search for: sunblad

...solution to my lack of good graphics options for my aging sun system. I saw here before back in early December of 2011 a most of someone saying that it seemed that the nouveau drivers almost worked with him and is Sun Ultra 10. I am someone who is very fond of my Sun systems, I have two "SunBlade 100"s, and a "Sun Ultra 5". I have always been annoyed at the lack of good video card options when using these systems. I would love to have more room on my screen then 1024x768. So when I saw this post on the list http://lists.freedesktop.org/archives/nouveau/2011-November/0096...

I have a test cluster running HA-NFS that shares both ufs and zfs based file systems. However, the behavior that I am seeing is a little perplexing. The Setup: I have Sun Cluster 3.2 on a pair of SunBlade 1000''s connecting to two T3B partner groups through a QLogic switch. All four bricks of the T3B are configured as RAID-5 with a hot spare. One brick from each pair is mirrored with VxVM 4.1 with a ufs file system on top of the mirror. I have mirrored the other two bricks via a Zpool. I ha...

...smb.conf file. No other changes have been made in relation to nsswitch.conf (winbind added during install) and we have not made specific changes to PAM config. Therefore authentication is done directly with the domain as per the following smb.conf file:- [global] workgroup = DEV1 netbios name = SUNBLADE server string = SunBlade interfaces = 192.168.3.10 bind interfaces only = Yes security = DOMAIN encrypt passwords = Yes password server = NTPDC log file = /usr/local/samba/var/log.%m max log size = 50 local master = No domain master = No dns proxy = No winbind uid = 10000-20000 winbin...

Today I attempted to upgrade to S10_U2 and migrate some mirrored UFS SVM partitions to ZFS. I used Live Upgrade to migrate from U1 to U2 and that went without a hitch on my SunBlade 2000. And the initial conversion of one side of the UFS mirrors to a ZFS pool and subsequent data migration went fine. However, when I attempted to attach the second side mirrors as a mirror of the ZFS pool, all hell broke loose. The system more or less became unresponsive after a few minutes....

I have compiled and installed NUT-2.2.1 on Solaris 10 on my Sunblade 2000 and it seems to work very well, except that the behaviour of 'wall', which upsmon uses to report significant events, may differ on Solaris from other systems. On Sol10, wall writes the message *only* on the console, unless the "-a" switch is used. On a standard JDS (GNOME) s...

I have upgraded my openssh version from 2.2.0.p1 to 3.0.2p1. 3.0.2 was compile on a sunblade 100 running Solaris 8. Is it possible for my to use my existing DSA key? Thanks, David Higdon UNIX System Administrator (503) 450-4800 (Office) (503) 701-5558 (Cell Phone) higdon.david at cnf.com

I am a newbie to both UNIX and SAMBA and I would like to install Samba 2.2.2 on a Sunblade 100 workstation running Solaris 8 to be utilized as a file and print server via TCP/IP with a small network of machines running Windows 98SE and Windows 2000 server. Could anyone suggest documents or references I might consult in order to obtain detailed step by step instructions for successfully...

Hi, I'm running kernel 2.6.8-15, lvm2 v2.01.04-5 and acl v2.2.23-1 on a Sunblade 100 (sparc). In a few months we have experienced for several times that an ext3 filesystem is remounted as read-only (this is due to the option "errors=remount-ro" in /etc/fstab). Sometimes there is no error in log files but sometimes we see: kernel: init_special_inode: bogus i_mode...

Hi all, i compiled Samba 2.2.5 with gcc on a Sunblade with Solaris 2.8. Last month i compiled Samba 2.2.4 on the same machine without problems. The following options i used: ./configure --with-winbind --with-pam --with-quotas I got the following warnings: Linking bin/wbinfo Compiling nsswitch/winbindd.c Compiling nsswitch/winbindd_user.c Compilin...

Is there a card for OpenSolaris 2009.06 SPARC that will do SATA correctly yet? Need it for a super cheapie, low expectations, SunBlade 100 filer, so I think it has to be notched for 5v PCI slot, iirc. I''m OK with slow -- main goals here are power saving (sleep all 4 disks) and 1TB+ space. Oh, and I hate to be an old head, but I don''t want a peecee. They still scare me :) Thinking root pool on 16GB ssd, perhap...

