search for: te207p

New never used bought by mistake ( 5V pci slot ) and stored... pls make offer, thanks and regards, Jean-louis Curty The TE207P is a bundling of our leading TE205P product and our new VPMOCT064 Octasic DSP-based echo cancellation module. The TE207P is Digium's and the industry's first two-port digital card featuring hardware-based echo cancellation. The new module enables users to eliminate echo tails up to 128ms or...

I need help on my zaptel.conf and Zapata.conf for a TE207P I'd like Span 1 to receive a PRI from the phone company(US PRI). I'd like Span 2 to interface with a Nortel Phone system as a PRI(acting as the phone company) Essentially my asterisk box is a man in the middle intercepting calls from the PRI passing certain DID to the Nortel, also interc...

Hi all, I'd like to setup a really lean Asterisk installation that essentially has a full ISDN PRI (AT&T, T1, 23 B-chans, 1 D-chan, BZ8S, 5ESS, National dialplan) on a Digium TE207P adapter that all it does is convert the ISDN channels to SIP/IAX channels. Then I would add this Asterisk 'gateway' as a provider on one (or many) Asterisk systems on the back. With such a config I don't need anything like Voicemails, mailboxes, etc... All I want it to do is accept c...

Would anyone care to recommend a T1 interface method for Asterisk that would function as an (external) alternative to a PCI card like the Digium TE120P? Like some sort of T1-SIP gateway? Also, would anyone with experience using these products care to comment on the practical value of the TE207P vs. the TE205P? -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3221 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070501/1158884c/smime.bin

...s. The question is, would it be more reliable to offload all dahdi/zaptel/libpri type stuff to a dedicated gateway device (Asterisk or Cisco) and have the Asterisk PBX only process SIP/IAX? What prompted all this was terrible call quality/dropped calls over our PRI (which currently has a Wildcard TE207P PCI card) and after two weeks of searching I think I've finally found the issue today (Serial ATA vs Auto mode in the BIOS, would you believe which leads us to believe that offloading duties would be very beneficial performance-wise!). I can think of the gateway allowing us to have multiple PB...

Hi @ all, i set a server to a costumer of mine with a TE207P for use with 2 E1 Lines. I set them together into one group in zaptel/zapata.conf The point is now, the customer has a free-volumina of 60k minutes per month, per line. How can i make a kind of load balancing, that both lines will be trafficed the same way ? I read something about DIAL(Za...

Hi I am not sure why this is happening or whether it has anything to do with my iaxmodem setup. When receiving a fax via iaxmodem, I got an error message saying *chan_iax2.c:7542 socket_process: Call rejected by 127.0.0.1: Busy*

...ome helpful tips. We're basically getting glitching on the line, and in the error logs it's showing: chan_dahdi.c: PRI got event: HDLC Bad FCS We're running our PBX on the recommended PDSMA+ motherboard (so timing should have been tested), and we've tried two different Wildcards (TE207P). We've tried removing the hardware echo canceler. We've tried moving the card to different slots. We've tried an entirely different system (Dell SC400 tower - unsupported, I know, but I wanted to get a comparison). AT&T have tested the line (although I'm getting them onsite...

Sorry for this. This is most likely a HOWTO or FAQ question, but it's so much information and documentation to wade through so I hope someone could take a minute to answer anyway. If not, no worries. I'll get to it sooner or later :) I'm trying to understand what Asterisk actually is and the basic workings... I think I've understand what I need to get going, except one thing.