search for: swec

...) Card 0 Span 4 RED 0 0 0 (the 4th span is not live, so that seems like a good output). Another output: /etc/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource 1 PRI Clear (SWEC: MG2) 2 PRI Clear (SWEC: MG2) 3 PRI Clear (SWEC: MG2) 4 PRI Clear (SWEC: MG2) 5 PRI Clear (SWEC: MG2) 6 PRI Clear (SWEC: MG2) 7 PRI Clear (SWEC: MG2) 8 PRI Clear (SWEC: MG2) 9 PRI...

...,b8zs bchan=49-71 dchan=72 echocanceller=mg2,49-71 # Span 4 span=4,4,0,esf,b8zs bchan=73-95 dchan=96 echocanceller=mg2,73-95 # Global loadzone = us defaultzone = us Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) (EC: VPM450M) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) (EC: VPM450M) 3 TE2/0/1/3 Clear (In use) (SWEC: MG2) 4 TE2/0/1/4 Clear (In use) (SWEC: MG2) 5 TE2/0/1/5 Clear (In use) (SWEC: MG2) 6 TE2/0/1/6 Clear (In use) (SWEC: MG2) 7 TE2/0/1/...

...ot;T4XXP (PCI) Card 0 Span 1" (MASTER) group=1 context=frompstn switchtype = euroisdn signalling = pri_cpe channel => 1-15,17-31 context = default cat /proc/dahdi/1 Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED 1 TE4/0/1/1 Clear (In use) RED(SWEC: MG2) 2 TE4/0/1/2 Clear (In use) RED(SWEC: MG2) 3 TE4/0/1/3 Clear (In use) RED(SWEC: MG2) 4 TE4/0/1/4 Clear (In use) RED(SWEC: MG2) 5 TE4/0/1/5 Clear (In use) RED(SWEC: MG2) 6 TE4/0/1/6 Clear (In use) RED(SWEC: MG2) 7 TE4/0/1/7...

...at /proc/dahdi/1 is following (I am afraid from the IRQ misses: 1, so if it is a problem what is the solution)? [root at CC asterisk]# cat /proc/dahdi/1 Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED IRQ misses: 1 1 TE2/0/1/1 Clear (In use) RED(SWEC: MG2) 2 TE2/0/1/2 Clear (In use) RED(SWEC: MG2) 3 TE2/0/1/3 Clear (In use) RED(SWEC: MG2) 4 TE2/0/1/4 Clear (In use) RED(SWEC: MG2) 5 TE2/0/1/5 Clear (In use) RED(SWEC: MG2) 6 TE2/0/1/6 Clear (In use) RED(SWEC: MG2) 7 TE2/0/1/7 Clear...

...#39;ve searched and searched on the possible problems. If anyone can help me that would be great. Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF CRC4 error count: 4750 E-bit error count: 5023 Timing slips: 72 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) 3 TE2/0/1/3 Clear (In use) (SWEC: MG2) 4 TE2/0/1/4 Clear (In use) (SWEC: MG2) 5 TE2/0/1/5 Clear (In use) (SWEC: MG2) 6 TE2/0/1/6 Clear (In use) (SWEC: MG2) 7 TE2/0/1/7 Clear (In use) (SWEC...

Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the

...igurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default ;;; line="2 WCTDM/4/1 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 2 callerid= group= context=default ;;; lin...

...onf) * ; * ; This is not intended to be a complete chan_dahdi.conf. Rather, it is * intended * ; to be #include-d by /etc/chan_dahdi.conf that will include the global * settings * ; * * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 1 * callerid= * group= * context=default * * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel =>...

Hi, I've seen this USB product from Sangoma : http://www.sangoma.com/products_and_solutions/hardware/analog_telephony/usb_fxo.html Is it working ok ? Is it easy to integrate it with Asterisk ? How would you rate your experience with it ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

...han_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXOKS (In use) (SWEC: MG2)" signalling=fxo_ks callerid="Channel 1" <4001> mailbox=5000 group=5 context=from-fax-machine channel => 1 callerid= mailbox= group= context=default ;;; line="2 WCTDM/4/1 FXOKS (In use) (SWEC: MG2)" signalling=fxo_ks callerid="Channel 2" <4002&g...

