search for: statseri

I have a Gamatronic Smart Compact 750. I have it connected to my linux machine via serial cable and am running nut 2.0.3. There is no interruption in power, but the ups is reporting OB (on battery). Is there a configuration option I am missing? The relevant ups.conf entry is: [Gamatronic] port = /dev/ttyS1 desc = "Home Gamatronic UPS" driver = genericups

...lk to UPS on port /dev/ttyS1! * bestups: Unable to detect a Best/SOLA or Phoenix protocol UPS * blazer_ser: No supported UPS detected I have also tried genericups with upstype=4, upstype=13, then I set OL to -DCD, then to -RNG, with no change when I cut the power Then I restored the power and ran statserial, which showed [*]. Cutting the power didn't change anything What should I try/do next? [*] statserial output: Device: /dev/ttyS1 Signal Pin Pin Direction Status Full Name (25) (9) (computer) Name ----- --- --- --------- ------ ----- FG 1 - -...

I recently bought a new UPS, and I''m attempting to use nut to monitor it. Following setup instructions everything seemed to go well until it came to testing the connection, which failed. There is just one serial connector on the computer, so I set it to monitor /dev/ttyS0. Either that is wrong, or communication is failing. I''ve been told to try minicom to monitor it,

...ver without result... ( I have tried others driver too...) I have tried the genericups but it does not work... This UPS have a RS232 port and seems not to be a "contact closure" UPS (but the manual, for example, tells that "pin 9 contact close: battery mode)... I have monitored (with statserial) the serial port with no result: all signals do not change... There is a proprietary application (closed source) that can comunicate with the UPS... I have saved the dialog between the application and the UPS; it seems that they use a 9600 bauds 8N1 configuration for the RS232... This is the trac...

Hello, Does anyone know the settings to get this UPS talking to nut? I'm trying to get it working over the serial port, and I've tried using genericups type 5. When I do this, the driver seems to initialize, but then upsc shows the status to be OB LB. When I unplugged the UPS, there was no change in the status. I noticed on the Tripp Lite web site that this uses a different cable. It is

Hi, Could somebody please help me get this one to work using the close contact information. I can not get it to detect off line Config: OpenSuse 11.0 NUT 2.2.2 [cyberpower] driver = genericups port = /dev/ttyS1 mfr = "Cyberpower" model = "PR1500LCDRTXL2U" desc = "Cyberpower PR1500LCDRTXL2U - Serial/contact"

Hello, I have a UPS connected to my server with the following: Server is Suse 10.1 Nut version is?Network UPS Tools - Generic UPS driver 1.32 (2.0.4) I installed this around 2005 and cannot remember how I installed the software. ups.conf: [sdrups] driver = genericups port = /dev/ttyS0 desc = "For Server & Backup" upstype = 9 upsd.conf: ACL all 0.0.0.0/0 ACL localhost

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine. I've followed all the basic guides on setting up NUT and UPS' but have had no luck. My current ups.conf is: [cyberpower-gentoo] driver = cyberpower port = /dev/ttyS0 desc = Workstation Upon running /etc/init.d/upsd start or upsdrv start I get: * Starting

...-multipath hfsutils perl-XML-SAX perl-XML-Twig perl-XML-Dumper perl-TimeDate perl-libxml-perl perl-Convert-ASN1 perl-XML-NamespaceSupport perl-DateManip perl-Crypt-SSLeay perl-Mozilla-LDAP perl-LDAP perl-XML-Grove python-imaging perl-Archive-Zip pexpect imake gcc-objc expect java-1.6.0-openjdk nasm statserial xferstats libsane-hpaio libvirt-cim Virtualization-en-US libcmpiutil telnet-server rsh-server tftp-server mailman postfix squirrelmail cyrus-imapd mod_auth_mysql mysql-devel mysql-bench php-mysql openldap-servers vnc-server freeradius system-config-bind system-config-boot rdesktop lsscsi uucp fes...

...client samba-common screen scrollkeeper sed -selinux-policy -selinux-policy-targeted -sendmail setarch -setools setserial setup setuptool sgml-common shadow-utils shared-mime-info sharutils slang slang-devel smartmontools sos specspo splint -sqlite -sqlite-devel squashfs-tools -startup-notification statserial strace stunnel subversion sudo swig symlinks sysfsutils sysklogd syslinux #sysreport sysstat -system-config-date -system-config-network-tui -system-config-securitylevel-tui -systemtap -systemtap-runtime SysVinit talk tar tcl tcl-devel tcpdump tcp_wrappers tcsh telnet -telnet-server termcap tetex...

Error: mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdc1 on /u02, could not mount /dev/sdc1. The installation step is: 1. install all rpms on int-rac1, int-rac2 2. interconnect int-rac1, int-rac2, ping each other using private ip and public ip ok. Add EMC SAN as shared disk and visable for two nodes. 3. configure int-rac1 using ocfs2console, add two nodes 4. according

Here is the output from yum -y upgrade without the error parts... Its odd because it updated all of these first time round. I have dared reboot the box yet, for fear it won't come back up... Setting up Upgrade Process Setting up Repos Reading repository metadata in from local files Resolving Dependencies --> Populating transaction set with selected packages. Please wait. --->