search for: tcdevic

Version 3.0.5 with the two-devices setup (eth0 - net, eth1 - loc). Kernel 2.4.29 tcdevices, tcrules, and tcclasses are clones of the wondershaper example (http://www.shorewall.net/traffic_shaping.htm) with eth0 replacing ppp. With TC_ENABLED=Internal in shorewall.conf: ---- Validating /etc/shorewall/tcdevices... Validating /etc/shorewall/tcclasses... ERROR: device A seems not to b...

...icated public IP and force the traffic from this dedicated public IP to go to Asterisk server (with IP filtering for security). This works too. Now, my problem is to put QoS (using TC_ENABLED=Internal). I try many configuration but always have the same problem: once the isp1 interface is listed in tcdevices, we have poor download speed. Even with/without other TC configuration. Here is our tcdevices file: ======================== #NUMBER: IN-BANDWITH OUT-BANDWIDTH OPTIONS REDIRECTED #INTERFACE INTERFACES 1:isp1 10240kbit 10240kbit ======================== We use an external server to test...

Hi, I''m trying to configure QOS , but I''m don''t have success. My files: #/etc/shorewall/tcdevices #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 256kbit 256kbit eth1 256kbit 256kbit eth2 256kbit 256kbit #/etc/shorewall/tcclasses #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth1 1 256...

...add dev eth2 parent ffff: protocol ip \ u32 match u32 0 0 action mirred egress redirect dev ifb0 And then we can use 'tcrules' and 'tcclasses' for configuration egress discipline of the 'ifb0' interface as usually. I think that we can add yet one column in 'tcdevices' for such devices as 'ifb' for define list of interfaces whose traffic we want to redirect to it. May be so: #INTERFACE IN-BANDWITH OUT-BANDWIDTH REDIRECTED # INTERFACES ifb0 1mbit 512kbit eth2,eth4...

...sion 4.0.15 on Debian Lenny. I have 3 following interfaces: eth0 net (4mbit/512kbit) eth1 loc (100mbit) eth2 loc (100mbit) I want to shape traffic from net on two lan interfaces like: - default is 2000mbit for each local interface - if is no traffic on eth1 is 4mbit for eth2 (and vice versa) My tcdevices eth0 4000mbit 512kbit eth1 - 100mbit eth2 - 100mbit Class is assigned to the interface and my question is, is it possible to assign a common class for eth1 and eth2? How should look a class for eth1 and eth2? eth1 1...

Hi, I am trying to do the simplest configuration of traffic shaping. So I did: shorewall.conf TC_ENABLED=Simple tcinterfaces eth0.2 External 500kbit tcdevices eth0.2 500kbit 200kbit And I am testing the speed on that interface - whether I did it ok or not, and my speed is still 4mbit/512kbit. So the question is - How to reduce the speed on interface connected to the Internet? kind regards Bartosz. ---------------------------------...

...thing (99%) seems to be in the default queue, occasionally something shows up in the "Mark 2 queue" Queue 1 and 4 are never used. I am running a 2.6.24 kernel, on a USparc1 using debian testing and I have attached a shorewall dump. I have created the following tcrules, tcclasses, and tcdevices files. tcrules #MARK SOURCE DEST PROTO PORT(S) CLIENT USER TEST # PORT(S) #VoIP 1 192.168.0.62 0.0.0.0/0 tcp 4569,5060,5061 1 192.168.0.62 0.0.0.0/0 tcp - 4569,5060,5061 1 192.168.0.62 0.0...

All of a sudden tonight my web browsing and ssh performance is terrible. I''m on a cable connection and I''m wondering if it could be due to evening bandwidth contention or ISP throttling. If so, I suppose tcdevices numbers are out the window. Can anything be done? - Grant ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword

I try use setup traffic shaping with Shorewall-4.0.2 and have fault. When i start Shorewall with tc-files configured i get follow messages: ... RTNETLINK answers: No such file or directory We have an error talking to the kernel ERROR: Command "tc filter add dev eth2 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 500kbit burst 10k drop flowid :1" Failed

Hi folks, I''m having an issue with rsync between my firewall and an internal box. It seems to be a shorewall issue (or correctly speaking, an issue with my shorewall config) because if I disable shorewall my rsync works fine. And I just can''t find it documented anywhere what I need to do. I have rules like this : root@userver:/etc/shorewall# grep -i Rsync rules

Hi i don''t understand if i can add Trafic Shaping on a Alias ... I have a lot of Interface with Vlan and i want add QoS on ... i have put into tcdevices: eth1.2002 1900kbit 1900kbit eth1.2003 1900kbit 1900kbit eth1.2004 1900kbit 1900kbit eth1.2005 1900kbit 1900kbit but after i have read this: You may NOT specify the name of an alias (e.g., eth0:0) What is the solution ? Thanks bye ------------------...

