search for: stright

...a few bad sector messages in my /var/log/messages. I have read where an "fsck -c -c /dev/hda" may be what I need. Before I go doing such things I am looking for confirmation that that is what I should do. Anyone please comment on how to tell linux to not use sectors in my disk. This is stright IDE no raid not nothing at this point /dev/hda is all. Thanks, jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20050603/32d8ee47/attachment-0004.html>

...Asterisk side seems to be ok. pri show span 4 Primary D-channel: 12 Status: Provisioned, Up, Active Switchtype: EuroISDN Type: Network (PtMP) Window Length: 135411676/135411612 Sentrej: 135412124 SolicitFbit: 135411996 Retrans: 135412060 Busy: 135411548 Overlap Dial: 0 -------------------- Using Stright cable ( do hope that board croses pins with jumpers). But niver small lucent PBX indicates link, niver ISDN Courier I modem connects to board. Has anybody idea were to dig? Configuration looks like: cat /etc/asterisk/zapata.conf [channels] switchtype = euroisdn signalling = bri_cpe_ptmp hide...

...easier for people to use it. When using the graph, the linear decrease in 1/crea over time will be useful for managing patients. Here is what I came up with, but how do I configure the Y axis with the natural values 40-2000 umol/l alongside their reciprocal representation, so that 1/crea will be a stright line ? x <- NA y <- NA plot(x,y,xlim=c(0,10),ylim=c(40,2000)) grid(nx=10,ny=10,col="black",lty="solid") grid(nx=120,ny=10,col="black",lty="dotted") Troels Ring, M.D Department of Nephrology Aalborg, Denmark tring at mail1.stofanet.dk -.-.-.-.-....

Is there any way to have the plugin require SSL to be used for all actions in a controller and just specify the ones you dont want to require SSL using ssl_allowed? class ApplicationController < ActiveRecord::Base include SslRequirement ssl_required *.* Many thanks. Also I could of course combine this with local.request? so that when developing locally http is allowed, but

I Dears, if that wouldn't take u too much effort I'd like to ask for a swift opinion: I have a alinear (mixed effect) model that I wish to run as a piecewise one. When I predict the values Iget quite some odds and disturbing results: The predicted stright line after the break point is not straight at all, instead behaves like if it was a hig order polynomial or something similar!!!! I attach the codes below, hoping someone can point me the mistake.... I sincerely express many thanks in advance ...... Federico Bonofiglio frame3<-data.frame(...

Hi there, I'm a newbie, plesae bear with me. I have a dataset with about 10000 ~ 30000 data points. Would like fit to both Gamma and Normal distribution to see which one fits better. How do I do this in R? Or I could do a normality test of the data, if it's normal, I then will do a normal fit, otherwise, a gamma fit. But again, I don't know how to do this either. Please help! David

.../* > + * preempt_enable_no_resched() so we don't add any preemption points until > + * after the caller has returned. > + */ > +#define preempt_enable_runtime_patch() preempt_enable_no_resched() > +#define preempt_disable_runtime_patch() preempt_disable() NAK, this is probably a stright preemption bug, also, afaict, there aren't actually any users of this in the patch-set.

Hi, I started using linux (Ubuntu 10.04) in my bussines 3 months ago. Replacing my windows machines. Up to now, was all stright forward, and without problems. I am using wine (with all it's recomended upgrades). I use wine, because I have a little visual fox program that runs the invoices and stuff like that. Until yesterday, I was printing normally. No problems at all, and quite happy. But... I can not print today...

Hi, I have my Samba Server setting as a PDC, but I wouldn't like that Windows XP store and retrieve profile from the server. Does anyone know how I can do it? Thanks, Cleiton

...ll the !paravirt patches are more or less the same as before (the only real > change is the copyright lines in the first patch). > > The paravirt stuff is 'simple' and KVM only -- the Xen code was a little more > convoluted and I've no real way to test that but it should be stright fwd to > make work. > > I ran this using the virtme tool (thanks Andy) on my laptop with a 4x > overcommit on vcpus (16 vcpus as compared to the 4 my laptop actually has) and > it both booted and survived a hackbench run (perf bench sched messaging -g 20 > -l 5000). > > So...

