "MINSUPPLIES...

Yes I do have Linux. I have assigned the ups.conf file as seen below.. [testups] Driver = usbhid-ups Port = /dev/ttyUSB0 When I try to start the ups driver I get the following error... $ sudo upsdrvctl start Network Ups Tools - UPS driver controller 2.7.1 Network Ups Tools - Generic HID driver 0.38 (2.7.1) USB communication driver 0.32 No matching HID UPS found Driver fa...

...ther investigations I find that /dev/usb/hiddev0 has now been deleted (including the directory /dev/usb) Re-boot is necessary. Run lsusb & HP 1000 is found Change permissions on /dev/usb to full read/write access & the same to /dev/usb/hiddev0 Tried: ./lib/nut/usbhid-ups -DDD -u root -a testups I get a summary of: ====================== Checking device (03F0/1F08) (003/003) - Vendor ID: 03f0 -Product ID: 1f08 - Manufacturer: Hewlett Packard -Product: T1000 INTL -Serial No: 2CJ8etc -Bus: 003 Trying to match device Device matches Failed to claim usb device: could not claim interface 0: De...

...In that case - what about not starting nut-client (upsmon) at all? upsc (to see the output of the ups) requires nut-server only. Or, if you really want upsmon: - Set up a dummy ups _and_ the ups to be tested. - in upsmon.conf set MONITOR dummyups at localhost 1 monmaster masterpass master MONITOR testups at localhost 0 monmaster masterpass master and MINSUPPLIES 1 That way the dummy ups will "power your computer" and the testups will supply 0 power so its power outage gets ignored. CU, Gernot

tisdagen den 1 december 2015 09.14.59 skrev Marks, Connor: Hi Marks. > Yes I do have Linux. I have assigned the ups.conf file as seen below.. > > [testups] > Driver = usbhid-ups > Port = /dev/ttyUSB0 > You need to change the driver to mge-shut (hid over serial). Regards Kjell Claesson

Hi, am 7 Dez schrieb Charles Lepple: >> MONITOR dummyups at localhost 1 monmaster masterpass master >> MONITOR testups at localhost 0 monmaster masterpass master >> MINSUPPLIES 1 > To simplify, you could eliminate "dummyups" and use "MINSUPPLIES 0". Maybe there's a bug. To monitor an UPS wich doesn't supply power to a raspi I used: MONITOR usv1vr at localhost 0 monmaster XXXXX...

Hello All, I am trying to read my Eaton 5P 1550 with the Rs-232 port but I cannot get nut to read the driver from my Rs-232 to USB adaptor. When I perform lsusb -t it says my B&B electronics adaptor uses driver ftdi_sio How do I get the nut to read information coming from that?? Thanks, Connor -------------- next part -------------- An HTML attachment was scrubbed... URL: