search for: termtyp

...; 48-62 etc\zaptel.conf # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" # span=3,3,0,ccs,hdb3 # termtype: te # bchan=63-77,79-93 # dchan=78 # Span 4:...

...ntries like "pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2" This happens on a regular basis and the E1 becomes up after some time. My zaptel.conf is as follows: # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 hardhdlc=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 hardhdlc=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" span=3,3,0,ccs,hdb3 # termtype: te bchan=63-77,79-93 hardhdlc=78 # Span 4: TE4/0/4 &q...

Dear, I always had one E1 card with one span, so I've never had any problem in set it up through /etc/dahdi/sustem.conf and /etc/asterisk/chan_dahdi.conf because I put span=1. But now I have a PBX with two E1 cards with 4 span (8 span in total). How do I have to define both card in system.conf and chan_dahdi.conf, and how do I have to refer each span to the corresponding card ??? Thanks a

...; 48-62 etc\zaptel.conf # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" # span=3,3,0,ccs,hdb3 # termtype: te # bchan=63-77,79-93 # dchan=78 # Span 4:...

...greatly appreciated. We are running Fedora 7. Kernel "Linux 2.6.21-1.3194.fc7 #1 SMP i686 i686 i386 GNU/Linux" (Standard Kernel with install) Device has jumpers all set to TE mode. /etc/init.d/zaptel.conf # Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" span=1,1,1,ccs,ami # termtype: te bchan=1-2 dchan=3 # Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" span=2,2,1,ccs,ami # termtype: te bchan=4-5 dchan=6 # Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" span=3,3,1,ccs,ami # termtype: te bchan=7-8 dchan=9 # Span 4: XBUS-00/XPD-18 "Xorcom XPD #0/2...

...ogenerated by /usr/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: ztqoz/1/1 "quadBRI PCI ISDN Card 1 Span 1 [TE] (cardID 0)" (MASTER) span=1,1,3,ccs,ami # termtype: te bchan=1-2 dchan=3 # Span 2: ztqoz/1/2 "quadBRI PCI ISDN Card 1 Span 2 [TE] (cardID 0)" span=2,2,0,ccs,ami # termtype: te bchan=4-5 dchan=6 # Span 3: ztqoz/1/3 "quadBRI PCI ISDN Card 1 Span 3 [TE] (cardID 0)" span=3,3,0,ccs,ami # termtype: te bchan=7-8 dchan=9 # Span 4:...

...1 /etc/zaptel.conf # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" span=1,1,1,ccs,ami # termtype: te bchan=1-2 dchan=3 # Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" span=2,2,1,ccs,ami # termtype: te bchan=4-5 dchan=6 # Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" span=3,3,1,ccs,ami # termtype: te bchan=7-8 dchan=9 # Span 4: XBUS-00/XPD-18 "Xorcom XPD #...

...1 context = default group = 63 /etc/asterisk/system.conf (like zaptel.conf) # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" AMI/CCS RED span=1,1,0,ccs,ami # termtype: te bchan=1-2 dchan=3 echocanceller=mg2,1-2 # Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED span=2,2,0,ccs,ami # termtype: te bchan=4-5 dchan=6 echocanceller=mg2,4-5 # Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS RED span=3,3,0,ccs,ami # termtype:...

...ext=trunk_7_0 language=fr channel => 8-9 ;; Span 4: B4/0/3 "B4XXP (PCI) Card 0 Span 3" signalling=bri_cpe callerid=asreceived group=7 context=trunk_9_0 language=fr channel => 11-12 /etc/dahdi/system.conf # Span 2: B4/0/1 "B4XXP (PCI) Card 0 Span 1" span=2,1,0,ccs,ami # termtype: te bchan=5-6 hardhdlc=7 echocanceller=mg2,5-6 # Span 3: B4/0/2 "B4XXP (PCI) Card 0 Span 2" span=3,2,0,ccs,ami # termtype: te bchan=8-9 hardhdlc=10 echocanceller=mg2,8-9 # Span 4: B4/0/3 "B4XXP (PCI) Card 0 Span 3" span=4,3,0,ccs,ami # termtype: te bchan=11-12 hardhdlc=13 ech...

...it this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED span=1,1,0,cas,hdb3,crc4 # termtype: te #bchan=1-15,17-31 #dchan=16 cas=1-15:1101 dchan=16 cas=17-31:1101 echocanceller=mg2,1-15,17-31 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED span=2,2,0,ccs,hdb3,crc4 # termtype: te bchan=32-46,48-62 dchan=47 echocanceller=mg2,32-46,48-62 # Span 3:...

...starting link PRI Span: 1 TEI=0 Sending SABME PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment) PRI Span: 1 TEI=0 Sending SABME Below you can find the /etc/dahdi/system.conf # Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS RED span=1,0,0,ccs,ami # termtype: nt bchan=1-2 hardhdlc=3 echocanceller=mg2,1-2 # Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED span=2,0,0,ccs,ami # termtype: nt bchan=4-5 hardhdlc=6 echocanceller=mg2,4-5 # Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS RED span=3,1,0,ccs,ami # termtype: te bcha...

...Jun 16 22:49:10 2010 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,ami # termtype: te bchan=1-2 hardhdlc=3 echocanceller=mg2,1-2 # Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED span=2,2,0,ccs,ami # termtype: te bchan=4-5 hardhdlc=6 echocanceller=mg2,4-5 # Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" RED span=3,3,0,ccs,ami # termtype: te bchan=7-8 hardhdlc=9 e...

Hi All: It appears that the terminfo ansi-m file is no longer distributed with the CentOS 6.2 (along with many others). Can anyone advise how I can obtain this file? As a work around I have copied the file from a CentOS 4 box but that is probably not the "proper" way to do it. TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

On Sat, Jan 17, 2015 at 09:31:33AM +0100, Bertrand LUPART - Linkeo.com wrote: > >>> However, dahdi_genconf keeps finding no span: > >>> What am i missing? > >> > >> It looks like your driver is loaded correctly. My guess would be maybe > >> the dahdi-tools is packaged as an older version that doesn't know > >> about the newer te435

...Jun 16 22:49:10 2010 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,ami # termtype: te bchan=1-2 hardhdlc=3 echocanceller=mg2,1-2 # Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED span=2,2,0,ccs,ami # termtype: te bchan=4-5 hardhdlc=6 echocanceller=mg2,4-5 # Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" RED span=3,3,0,ccs,ami # termtype: te bchan=7-8 hardhdlc=9 e...

...16 as D-channel anyway! My card is a D410P configured for E1, only the first span is configured, and configuration snippets are as follows: From /etc/dahdi/system.conf: (auto configured, first span only shown:) # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 ---------------------------------------------------------------------- From /etc/asterisk/dahdi-channels.conf (included in chan_dahdi.conf): ; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" group=0,11 context=from-pstn switchtype...

...ystem.conf # Autogenerated by /usr/sbin/dahdi_genconf on Tue May 19 17:37:11 2009 -- do not hand edit # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource span=1,1,0,esf,b8zs # termtype: te bchan=1-23 dchan=24 echocanceller=mg2,1-23 # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" B8ZS/ESF RED span=2,2,0,esf,b8zs # termtype: te bchan=25-47 dchan=48 echocanceller=mg2,25-47 # Global data loadzone = us defaultzone = us geriatrix ~ # lsmod Module...

...prefix=00 nationalprefix=0 overlapdial=no ;Sangoma A101 port 1 [slot:5 bus:3 span:1] <wanpipe1> switchtype=euroisdn echocancel=yes signalling=pri_cpe channel =>1-15,17-31 /etc/dahdi/system.conf: # Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS/CRC4 span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 hardhdlc=16 # Global data loadzone = de defaultzone = de Any hints? Thanks! Regards, Bjoern

...15:31:24 2009 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" span=2,2,0,ccs,hdb3,crc4 # termtype: te bchan=32-46,48-62 dchan=47 echocanceller=mg2,32-46,48-62 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" span=3,3,0,ccs,hdb3,crc4 # t...

...he switch side but here is my setup. Can anyone point me in the right direction? # dahdi_hardware pci:0000:06:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen) /etc/dahdi/system.conf # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource span=1,1,0,esf,b8zs # termtype: unknown bchan=1-23 dchan=24 echocanceller=mg2,1-23 /etc/asterisk/chan_dahdi [channels] language=en context=Incoming-Pri switchtype=dms100 signalling=pri_cpe group=1 channel => 1-23 Thanks, Eric Merkel