search for: suppresion

Hello, I'm trying to use Asterisk as a SIP PBX with H.323 trunk connectivity. Everything works except that calls that comes from the H.323 side do not get audio both ways. Since the other way round works fine (calls to H.323 side), I suspect the problem to be in the way VAD or Silence suppresion is negotiated. Is there a way to disable VAD in the Asterisk for H.323 gatekeeper connectivity ? I have tried with both H.323 and OH323 modules with no success. Regards, Jorge A.

I would like to suppress the text 'Scatter Plot Matrix' that appears under the plot. Could someone please suggest how? _____________________________ Professor Michael Kubovy University of Virginia Department of Psychology USPS: P.O.Box 400400 Charlottesville, VA 22904-4400 Parcels: Room 102 Gilmer Hall McCormick Road Charlottesville, VA 22903 Office: B011

...path from 8 to 6 Zap1-1 answered SIP/105-ce3c WARNING[71694]: File chan_zap.c Line 3367 (zt_write):Cannot handle frames in 256 format Hangup Zap/1-1 2) have discovered a problem when using g729 under the following setup: SIP call between a Budgetone 102 and ATA 186 (configured without silence suppresion). Both ends have a ADSL 64kbps. Both ends are behind Linksys routers. The pings between them are aprox. 100ms. No other local users on each end. * is being hosted on a PIII,128MB. No other calls are being handled at the time of the test. Basically, after a few minutes, with g729, both ends consi...

Dear r-helpers, In basic graphics, I have a figure with x and y axes suppresed. I would like to move the xlab and the ylab closer to the axes. Do I have to use mtext()? _____________________________ Professor Michael Kubovy University of Virginia Department of Psychology USPS: P.O.Box 400400 Charlottesville, VA 22904-4400 Parcels: Room 102 Gilmer Hall McCormick Road

...he timer counting after hangup. I check the CLI and the hangup is being executed, I certainly was concerned it might be keeping the line open but that doesn't seem to be the case. I thought that she should go back to the date/time display but that doesn't happen. I don't have silence suppresion on and I've gone over the other configs compared with what's on voip-info many time. One other thing, there isn't a dial tone when I pick it up. It seems to 'work'; both inbound and outbound. It's connected to * 1.09 which is registered @broadvoice. Thanks for any insigh...

Hi I have the following setup to make outgoing calls: X-Lite (build 34025) at home behind NAT -> Internet -> Asterisk at work behind NAT -> Internet -> VoIP provider -> GSM gateway -> cellphone. I just tried calling my own cellphone, but there is no sound either way. Here's what I did on the X-Lite at home in the Topology section: IP address : Discover global address

...s capable of transmitting good sound. Using the speaker-phone on the SPA-941 sounds significantly better than using the handset. But we need the handset to also sound good. I've tried different providers etc. and always come back to the phone. I'm using G711u codec in all cases and silence suppresion is off. I saw a previous thread that mentioned changing the RTP from .03 to .02, however the post was regarding a MeetMe issue. I tried anyway, and it introduced an echo on the line. I've seen many rave reviews regarding the sound quality on the SPA-941, so I'm wondering if maybe I got a...

-- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 -- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 RFC3389: 5 bytes, level 0... Aug 27 08:32:16 NOTICE[23572]: rtp.c:289 process_rfc3389: RFC3389 support incomplete. Turn off on client if possible Killed Whenever I make a call between extension 101 and 1009 which are both Xten Xlite SIP clients, I get that error and

Howdy Folks: This may be slightly (but not entirely) off-topic for this list, but I'm sure there are some real gurus out there who should know this (and I've seen a number of related questions) so here goes: We just got a new HP8100DN printer. The guy didn't want to let me do the samba printserver thing, nor did he put it on a windoze box - he put it directly on the network

...thing as good as what we have now!" :) Anyway, if you search the list archives you should be able to find some comments about how the echo functions are supposed to be used... Good luck, Tom GUSTAVO GARCIA BERNARDO (ggb@tid.es) wrote: > > Hi, > I think speex library support echo suppresion/cancellation (may be experimental). How can i test it? Are there any sample or documentation about it? > > Thx. Best regards. > > ..g --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a mess...

...and i still have not found the answer, in conclusion: I have two x-lite clients, that can call each other, connection is stablished but no audio is transmited, i follow the recomendations: 1. Install the iblc and spx registry patch (Windows 2K) 2. Work only with the alaw codec 3. Disable silence suppresion. but i still get: RFC3389 support incomplete. Turn off on client if possible RFC3389: 5 bytes, level 0... RFC3389: 5 bytes, level 0... The above message also is showing when the call is comming from a zap defice and the application Dial (Zap, SIP/313) is executed (without the RFC3389: 5 bytes,...

Hey everyone, I have been trying to figure this out and I am just getting no where with it. The office is using Polycom IP 601 phones. Everything sounds great in terms of quality on both heads. However, users of the phone are having trouble with their headsets and handsets. Some users are hearing their voices back come back on the phone. If they adjust their volume lower, then it goes away,

Hi When i make a call using IAX2, the log of the remote asterisk say Nov 17 20:20:12 NOTICE[28686]: File rtp.c, Line 263 (process_rfc3389): RFC3389 s upport incomplete. Turn off on client if possible Nov 17 20:20:22 NOTICE[28686]: File rtp.c, Line 263 (process_rfc3389): RFC3389 s upport incomplete. Turn off on client if possible Nov 17 20:20:26 NOTICE[28686]: File rtp.c, Line 263

Hi, there: When plot ann predicted results I need to indicate numbers of inputs for each column. V1 V2 V3 V4 1 86.2700 49.9380 30.7630 0.1327 2 89.5127 55.9707 33.7683 0.1186 3 91.1833 58.4670 34.5610 0.1134 matplot(t, pch = 1:4, type = "o", col = rainbow(ncol(t)),xlab = "No. of inputs ", ylab = "Mean of 6 Datasets",

http://bugzilla.mindrot.org/show_bug.cgi?id=906 Summary: syslog messages from sshd [net] lost Product: Portable OpenSSH Version: 3.8.1p1 Platform: All OS/Version: Linux Status: NEW Severity: minor Priority: P2 Component: sshd AssignedTo: openssh-bugs at mindrot.org ReportedBy: peak at