Displaying 20 results from an estimated 27 matches for "syskonnect".
2004 Dec 31
0
centos3.4beta and Getting the Marvell/Syskonnect Gigabit Nic to work
My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock
v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with
Marvell Gigabit Lan the dd is available at
http://slackpkg.ath.cx/centos/disk/sk98lin/
2004 Jun 08
1
NIC detection by anaconda
Hello all,
I'm not able to install CentOS in a motherboard with a onboard 3Com
gigabit nic (3c904/Syskonnect). Although there's a device driver for the
Syskonnect (sk98lin) in the linux kernel, the installation program is
asking for this interface module.
I tried to create a device disk, but without success.
Maybe I'm missing some information about the modules detection by the
installation.
How...
2002 Jun 22
7
bonding & vlan - kernel 2.4.18 (RHL7.3)
Hi,
Hopefully this won''t be too off-topic (I''ve seen both bonding & vlan
mentioned on the list, but not really together).
I''ve tried to get bonding (2 x 100Mb EEPro, but will want to try on
1000BaseT) and vlans to work together, but without luck. I can get them
working fine (seemingly at least - I didn''t tried bursting on the
bonded port) individually.
2003 Jan 23
2
Question to Memdisk
Hi,
I am currently working with Memdisk.
I setup a floppy disk that boots DOS and performs a VLM login into a
NetWare Server.
2005 Nov 04
4
Dom0 eth0 has different MAC address than expected, ignoring
...it.
I''m currently running FC3 and Xen2.0.7. I did the usual ''make install'' and I
can boot into Xen dom0. However, my network card is not working. The driver
is found in the linux-2.6.11.12-xen0 tree but not selected. I rebuilt the
kernel by compiling the Marvel Yukon/SysKonnect SK98xx driver both in the
kernel and as a module but to no avail.
So the error message I have is
"Device eth0 has different MAC address than expected, ignoring."
If I remove the MAC address completely either using the GUI or under
/etc/sysconfig/network-scripts/ifcfg-eth0 and
/etc/sy...
2003 Nov 28
5
[OT] Good Gigabit Ethernet Card ...
Greetings ...
I hate to ask these questions, but I dought I will get a straight
answer from an Salesmen ...
I am looking at putting gigabit in as a back bone for a few Linux
servers, but I have used an Accton Gigabit ethernet card with RedHat
8.0/9 and found it a little unstable ... do and RedHat users have a
suggestion on a good, but not expensive Gigabit card, basicly for a
Samba
2008 Dec 07
1
Dlink DGE-530T on CentOS 4.7
Has anyone had any luck getting this to work? The kernel provide skge,
sky2 and sk98lin modules all fail to load.
I was able to download the latest version from the syskonnect.de site,
and with some hacking/klduging of their install script managed to
compile the module in there (a newer version of sk98lin, it seems)
which recognised the card... but this isn't really sustainable 'cos
new kernels will cause problems.
Any ideas?
--
rgds
Stephen
2007 Oct 11
0
SK-9E21D + vlan + ifb
Hello!
Scenario: kernel 2.6.22.9, SysKonnect SK-9E21D, vlan, redirecting for
packets arriving on than vlan to ifb.
Using tcpdump on ifb iinterface I see the following:
03:30:17.322484 5a:71:6f:15:00:17 > 00:00:5a:71:00:00, ethertype Unknown
(0xcb69), length 1522:
0x0000: 2000 0800 4500 05dc 3a2f 4000 3c06 d868 ....E...:/@.<....
2006 Feb 09
1
Static problems with Asterisk + Polycom phones
...pts:
CPU0
0: 3115334 XT-PIC timer
1: 8 XT-PIC i8042
2: 0 XT-PIC cascade
5: 12453626 XT-PIC wctdm24xxp
8: 1 XT-PIC rtc
10: 93751 XT-PIC libata
11: 907892 XT-PIC SysKonnect SK-98xx, eth1
15: 111542 XT-PIC ide1
NMI: 0
LOC: 3115228
ERR: 0
MIS: 0
Any other information you need to help me figure this out, please let me
know.
- Roman
2007 Jan 09
4
Yukon Nic
He Everyone,
We found out that till version 3.02 the Yukon nic is supported after it
gives code errors, i'm working a lot with ehtherboot via drbl /
clonezilla, and together with Steven Shiau we ask you guys if you can
arrange that the Yukon can be supported again. Our thanx in advance.
Dave & Steven
2005 Jul 22
8
Latency of Linux Bridge
Hi there!
I am working a lot with VoIP in my company, so I thought to use linux bridge functionality together with tc to emulate delay, jitter, packet loss, duplication, reordering etc. for testing purposes in our lab against our VoIP products.