...ll the !paravirt patches are more or less the same as before (the only real > change is the copyright lines in the first patch). > > The paravirt stuff is 'simple' and KVM only -- the Xen code was a little more > convoluted and I've no real way to test that but it should be stright fwd to > make work. > > I ran this using the virtme tool (thanks Andy) on my laptop with a 4x > overcommit on vcpus (16 vcpus as compared to the 4 my laptop actually has) and > it both booted and survived a hackbench run (perf bench sched messaging -g 20 > -l 5000). > > So...

On Mon, Dec 25, 2023 at 1:20?PM Peter Milesson via samba <samba at lists.samba.org> wrote: > Couldn't you setup a completely new Debian VM with the latest Samba from > backports, sync with the old one, transfer the FSMO roles, and then > demote the old one? Wasn't sure I could do that with such a big jump. But it's worth a try. I always have my original as I'm

Hey there, I'm writting a simple app which is gonna take FLAC file and convert them to ogg and mp3 format before sending them to icecast upon streaming. I have search a lot over and can't find a icecast protocol definition, or even an overview anywhere. Is somebody can point me on this one or I have to read the whole icecast source code (I know java but C/C++ is another thing...).

...easier for people to use it. When using the graph, the linear decrease in 1/crea over time will be useful for managing patients. Here is what I came up with, but how do I configure the Y axis with the natural values 40-2000 umol/l alongside their reciprocal representation, so that 1/crea will be a stright line ? > > x <- NA > y <- NA > plot(x,y,xlim=c(0,10),ylim=c(40,2000)) > grid(nx=10,ny=10,col="black",lty="solid") > grid(nx=120,ny=10,col="black",lty="dotted") > >Troels Ring, M.D >Department of Nephrology >Aalborg, Denmar...

...ine in common-auth, it's also in /etc/security/pam_winbind.conf > > Try reading this: > > https://wiki.samba.org/index.php/PAM_Offline_Authentication I did follow the steps and if there's a step missing I'm not seeing it. I haven't performed the tests mentioned, I went stright to trying to log in without a network connection. I'll try those and report back. > > Rowland > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba Thanks! Best regards, Dave.

Hey Support, I am planing to implement new page system with asterisk 1.8 we have 200 SIP calls and page() will overkill my system if announce in one shot. so i am planing to record and play page over 50...50...50 chunk.. I am planing to do with .call file for auto calling after record message but i don't know how to call multiple extension ? and how to use page() with .call file for

On Thu, 28 Dec 2023 18:18:22 +0000 bd730c5053df9efb via samba <samba at lists.samba.org> wrote: > Hi all! > > As a die hard slackware user and as a part of my learning pam process > I installed debian bookworm (12.4.0) in a vm and setup a domain > member server per the instructions in the wiki trying to figure out > how debian does it so I can correct some issues I have

...t patches are more or less the same as before (the only real >> change is the copyright lines in the first patch). >> >> The paravirt stuff is 'simple' and KVM only -- the Xen code was a little more >> convoluted and I've no real way to test that but it should be stright fwd to >> make work. >> >> I ran this using the virtme tool (thanks Andy) on my laptop with a 4x >> overcommit on vcpus (16 vcpus as compared to the 4 my laptop actually has) and >> it both booted and survived a hackbench run (perf bench sched messaging -g 20 >>...

...t patches are more or less the same as before (the only real >> change is the copyright lines in the first patch). >> >> The paravirt stuff is 'simple' and KVM only -- the Xen code was a little more >> convoluted and I've no real way to test that but it should be stright fwd to >> make work. >> >> I ran this using the virtme tool (thanks Andy) on my laptop with a 4x >> overcommit on vcpus (16 vcpus as compared to the 4 my laptop actually has) and >> it both booted and survived a hackbench run (perf bench sched messaging -g 20 >>...

I've compiled samba with the --with-ldapsam option and have setup up an ldap server. When I try to change the password of a user, say Administrator, get the following stuff with full debugging turned on (-D 255): New SMB password: Retype new SMB password: ldap_open_connection: connection opened ldap_connect_system: succesful connection to the LDAP server ldap_search_one_user: searching