search for: stat0

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

I have this in a model validates_uniqueness_of :aspect, :scope => :user_id In an instance method of the same model I have "save!" but I don''t touch the :aspect attribute in that instance method at all. Whenever that save! command is run however I get this error: ActiveRecord::RecordInvalid: Validation failed: Aspect has already been taken I don''t

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

...ECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: Ben Skeggs - */ - -#include "priv.h" - -void -nv92_gpio_intr_stat(struct nouveau_gpio *gpio, u32 *hi, u32 *lo) -{ - u32 intr0 = nv_rd32(gpio, 0x00e054); - u32 intr1 = nv_rd32(gpio, 0x00e074); - u32 stat0 = nv_rd32(gpio, 0x00e050) & intr0; - u32 stat1 = nv_rd32(gpio, 0x00e070) & intr1; - *lo = (stat1 & 0xffff0000) | (stat0 >> 16); - *hi = (stat1 << 16) | (stat0 & 0x0000ffff); - nv_wr32(gpio, 0x00e054, intr0); - nv_wr32(gpio, 0x00e074, intr1); -} - -void -nv92_gpio_intr_ma...

...BSD on the second half of the drive, and make an entry into the XP boot loader. Reboot into the fresh BSD install - now the trouble begins... I periodically receive the following messages: Apr 29 01:07:45 udns kernel: ata0: reiniting channel .. Apr 29 01:07:45 udns kernel: ata0: reset tp1 mask=03 ostat0=58 ostat1=50 Apr 29 01:07:45 udns kernel: ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 Apr 29 01:07:45 udns kernel: ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb Apr 29 01:07:45 udns kernel: ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> Apr 29 01:07:45 udns kernel: ad0:...

...port for UDMA66, but FreeBSD reports that the drive is being set to UDMA33. I booted in verbose mode, and here are the relevant parts from dmesg. atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 14 eb ata0: mask=03 stat0=50 stat1=10 ata0-master: ATA 01 a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 ... ad0: success setting UDMA2 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <Maxtor 4D040H2/DAH017K0> ATA-...

...0x1023, dev=0x8 500) at 0.0 irq 11 isab0: <PCI to ISA bridge (vendor=1106 device=8231)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8231 ATA100 controller> port 0xd000-0xd00f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 00 00 ata1-slave: ATAPI 00 0...

...ives are found. ata0 is probed successfully, > ata1 is skipped (there are no devices attached here), and then the > sata controller is found, but ata2 and ata3 appear to be probed > incorrectly, spitting out a message like this a bunch of times before > quietly failing: > "ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff". This could be normal for verbose boot; it does not necessarily indicate a problem, but the ATA guys will have to confirm. Also, regarding this mail thread, I'm going to do a couple things with it: - Move it from -questions to -stable, because that's...

...1 isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 0...

...dor=0x1002, dev=0x514c) at 5.0 irq 10 isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 14 eb ata0-slave: ATAPI 7f 7f ata0: mask=03 stat0=10 stat1=00 ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=20 ostat2=30 ata1-master: ATAPI 20 20 ata1-slave: ATAPI 30 30 ata1: mask=03 stat0=2...

...7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type...

...:15:0): Error 5, Retries exhausted ahcich2: AHCI reset... ahcich2: SATA connect timeout time=10000us status=00000000 ahcich2: AHCI reset: device not found ahcich3: AHCI reset... ahcich3: SATA connect timeout time=10000us status=00000000 ahcich3: AHCI reset: device not found ata0: reset tp1 mask=01 ostat0=50 ostat1=ff ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 GEOM: new disk cd0 cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <PLEXTOR CD-R PX-W2410A 1.04> Removable CD-ROM SCSI-0 device cd0: Serial Number 779304 cd0: 33.300MB/s transfers (UDMA2...