In R 1.9.0 running under Solaris 2.9 on a SunBlade 100, with "Sun WorkShop 6 update 2 C++ 5.3 2001/05/15" as the C++ compiler, I just did > install.packages("e1071") The output includes these lines, which I have wrapped to fit nicely in mail: ** libs cc -I/users/local/lib/R/include -I/usr/local/include -KPIC -xlibmil \ -da...

I'm trying to build NUT 2.2.1 on a SunBlade 2000 running Solaris 10 (Solaris 10 11/06 s10s_u3wos_10 SPARC) It won't compile. I'm not a programmer, so I'm afraid I don't know why... [huge at anubis ~/Prog/nut/nut-2.2.1]: ./configure --with-user=ups --with-group=nutNetwork UPS Tools version 2.2.1 checking build system type....

I have R 1.9.0 running under Solaris 2.9 ona SunBlade 100, and am very happy with it. I heard about the stuff at www.rmetrics.org and thought it might be worth looking at. However, what I found there is a bunch of .zip files. The entry page suggests that there is some way to install packages from .zip files in R, but I have searched all the docume...

I'm running R2.0.1 under Solaris 2.9 on a SunBlade 100. When I installed it, I set things up to use the Sun compilers cc, CC, f95 with the options recommended in the installation and administration guide. Until today, no worries. With all this discussion about R GUIs I thought I'd give R Commander a go. The web page said to install a bunch o...

Hi, Sometimes I want to "reset" the R interpreter (as if I quit and started it again, with everything starting from scratch). The main reason for this is when I expreriment with calculations, and later form them into general functions, sometimes I forget to include variables or reset some settings which I don't notice because they are already set. This causes problems during batch

I am attempting to use the 'dfree command' option of smb.conf to handle a few special cases and the like for returning disk free information. The Samba server is acting in a PDC role, running Samba 2.2.3a on a SunBlade 100 running Solaris 8, patched with all Recommended patches. From a Windows 2000 box (the only thing I have handy to test with, and will be the bulk of our client systems when this is deployed), the disk free command is already broken natively, and my dfree script never gets called (it, for d...

I'm trying dovecot-0.99.9.1 in place of uw-imap which ground to a halt on a 500MHz SunBlade 100 Solaris 8 system which acts as our Departmental mail server. INBOXes are mbox files on the servers's local SCSI disk. But user directories are auto mounted from other Sun NFS servers and these may contain other mbox mailboxes in a ~/Mail directory. There's a problem with creating (an...

...ith Michael on this problem, here are some further > details that may help troubleshoot the issue: > > The error seen when starting DomU is in fact "Failed to assign device > to IOMMU". > > We're using the following system setup for our Xen environment: > > SunBlade 6000 chassis > SunBlade X6270 blade > SuSE ES11 SP1 64bit Dom0 (Xen 4.0.0 - Kernel 2.6.32.12-0.7-xen ) > SuSE ES11 SP1 64bit DomU > > The lspci -vt output at Dom0 looks like this: > > ### > -[0000:00]-+-00.0 Intel Corporation 5520 I/O Hub to ESI Port >...

Hi I'm having problems PXE-booting a Sun-Blade 100x. As the subject line says, booting stops during "Loading /bzimage...." Broadcom UNDI PXE-2.1 (build 082) v6.2.11 Copyright (C) 2000-2003 Broadcom Corporation Copyright (C) 1997-2000 Intel Corporation All rights reserved. CLIENT MAC ADDR: 00 03 BA 44 4F F4 GUID: 00000000 0000 0000 0000 000000000000 CLIENT IP: 10.148.11.21 MASK:

llvm itself compiles fine. gcc frontend has the error, see below. I applied the attached patch, since the name of architecture on FreeBSD is sparc64, not sparc. There is also one more replacement sparc -> spaarc64 was made in gcc/Makefile in llvm-gcc. FreeBSD -8.0-STABLE gcc-4.5.0 sunblade 100 Yuri gmake[2]: Leaving directory `/tmp/llvm-build/2.7/llvm-gcc-4.2-objects/libdecnumber' gmake[2]: Entering directory `/tmp/llvm-build/2.7/llvm-gcc-4.2-objects/gcc' /tmp/llvm-build/2.7/llvm-gcc-4.2-objects/./gcc/xgcc -B/tmp/llvm-build/2.7/llvm-gcc-4.2-objects/./gcc/ -B/usr/local/...