search for: surging

I am sorry if this is an FAQ, but there doesn't seem to be searchable archives, and the supported manufacturer's list doesn't include "surge master". Google was also not much help. I have just put a Linux box and the customer has a "surge max " UPS. Anyone any ideas what protocol it uses? There is a Green serial cable. The manufacturers web site is here:

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

I lost one channel on an FXO module on a Sangoma A200 card due to a lightening zap in the area (well - it died the same night as a major thunder storm came through).... Is there a recommended/standard surge protector for phone lines I should be using? My server has 2 POTS lines. thanks Todd

Hi, Suppose I have: # Fit a base model d1.ph <- coxph(Surv(start, stop, event)~ ejec + diavol + score + smoking + beta + surg.done, data = data.frame(foo)) summary(update(d1.ph, . ~ . + td1)) summary(update(d1.ph, . ~ . + td2)) As I have many columns in my data frame, foo, called td's. e.g. td1, td2, td3, .... And I'd like to

I'd like to protect my expensive Digium FXO cards from spikes on my three incoming PSTN lines. Does anyone have any recommendations? -- Eric Cooper e c c @ c m u . e d u

All, I have a fairly old Compaq R3000h which is overdue for new batteries. Before I go and splash out a few hundred francs, I'd just need a quick sanity check - when I disconnect the power (UPS under load), it cuts out pretty much right away, so the batteries are flat (even though the charge indicator says full). When I reconnect the power, the surge triggers a 16A mains fuse. This sounds

Dear All- I am looking at the bivariate point process model for extreme values as described in Section 8.3.2 of Coles book. I am stuck at a very low level in being unable to reproduce the initial step of transforming the data to unit Frechet margins. In particular, I am unable to reproduce the wave-surge pairs distribution after transformation to Frechet scale (Figure 8.6 of Coles

We have CENTOS 5.2 on DELL server. While I run "yum update" and yum start download files. in middle of download there have power surge and computer reboot. Does there has way to clean yum download? Thanks ___________________________________________________ ??????? ? ???????????????? http://messenger.yahoo.com.tw/

I have a CentOS-5.6 remote server in a house in Italy, where there are occasional thunder-storms. There was one yesterday, when the electricity went off 3 times, for a second or so on each occasion. My server, an HP MicroServer, came back (re-booted) on 2 of the 3 occasions, but not on the third. I assume that the problem arises because the machine does not close down properly. (Although it is

I just got back from Boston where we completed testing of the TE410P for FCC, Euro, and Australian approvals, and I'm happy to say we passed all our approvals (including Q.921 and Q.931 layers, i.e. libpri as well as surges) for both telco and leased line applications. Hopefully we'll have the official documents soon, but I know there are a lot of you out there that are happy to hear

I'm greatly surprised when testing an Asterisk box with 802.11g. Here's the topology: VoIP caller --- 802.11g --- Asterisk --- 802.11g --- VoIP extension | FXO ___ PSTN extension When I call a VoIP extension on that box (from a VoIP extension), voice is good. But when this box tries to bridge the call with a

Buenos días a todxs, Estoy comparando la predicción de los valores (0, 1, 2, 3,.....hasta 13) frente a los observados. Con la idea de comparar el modelo Zero inflated y el Binomial negativo y ver cual presenta mas distancia frente a las predicciones observadas. Para ello introduzco los códigos en la consola: #Modelo ZIM pred<-round(colSums(predict(zeroinfl, type="prob") [,1:14]))

Hi! There is surge of spam bug reports with support phone numbers of various companies. I remember couple of such reports made ~ 2-3 weeks ago. I think will be good idea to block IP-addresses or their range, if Bugzilla support this, since a-mails are different. Eugene.

I don't think I've ever seen so many commits to the CVS, I'm not complaining. To save lots of checkout/test cycles can a message be posted when the current surge is over? -- Dave Cotton Directeur Linux Autrement 193 rue Marcel Cerdan 84270 Vedene 04 90 23 30 81 <http://www.linuxautrement.com> IAX 17004902330 FWD 42651

I had a weird (unforeseen) situation today. We have a remote office with an * server and ISDN 10 service. We connect to each other over an IAX trunk with G729. Today, some of Sydney experienced a power surge which knocked out their ISDN services. Without a clock source on their PRI card, my IAX calls to them resulted in one-way audio (they could hear me, but I not them). Is it possible to load

> With 3.3.5 my first test took 5 times to produce a non "bus > error" build. There were no 'make cleans' in between. > > What is going on? You mean you used your bsd-ports-provided gcc to compile LLVM and you've got 4 times a bus-error during the build? In this case, it cannot be a LLVM problem. In the linux-community, people say that bus-error's are

Hola Javier, Si, cuando hablo de valor observado me refiero al valor real en campo y el predicho al que estiman los modelos. Disculpa, que no lo detallase así desde el principio. En mi caso trabajo con dos diferentes: Zero inflated y Binomial Negativo y me gustaría comprobar que diferencia (distancia) existe entre cada uno de ellos y la realidad. Estoy trabajando con los siguientes paquetes:

Thought I would post this experience to the list so it's archived for posterity... My company is deploying Asterisk-based PBX's to all of our branch offices. Each office has 2 analog Voice lines and a fax line. We didn't want to go to the expense of using TDM400's in the servers (which run asterisk and Hylafax) so we opted for 2 X100P cards in each box. So far they have

On Tue, Jun 17, 2008 at 4:56 PM, Edd Barrett <vext01 at gmail.com> wrote: > On Tue, Jun 17, 2008 at 4:51 PM, Edd Barrett <vext01 at gmail.com> wrote: >> I am trying the same with gcc-4.2 now. > > The above results were infact with gcc-4.2. My apologies. With 3.3.5 my first test took 5 times to produce a non "bus error" build. There were no 'make

On Jan 9, 2020, at 5:51 PM, Gene Heskett wrote: > > On Thursday 09 January 2020 16:59:12 Charles Lepple wrote: > >> On Jan 9, 2020, at 4:39 PM, Gene Heskett <gheskett at shentel.net> wrote: >>> So for starters, what's the best ./configure command line? >> >> There’s this page for matching the layout of an existing Debian >> install: >>