search for: tdm400ps

...ed some clarification. I would like to setup a SOHO for business and home use. Scenario One: I have one analog line, 4 analog telephones. Do I need a TDM400P + 4 FXS modules (Green) + X100P? Scenario Two: 2 analog lines, 1 selective ring number for fax, 8 analog phones. Is this what I need? 2 TDM400Ps and 8 FXS for 8 phones 2 X100Ps for 2 lines or maybe: 3 TDM400Ps and 8 FXS and two FX0 modules (Red) Thank you, Jeff Borders

List members, Is it possible to record outbound analog calls using an X100P? I was asked if I knew how to record all calls for a shop with 4 analog phones transparently to the end users. I thought Asterisk was a good fit for this and I envisioned using either Digium TDM400Ps or Sangoma A200s with 4 FXO and 4 FXS modules. The FXO modules would be connected to the existing PBX and the FXS modules to the existing analog phones. Then with a simple dialplan, all inbound and outbound calls could be recorded by Monitor. I wanted to mock this up using some X100Ps that I...

...do this? I'm going to put together a new machine now and I'm having trouble picking a motherboard for it (ordering from Dell or other online vendor is not an option, since I need this in the next couple days). This is to provide another avenue for avoiding IRQ conflicts with the Digium TDM400Ps. Thanks! Jen

Since the irc channel wasn't any help, I will try posting my problem here. I have two TDM400Ps less than a week old in a PC. All of the FXS ports work fine, and all of the FXO ports worked fine up until thisafternoon. If I try to dial in, I get a busy signal, if I try to dial out, all I hear is a very scratchy, very crackly dialtone. If I swap the first FXO module with the second on the card...

Hi all, Theoretically, I know it's possible, but is any using multiple tdm400ps (fxo) in single * box? In a production environment? Any gotchas aside form irq sharing? Thanks Ryan

Hi all, haven't seen many posts about asterisk in Singapore... Getting a server going there and was wondering if TDM400Ps will be fine in FCC mode, and if there are indications / cadence values that I should be putting on there as in other international locations. Seen an unsettling post on voip-info about Singapore issues with Call Polarity/Hangup Detection -- crossing my fingers I don't run into that problem :-...

Hello list... 1) Is there an IAX softphone that supports any kind of voicemail indicator? 2) I have 2 TDM400Ps installed in a system. I need the audio on the analog phone (FXS modules) to be amplified somewhere between 10 and 15db so I set rxgain and txgain to 15 for the FXO interfaces and FXS interfaces. When a call comes in on the FXO at this setting, the call sometimes has about 20 seconds of loud noise...

...y 2-wire FXS (is that correct terminology?) to the existing jacks, can I use the T100P with (Z-Plex 10? model A or B?) and have 8 FXO and 16 FXS? I think so, but the developer's kit only references FXS.... c. Or must I buy more equipment, e.g. 4 X100P's + 4 TDM400Ps?. d. Are there other combinations worth considering? e. Others to be avoided? 2. To prevent disruption to the rest of the household, I would like start out with the *PBX behind the KXT -- i.e. the *PBX's CO lines are actually extensions on the KXT. In this situation, is th...

...at paid and are waiting. But if you want to receive your new board *very soon* you can call Greg or Malcolm at 256-428-6262 and ask them to ship you the board along with the new orders. If you're not in a hurry we will proceed soon with the list of people that reported the problems with their TDM400Ps before. regards Martin

Hi I have previously had good success on smaller installations with TDM400P cards. I now have a UK customer looking for 8-10+ lines and it seems like a PRI would be most economical + reliable? Has anyone here used PRI interfaces in the UK and can confirm that it works well (using Trixbox for preference?). I have had some niggling issues with the TDM400P cards which puts me off adding lots

Hello, I have an asterisk 1.2.18 working fine, the only problem is that all applications that play audio, sound like "tremolo" or "vibrato", but musiconhold plays fine. The same audio file (wav, mp3, ...) works fine with Musiconhold() but not with Playback() or Background()... If I move app_playback.so from this system to another asterisk, playback works fine... Do you

Hello. I've seen several posts talking about line quality using Digium cards that are sharing IRQs or on machines where X is running but after trying all of those fixes I am still having a problem with line static on outoing calls. BTW, calls that are from one extension to another extension have no static, however, they have occasional clicks and pops. At any rate, I was wondering if

I have a client who wants a Meetme box with 12 FXO ports, to connect to Analogue lines coming from an Ericsson PBX. It looks like I could do this with four different hardware configurations: a) three TDM04B cards (based on TDM400P) b) one TDM04B and one TDM808B c) one TDM804B (or TDM854B?) and one TDP808B d) one TDM2403B (half filled TDM2400P) Apart from considerations of cost and PCI slot