search for: sticks

Hi Alan, sorry for the journalctl output. I have now done the following:L * boot into 3.17-rc7 * mount the usb stick (recovery completed) * unmount, mount, unmount - just to be sure all is fine * started usbmon capturing on bus 3 * mount the usb stick * suspend to ram * wake up now the stick is "officially" mounted (/proc/mounts) * umount error messages pop up * try to mount more

On Mon, 29 Sep 2014, Norbert Preining wrote: > Hi Alan, > > sorry for the journalctl output. I have now done the following:L > > * boot into 3.17-rc7 > * mount the usb stick (recovery completed) > * unmount, mount, unmount - just to be sure all is fine > * started usbmon capturing on bus 3 > * mount the usb stick > * suspend to ram > * wake up > now the

El 29/09/14 11:15, Alan Stern escribió: > The first error occurred the first time the computer tried to write > data to the stick following the resume. Oddly enough, an earlier write > before the suspend worked correctly. But the real problem occurred > when the computer asked the stick to provide the reason for the error. > At that point the stick refused to answer. > >

Hello, Ive tried to find any hard information on how to install, and boot, opensolaris from a USB stick. Ive seen a few people written a few sucessfull stories about this, but I cant seem to get it to work. The procedure: Boot from LiveCD, insert USB drive, find it using `format'', start installer. The USB stick it not found (just stands on "Finding disks"). Remove USB stick,

Hi all, This surely has nothing to do with syslinux, but since many people here ar eusing USB sticks as booting devices (using syslinux) this is a good place to ask, I think. I have an Apacer 1GB USB stick that was happily booting PCs using syslinux. But now, after some tests, it does not anymore. It does not even produce some kind of message from syslinux when booting. Nothing. The compute...

Gordon Messmer wrote: > On 07/03/2015 03:43 AM, Timothy Murphy wrote: >> I've tried this again, and it does not seem to work. >> Have you actually tried it? > I don't have a CentOS system here that I can reboot readily. And it > occurs to me that if I did, I didn't ask if your system boots via BIOS > or UEFI. Thanks for your response. It boots via BIOS, and

...ns and I'll do my best to carry them out and report results. (For clarity, I used my 8GB Patriot XT USB stick for the two tests I did with (1) the "archlinux-2014.01.05-dual.iso" file and (2) the "debian-7.3.0-i386-netinst.iso" file.) I have several brands and sizes of USB sticks to play with here, specifically: 2GB Sandisk Blade 4GB Sandisk Blade (3 of these) 4GB Transcend JetFlash Model 530 (2 of these) 8GB Patriot XT 16GB Adata S102 (USB 3.0/2.0) 32GB Patroit Axle I can use any or all of these for testing. Just tell me which ones yo...

...purpose. But I've 2 queries about this: 1. Why isn't this program available on CentOS? 2. I find it strange the using a USB stick seems to be regarded as an out-of-the-ordinary idea. Are people still burning CDs or DVDs? And if so why? I would have thought the time had come to make USB sticks the standard installation method? Certainly it should be treated on a par with DVDs. I have two HP MicroServers running under CentOS, and these don't come with a DVD drive. I assumed this was becoming more or less standard? -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathe...

Having looked at some of the discussions circulating before, I tried the recipe that Bruce Bryne suggested to make a memory stick to be a RedHat EL bootable file system for RedHat installation, but then hit a "missing operating system" problem. Below are the steps I took: a. mkdosfs /dev/sdc1 b. mount /dev/sdc1 /mnt/stick c. cp rhas3u2/isolinux/* /mnt/stick where rhas3u2 is the

Hi all, I have been trying to get a usb stick 8G to boot centos. I am as far a it boots and hangs at "Switching to new root". I take the same USB stick and put it another PC and it boots fine. What might I look for as to why the machine hangs at switching to new root? Of course the machines are different. The one that does not boot is an ebox 2300sx and the one that does boot is an

Hi, Is it possible to know (and pass it as a kernel argument) from which device syslinux booted from? My case is: I have a USB stick with a custom linux installation. Syslinux boots from it, load kernel and initrd. My initrd scans all blocks devices looking for a valid root device and use it when it is found. The problem is that sometimes I have another USB stick on the same computer wich has

...sion: 3.1.0 Hardware: x64 OS: Linux Status: NEW Severity: major Priority: P5 Component: core Assignee: wayned at samba.org Reporter: armin_mohring at web.de QA Contact: rsync-qa at samba.org I have 3 USB sticks with 1 GB, 16 GB, 32 GB. All are formatted with FAT 32 filesystem. When I copy with cpa, then no error occurs. When I use rsync -av, then next mount, dmesg gives the following error: dirty bit, stick not properly unmounted. Run fsck. The stick was correctly unmounted and the copy process did fin...

Hello, I am searching for an internet usb surf-stick (umts) that works under CentOS. Is anyone using such a stick and if so, which chip has this usb-stick? Would a Huawei E160E chip work under CentOS? Or maybe under CentOS with the 2.6.35 kernel from elrepo? Thank you very much! regards Olaf

...t of the cloud function (lattice package) which might do this? As far as I can tell, the cloud function will (essentially) only plot the a stick from a point to z=0, rather than to the surface. Thanks in advance! PT -- View this message in context: http://www.nabble.com/Variant-of-cloud-with-%22sticks%22-from-points-to-surface-tp25953179p25953179.html Sent from the R help mailing list archive at Nabble.com.

...cently I came across an interesting web site: http://portableapps.com/. The idea is simple, this is software that is possible to install and run on some type of USB memory, a stick or one of these hard disks. I can think of a number of situations where this could be handy. In addition memory sticks are getting cheaper and more powerful by the day. So: Is it possible to run R off one of these sticks? I am also informed that it is possible to run Latex in this manner. Tom

Hello All. Below are some compile times for 2.6.20 on an fx-62 running Centos64 with various 2 gig sticks of dual channel ram (See previous posts with subject of 'segfaults with 8gig of ram' for more details.) It seems dual channel will compile a kernel faster, but only gained around 30 seconds over 20 minutes. Below are the shortest/longest compile times of several compiles done over the week...

> ]You seem to be assuming that changing from a direct SATA and IDE > ] connections to some USB adapter would have no impact on how the > ] respective HDDs are recognized/detected by the BIOS. > > ] You seem to be > ] assuming that the BIOS from 2 different PCs/Laptops would recognize all > ] your devices in the same exact way and that there would be no changes > ] in

I was trying to set up a USB stick with syslinux.exe, on a XP machine. Had the following problems: 1. Tried: 1.1 from XP native cmd shell: E:\>syslinux\syslinux.exe --directory /syslinux --install --force --mbr --active e: 1.2 and a similar command from cygwin. where e: is the USB stick. With cygwin I got a segmentation fault. With XP

Hi there, first, thanks a lot for syslinux! I'm aware that one can't mix syslinux 4's MBR + ldlinux.sys with syslinux 6's COM32R modules. Fair enough. Now, I need to know how strong this "versions *must* match" requirement is when dealing with different versions of syslinux 6.x. E.g. * MBR and ldlinux.sys installed by syslinux 6.03-pre1 * all *.c32 modules

I have a number of syslinux based USB sticks which can be booted from PCs that support USB boot. I also have a number of PCs that do not support USB Boot. They are running Windows 2000 and Windows XP typically from ntfs formatted single partition drives. Is there a way to chainload syslinux residing on a plugged in usb stick from boot.ini? I&...