search for: symbios

Displaying 20 results from an estimated 157 matches for "symbios".

2012 Jul 27
1
RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal
2006 Sep 01
0
Driver for Symbios 8100S PCI SCSI?
I'm trying to install CentOS 3 on an OmniBook 800. (Am I insane?) The bootdisk.img gets things started just fine, but the closest driver on the drvblock.img disk is for the Symbios 53C896, and the Omnibook has a 53C810. Manually choosing the Symbios driver seems to discover scd0, but it's not able to load CentOS from the CD. (I've tried both the boot.iso from the os/i386/images directory, and Disk 1 from the regular set of install ISOs.) Any suggestions? Am I just...
2002 Jun 02
1
PATCH for Symbios/LSIlogic scsi and isolinux
Attached patch allows isolinux to boot from a CDROM attached to a NCR/Symbios/LSIlogic SCSI controller (bios version 4.19). It appears this bios can't read more than 1 sector at the time using the ah=42h int13 call. The isolinux boot was failing early on when 4 sector are read. (bios returned error 0 !) I'm not sure if the same 'getlinsec' routine is calle...
2017 Apr 29
2
SCSI drives and Centos 7
...is wrote: > I am remote from the unit today, and do not have a good way to look at > the board today, but the contents of /proc/scsi/scsi is : what does `lspci` have to say about this raid card ? John, Thanks for the prompt : lspci demonstrates : 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) Greg
2018 Jul 10
2
Semi-OT: LSI raid card sorta....
...RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078 PCI-Express Fusion-MPT SAS (rev 04) 42:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02) 43:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) I've connected a RAID box that we had...
2017 Apr 30
2
SCSI drives and Centos 7
...CSI drives and Centos 7 Date: Sat, 29 Apr 2017 13:31:11 -0700 On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) could you try `lspci -nn`, this will return the vendor/device ID, which will pin down which megaraid it is. but, I'm afraid the...
2018 Jul 10
1
Semi-OT: LSI raid card sorta....
...additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see the others. I *know* the new card is a MegaRAID - the box it came in >> says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / >> Symbios Logic SAS1078 PCI-Express >> Fusion-MPT SAS (rev 04) >> 42:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 >> [Invader] (rev 02) >> 43:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic >> SAS3008 >> PCI-Express Fusio...
2006 Feb 08
0
Poweredge 2850 with LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be
2017 Jun 20
2
Re: virtual drive performance
2017 Jun 21
2
Re: virtual drive performance
...#39;0' unit='0'/> > > </disk> > > > > Do you see any gotchas in this configuration that could prevent the > > virtualized guest to power on and boot up? > > > > > When I configure like this, from a linux guest point of view I get this > Symbios Logic SCSI Controller: > 00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a > > But htis is true only if you add the SCSI controller too, not only the disk > definition. > In my case > > <controller type='scsi' index='0'> > &...
2008 May 08
0
total server lock-up during CentOS5.1 installation with vnc
...e: Broadcom OSB4 South Bridge (rev 4d) 00:11.0 Host bridge: Broadcom CNB20-LE Host Bridge (rev 04) 00:11.1 Host bridge: Broadcom CNB20-LE Host Bridge (rev 02) 01:00.0 Mass storage controller: Compaq Computer Corporation Smart-2/P RAID Controller (rev 03) 02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 02:04.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 02:08.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 100 (rev 05) Srv2: # lspci 00:00.0 Host bridge: Broadcom CNB20-LE Host Bridge (rev 04) 00:00.1 Host bridge: Broadcom CNB20-LE Host...
2017 Jun 20
0
Re: virtual drive performance
...ler='0' bus='0' target='0' unit='0'/> > </disk> > > Do you see any gotchas in this configuration that could prevent the > virtualized guest to power on and boot up? > > When I configure like this, from a linux guest point of view I get this Symbios Logic SCSI Controller: 00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a But htis is true only if you add the SCSI controller too, not only the disk definition. In my case <controller type='scsi' index='0'> <address type='pci' domain=...
2017 Apr 29
0
SCSI drives and Centos 7
On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) could you try `lspci -nn`, this will return the vendor/device ID, which will pin down which megaraid it is. but, I'm afraid the...
2018 Jul 10
0
Semi-OT: LSI raid card sorta....
...I just installed a new, additional RAID card, > all LSI. > > MegaCli64 only sees one controller. I can't seem to find the magic to see > the others. I *know* the new card is a MegaRAID - the box it came in says > so. The system sees it > 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078 PCI-Express > Fusion-MPT SAS (rev 04) > 42:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 > [Invader] (rev 02) > 43:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3008 > PCI-Express Fusion-MPT SAS-3 (rev 02) > > I'v...
2005 Jun 28
1
U320 PCI-X SCSI HBA experiences on x86_64
Does anyone have any good or bad driver/performance/stability experiences with either: LSI Logic LSIU320 Adaptec 29320ALP-R or (or other current boards using the same driver) in Opteron servers running RHEL 4 or CentOS 4, x86_64? Thanks in advance. -- Inside every older person is a younger person wondering what happened
2017 Jul 02
3
Re: virtual drive performance
...t; > > >> > > Do you see any gotchas in this configuration that could prevent the >> > > virtualized guest to power on and boot up? >> > > >> > > >> > When I configure like this, from a linux guest point of view I get this >> > Symbios Logic SCSI Controller: >> > 00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a >> > >> > But htis is true only if you add the SCSI controller too, not only the >> disk >> > definition. >> > In my case >> > >> >...
2016 Jul 26
2
CentOS 6 and an SAS drive, hardware
This is... odd. Got a 6.8 box, a Dell R320 lspci tells me 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) so it *should* accept an SAS drive. I've got a Cheetah that's a few years old, and having pulled it out of another server (in the datecenter), I put it in this box to zero it out for reuse... and the box refuses to see the drive. *Nothing* in dmesg,...
2009 Jul 30
4
LSI MegaRAID system status
...ce sdc: 2343745536 512-byte hdwr sectors (1199998 MB) *sdc: Write Protect is off *sdc: Mode Sense: 00 00 00 00 *sdc: asking for cache data failed *sdc: assuming drive cache: write through * sdc: sdc1 sdc2 sdc3 *sd 5:1:0:0: Attached scsi disk sdc lspci -v 03:0e.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 0a) Subsystem: LSI Logic / Symbios Logic MegaRAID SATA 300-8X RAID Controller Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 17 Memory at cfcf0000 (32-bit, prefetchable) [size=64K] Memory at fe500000 (32-bit, non-prefetchable) [size=1M]...
2010 Aug 23
2
i can't install centos on my poweredge 2950
hi i m trying to install centos5 on my poweredge 2950 with no luck. the raid controler is LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) indeed all is going fine during the installation but when i reboot the server panic the first error i got is this one error mounting /dev/root on /sysroot as ext3: block device required it seems that it can't find the /dev/root devices. but when i boot in...
2017 Jul 02
2
Re: 答复: virtual drive performance
...t; > </disk> > > > > > > Do you see any gotchas in this configuration that could prevent the > > > virtualized guest to power on and boot up? > > > > > > > > When I configure like this, from a linux guest point of view I get this > > Symbios Logic SCSI Controller: > > 00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a > > > > But htis is true only if you add the SCSI controller too, not only the > disk > > definition. > > In my case > > > > <controller type='scsi...