I just recognized, that a basic bridge just with it''s minumum configuration of 2 network interfaces creates latency of approx. 5ms on very low
2007 Apr 18
1
[Bridge] Dead loop: "bridge ended up including itself"
Hello List,
some time ago i already asked this, in the meanwhile i did
not found a solution nor i have any idea why this happens.
Scenario:
Every now and then i get this urgent warning:
1 Time(s): Dead loop on virtual device br0, fix it urgently!
Stephen Hemminger wrote (16.08.2006 20:09) this:
> It looks like a bridge ended up including itself some how.
Its for me unclear when this
2003 Jan 31
1
MEMDISK: Image seems to have fractional end cylinder
Hi,
I created a 4 Meg Byte primanry DOS patition onto a hard disk. This partition
was formatted with
format /s.
The hard drive was able to boot DOS.
After that I connected the drive to a Linux machine and created and image
with the command
dd if=/dev/had1 of=hard.img
When I send this image to my PXE client I see on the screen:
MEMLINUX: Image seems to have fractional end cylinder
MEMLINUX:
2005 Jan 02
0
Box unstable after loading zaptel drivers for X100P
...ge i8042
4: 41804 IO-APIC-edge serial
8: 2 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 66 IO-APIC-edge i8042
15: 24 IO-APIC-edge ide1
16: 5174982 IO-APIC-level 3ware Storage Controller
18: 349692696 IO-APIC-level SysKonnect SK-98xx, eth1
19: 421707 IO-APIC-level wcfxo
NMI: 0
LOC: 46448330
ERR: 0
MIS: 86
The box is rock solid when I unload wxfxo and zaptel, no matter what load
i put on it I cannot bring it down. When loading zaptel and wcfxo the box
will completely freeze when th...
2005 Jan 06
0
FreeBSD 5.3-RELEASE Errata Notice: FreeBSD-EN-05:02.sk
...ems
Category: core
Module: sys_pci
Announced: 2005-01-06
Credits: Peter Edwards, John-Mark Gurney, David O'Brien, Bjoern A. Zeeb
Affects: FreeBSD 5.3-RELEASE
Corrected: 2005-01-06 17:54:47 UTC
I. Background
The sk(4) network driver provides support for SysKonnect-based Gigabit
Ethernet adapters.
II. Problem Description
Several programming errors were discovered in the sk(4) network driver,
including an off-by-one error and a missing lock.
III. Impact
FreeBSD symmetric multiprocessing (SMP) systems using the sk(4) network
driver may experience data corr...
2006 Feb 27
3
sk98lin Gigabit Ethernet
Is anyone using sk98lin Gigabit Ethernet adapters under CentOS 4.x?
The version of the driver that ships with CentOS 4.x kernels was too
old to support the onboard NICs on some Intel server boards that we
recently got, so we installed a newer driver using DKMS. However,
we're having problems finding a stable driver to use: the first
version that we tried (7.09) gave a kernel panic when I ran
2002 Jul 22
1
XP client awfully slow
Hi all,
please excuse my posting what is probably an FAQ, but getting the mail
archives is excruciatingly slow (~70 bytes/sec).
I have an XP professional box attached to a Samba server. It works
ok-ish (I can actually access everything) but everything is painfully
slow. Attaching a network drive takes at least 10 seconds, sometimes
longer. Word takes AGES to load (> 15 seconds before anything
2003 Dec 15
4
Samba Variables and TCP/IP Throughput
Hi,
I am trying to optimize my gigabit network. I have two Intel 1000 MT Gigabit
Server Adapters, which support Jumbo Frames -- as well as a Switch that
supports Jumbo Frames. However, I am observing some strange behavior in my file
transfers from Windows XP to Linux and I am wondering if it has anything to do
with the way the Samba variables are set on my Linux box?
The "strange
2009 Apr 08
1
watchdog timeout
...Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast
Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit
Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet
Networking
device pcn # AMD Am79C97x PCI 10/100(precedence over
'lnc')
device re #...
2005 Jan 10
3
FXO PCI Master abort
...ge i8042
4: 68502 IO-APIC-edge serial
8: 2 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 66 IO-APIC-edge i8042
15: 24 IO-APIC-edge ide1
16: 716211 IO-APIC-level 3ware Storage Controller
18: 14610651 IO-APIC-level SysKonnect SK-98xx, eth1
19: 100191376 IO-APIC-level wcfxo
NMI: 0
LOC: 100225869
ERR: 0
MIS: 0
cat /proc/version
Linux version 2.6.9-gentoo-r13 (root@) (gcc version 3.3.4 20040623
(Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Sun Jan 2 23:28:22 CET
2005
Thanks!
Rem...