...y good support team there). But the client is of course chomping at the bit to get the system live. We are totally out of touch on the subject of software echo cancellation in asterisk. The system is running 1.4.28 and Dahdi 2.2.1-RC2. I understand that when Dahdi detects no HWEC, it enables SWEC by default. Is there anything I can do to tweak the settings to try and make this liveable for the client until we get the card? The server is in the Caribbean, so it may actually be a bit before the card arrives. We would love to get them running before then, but it is so bad right now that...

...rvicing 2 Channels - 3 [ 72.510681] rcbfx 1: Starting DMA [ 72.530147] rcbfx 1: Spotted a Rhino: Rhino RCB8FXX (1 modules) root at pbx:/etc/dahdi# Dahdi also sees it: root at pbx:/etc/dahdi# lsdahdi ### Span 1: Rhino RCB8FXX/1 "Rhino RCB8FXX/1" (MASTER) 1 FXS FXOKS (SWEC: MG2) 2 FXS FXOKS (SWEC: MG2) 3 EMPTY 4 EMPTY 5 EMPTY 6 EMPTY 7 EMPTY 8 EMPTY root at pbx:/etc/dahdi# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.1-rc2 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXO Ke...

...han_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXOKS (In use) (SWEC: MG2)" signalling=fxo_ks callerid="Channel 1" <4001> mailbox=5000 group=5 context=from-fax-machine channel => 1 callerid= mailbox= group= context=default ;;; line="2 WCTDM/4/1 FXOKS (In use) (SWEC: MG2)" signalling=fxo_ks callerid="Channel 2" <4002&g...

...ll. My current config as follows :- X100P clone card /etc/dahdi/system.conf # Span 1: WCFXO/0 "Generic Clone Board 1" (MASTER) fxsks=1 echocanceller=mg2,1 /etc/asterisk/dahdi-channels.conf ; Span 1: WCFXO/0 "Generic Clone Board 1" (MASTER) ;;; line="1 WCFXO/0/0 FXSKS (SWEC: MG2)" signalling=fxs_ls callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default /etc/asterisk/chan_dahdi.conf [trunkgroups] [channels] language = my ; usecallerid = yes callwaiting = yes usecallingpres = yes callwaitingcallerid = yes threewaycalli...

Hi All, I have installed asteriskNow with Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured x100p fxo card in my asterisk box. But in my cli mode i am not getting the command *"dahdi show status"* Output of CLI : astrisks*CLI> *dahdi show status* No such command 'dahdi show status' (type 'core show help dahdi show' for other possible commands) I

...s not shared: # cat /proc/interrupts 18: 4930240 IO-APIC-fasteoi vzaphfc # dahdi_hardware pci:0000:02:09.0 zaphfc+ 1397:2bd0 HFC-S ISDN BRI card # cat /proc/dahdi/1 Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER) AMI/CCS 1 ZTHFC1/0/1 Clear (In use) (SWEC: OSLEC) 2 ZTHFC1/0/2 Clear (In use) (SWEC: OSLEC) 3 ZTHFC1/0/3 Hardware-assisted HDLC (In use) (that's with asterisk running) # cat /etc/dahdi/system.conf span=1,1,0,ccs,ami bchan=1-2 hardhdlc=3 echocanceller=oslec,1-2 loadzone = ch defaultzone = ch # dahdi_cf...

...initdir:charp parm: debug:Sets debugging verbosity as a bitfield, to see general debugging set this to 1. To see RBS debugging set this to 32 (int) parm: deftaps:int parm: max_pseudo_channels:Maximum number of pseudo channels. (int) parm: hwec_overrides_swec:When true, a hardware echo canceller is used instead of configured SWEC. (int) parm: auto_assign_spans:If 1 spans will automatically have their children span and channel numbers assigned by the driver. If 0, user space will need to assign them via /sys/bus/dahdi_devices. (int) What can b...

...to all developers, testers, etc. for the sacrifices you give to bring such great software to all of us! -Jr -- John Reynolds jreynold@sedona.ch.intel.com DEG/SG Storage Components Division MS: CH6-332 Phone: 480-554-9092 Structural / Physical Design Engineering swec.ch.intel.com/~jreynold/

...ls Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER) ;;; line="1 WCFXO/0/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 /etc/asterisk/chan_dahdi.conf [channels] usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=...

In what scenarios non-Echo Cancellation cards (T1/E1/FXO) should be used ? Don't all good and professional installations need echo cancellation cards? Are there people out there with non-Echo Cancellation cards for T1 or 8 FXO ports and who really don't have any echo issues and they are running serious businesses? -- Zeeshan A Zakaria -------------- next part -------------- An HTML