...ipp2p:all ipp2p This did seem to stop bittorrent but not ares. So first question: is this the correct rule? Has some one successfully done this before? My second attempt was to at least make the use of p2p frustratingly slow. I seemed to have better results. Below are my tcrules, tcclasses, and tcdevices files. tcrules #MARK SOURCE DEST PROTO PORT(S) CLIENT USER TEST LENGTH TOS # PORT(S) 5 0.0.0.0/0 0.0.0.0/0 icmp echo-request 5 0.0.0.0/0 0.0.0.0/0 icmp echo-reply RESTORE 0.0.0.0/0 0.0.0.0/0 all - - - 0 CONTINUE 0.0.0.0/0 0.0.0.0/0 all - - - !0 7 0.0.0.0/0 0.0.0.0/0 ipp2p:all SA...

Hello there, I can modify /etc/shorewall/tcdevices to control overall IN-BANDWITH. It is quite effective. Just change 2mbit to 128kbit. However, how do I limit download speed for a certain host IP on the LAN? I want to limit host 192.168.1.140 download speed to 128Kbit. Other hosts on the 192.168.1.0 LAN can still surf at 2mbit. Any input...

Hi i want see if my QoS are good because i am not very sure ... the VoIP quality are not very good when i download. I have on my Linux routeur/Firewall Asterisk .. and i have into my config : ================================================ tcdevices: eth0 2000kbit 2000kbit tcclasses: eth0 1 100kbit 180kbit 1 tos=0x68/0xfc,tos=0xb8/0xfc eth0 2 full/4 full 2 tcp-ack,tos-minimize-delay eth0 3 full/4 full 3 default eth0 4 full/8 full*8/10 4 tcrules: 1 $FW...

...top priority over over everything else on the LAN (mark 1), give SSH/ICMP/ACK packets the next priority (mark 2), default traffic is mark 3, and then P2P on mark 4 (I have set all my P2P programs to only use 6881-6889). There was mention of VoIP in the TCCLASSES file, but not in the TCRULES file. TCDEVICES: #INTERFACE IN-BANDWITH OUT-BANDWIDTH ppp0 1200kbit 205kbit TCCLASSES: #INTERFACE MARK RATE CEIL PRIORITY OPTIONS ppp0 1 100kbit 180kbit 1 ppp0 2 full/4 full 2 tcp-ack,tos-minimize-delay ppp0...

...Although I''ve read the documentation, I''m not sure I have this right. Can someone help? /etc/shorewall/params: MID_IF=eth0 MID_IF_TC=1 INET1_IF=eth1 INET1_IF_TC=2 INET1_IFB_IF=ifb0 INET1_IFB_TC=3 Note: MID_IF is the LAN and INET1_IF is my internet connection. /etc/shorewall/tcdevices: #NUMBER: IN-BANDWITH OUT-BANDWIDTH OPTIONS REDIRECTED #INTERFACE INTERFACES $MID_IF_TC:$MID_IF 0 1000mbit $INET1_IF_TC:$INET1_IF - 2mbit...

...elease was initially uploaded, and we wanted to avoid the confusion that would inevitabley result if we were to release a different set of code with the same version number. Problems corrected in Shorewall-perl 4.2.10.1 1) Users that set TC_ENABLED=Internal and have entries in /etc/shorewall/tcdevices and /etc/shorewall/tcclasses may experience startup error such as the following: ERROR: Command "tc qdisc add dev eth1 root handle 1: htb default 12 r2q 20.8" Failed Problems corrected in Shorewall 4.2.10 1) A ''large quantum'' warning log message...

I''m using shorewall with openvpn and traffic shaping at all of our offices. I have noticed for a while that occasionally ping times are excessive. Usually this is during overnight off site backups but some times during the day. I have assumed the is was an ISP issue but now I''m suspecting it''s problem with openvpn and traffic shaping. In the test case have 2 sites

...ly, would incorporation of ipp2p into my rules help me in any way? My kernel (gentoo) is already build to support ipp2p and I already have the module loaded and iptables is working with it. So if ipp2p would be helpful I''m already set up for it. Thanks for any help. Here are my files: tcdevices: eth1 3800kbit 800kbit tcrules: 1 0.0.0.0/0 0.0.0.0/0 icmp echo-request 1 0.0.0.0/0 0.0.0.0/0 icmp echo-reply 2 0.0.0.0/0 0.0.0.0/0 tcp - 50001:50009 2 0.0.0.0/0 0.0.0.0/0 tcp - 5...

Hello, I am trying to set up traffic shaping/control for my voip connection. I am running 4.4.22.3. Here is my current configuration: --- tcdevices --- #NUMBER: IN-BANDWITH OUT-BANDWIDTH OPTIONS REDIRECTED #INTERFACE INTERFACES eth1 2048kbps 1500kbps -- tcclasses --- #INTERFACE:CLASS MARK RATE: CEIL PRIORITY OPTIONS # DMAX:UMAX eth1 1 100kbps 180kbps 1 tos=0x88/0xfc,tos=0xb8/0xfc eth1 2 fu...