Displaying 8 results from an estimated 8 matches for "sx200".
Did you mean:
scx200
2005 Apr 22
4
TE11OP -> Mitel 200Sx??
Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows.
Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card.
All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card.
Any advice would be great.
Zaptel.conf
span=1,0,1,d4,ami
e&m=1-23
dchan=24
2005 Oct 10
2
Asterisk and Mitel SX 200 Slip and Frame Errors causing Major Ala rms
We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get
over 500 frame errors and over a 500 slip errors per hour. When the errors
reach 1000 per hour the Mitel will take it's T1 card offline. At that point
no calls can be routed from the Asterisk server to the Mitel and the TE110P
reports a Yellow alarm.
What can be causing all th...
2005 Oct 12
0
Zaptel Debug: "T1: Lost our place, resyncing "
We are trying to debug a connection between Asterisk and a legacy PBX (Mitel
SX200). We turned on the Zaptel debugging and we get the following message
quite frequently:
Oct 12 07:14:09 localhost kernel: T1: Lost our place, resyncing ( 28 )
Oct 12 07:14:09 localhost last message repeated 3 times
--
Oct 12 07:14:11 localhost kernel: T1: Lost our place, resyncing ( 28 )
Oct 12 07:...
2005 Oct 06
1
Results of an incorrect crossover pinout??
Say I had a crossover cable that connected a Mitel SX200 to a TE110P and the
pinout was done as such:
1 - 4
2 - 5
5 - 1
4 - 2
(the 5 and 4 are transposed on the left side)
Instead of the proper way of:
1 - 4
2 - 5
4 - 1
5 - 2
What would the results be? We have had the former as our cabling for a few
months and the connection has been fine. Slip...
2006 Feb 23
1
Explain Yellow Alarm in a Legacy Integration
How would you categorize a Yellow Alarm sensed by the Asterisk side in a
Legacy PBX integration?
We have a Mitel SX200 connected to an Asterisk(1.2.4) with a TE110P.
Twice today (first time in over a month) we received a Yellow Alarm on the
TE110P. I have been able to clear it easily by restarting zaptel.
Thanks in advance!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://li...
2005 Jul 22
1
Interconnect with Mitel PBX
I have a small government department that wants me to implement a
Asterisk installation, however, they connect to the Government PBX, a
Mitel SX200, and want to keep the ability to do that. I know there is no
chance to connect the digital extension lines, but would it be possible
to have the pbx admins send analogue extensions over and have those
lines interface through an FXO interface? Or what other way could it work?
--
Chris Mason
Net...
2005 Jun 13
0
Unable to support trunking .... without zaptel timing
...13 16:26:05 WARNING[2870] chan_iax2.c: Unable to support trunking on
peer 'zoom_trunk' without zaptel timing
I have a TE110P card and IAX setup between two servers that appear to work
fine. The only reason this has come to my attention is when I was trouble
shooting an error with our Mitle SX200 that was reporting:
T1/BRI Card at 02 06 00 00
Has exceeded the maint loss frame threshold.
My main question is in regards to the timing error but if anyone has any
Mitel experience (scott w!) that has seen this other error.= I'd be happy to
hear about it....
Here is zapata.conf:
[trunkgrou...
2005 Feb 18
6
W&M Wink timings for Nortel
Does anyone know the default E&M Wink timings for Nortel DID ports?
The default settings on Asterisk are:
; prewink: Pre-wink time (default 50ms)
; preflash: Pre-flash time (default 50ms)
; wink: Wink time (default 150ms)
; flash: Flash time (default 750ms)
; start: Start time (default 1500ms)
; rxwink: Receiver wink time (default 300ms)
;