search for: staleness

Hi Charles, On Monday, 27. June 2016 08:59:02 Charles Lepple wrote: > > is there a way to query from the cmdline if the UPS data is stale? > > The "data stale" state applies to the entire set of variables for an UPS, > so if the exit code of `upsc` is zero, the data set is not stale. > > "upsc" outputs a lot of information, but not if the data is stale.

Hello, is there a way to query from the cmdline if the UPS data is stale? "upsc" outputs a lot of information, but not if the data is stale. Example output from a "stale" UPS on the server: (nut version: nut-2.7.2-3.el7) # upsc apcsmart battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.mfr.date: 2014/09/01 battery.runtime: 1320

...2]: UPS [ups1] data is no longer stale May 5 03:50:47 egbert upsd[96662]: Data for UPS [ups1] is stale - check driver May 5 03:50:50 egbert upsd[96662]: UPS [ups1] data is no longer stale ie 5 messages per second! MAXAGE is 15 seconds, IMO it should be at _least_ that time between complaints of staleness.. Am I misunderstanding what MAXAGE does? -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 43...

Here are the results of a restart as well as a stop/start. Seems like it may be the server? I tried to run the nut-server service with gdb, but no luck getting it to work so far. Thanks! ________________________________ From: Charles Lepple <clepple at gmail.com> Sent: Wednesday, October 12, 2016 8:20 PM To: Daniel Shields Cc: nut-upsuser at lists. alioth. debian. org Subject: Re:

Hello, I'm using driver newhidups with APC Back-UPS CS 500. Most things works fine except the following: After I disconnect the UPS the upsd write "Data for UPS [apc] is stale - check driver" in /var/log/messages. In the same second it tells "UPS [apc] data is no longer stale". This repeats all the time the ups is disconnected: Jan 25 14:45:03 degpn026w226 kernel: usb

Just an update, these messages are in the syslog when nut is no longer able to communicate with the server: Oct 14 01:41:59 golgotha upsmon[1300]: Poll UPS [nailbunny at localhost] failed - Data stale Oct 14 01:42:04 golgotha upsmon[1300]: Poll UPS [nailbunny at localhost] failed - Data stale Oct 14 01:42:09 golgotha upsmon[1300]: Poll UPS [nailbunny at localhost] failed - Data stale Oct 14

hi: when testing nut in our environment, we found something that nut maybe tune for "stale/dead ups" situation. currently the "dead ups" are assume alive(eg: host shutdown unnecessary), unless it is in the "OB" state before going to stale. our environment (ServerA + ServerB forms a cluster): ServerA-> usb to UPSA -> two PS power by UPSA and UPSB

I'm getting dozens of these at a very high rate: [Jan 20 09:15:27] NOTICE[16958]: chan_sip.c:12687 check_auth: Correct auth, but based on stale nonce received from '"" <sip:121 at gnat.com>;tag=as5f1a9480' [Jan 20 09:15:28] NOTICE[16958]: chan_sip.c:12687 check_auth: Correct auth, but based on stale nonce received from '"" <sip:130 at

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Ran with gdb: gdb /lib/nut/usbhid-ups run -u nut -a nailbunny -x bus=010 -x vendorid=0764 -x productid=0501 -DDDDD Same result as when I ran normally. Driver just stops communicating with no errors or messages in the logs. Not sure where to go from here as I'm not seeing anything to follow up on. ________________________________ From: Daniel Shields <grungelizard9 at

Hi, FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. I set the ups.conf up as : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3) Could not get multiplier table: using raw

Thanks for your response (6 months ago!) but I have only just got around to following up on this. Unfortunately, I had already copied and shipped the data to the second datacenter before copying the GFIDs so I already stumbled before the first hurdle! I have been using the scripts in the extras/geo-rep provided for an earlier version upgrade. With a bit of tinkering, these have given me a file

Hallo, I installed nut 2.0.4 on a Solaris 8 and tried two things: First I wanted the ups to connect via usb, but I could not compile the usb drivers. Make usb told me: no target named usb found Second, because both ups and host have serial ports I tried to get it working with serial. The driver starts very fine, but takes a long time to detect the ups. Upsd starts too, but while get in

Ok - before stale data: After stale data: $ lsusb -d 0665: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial After stale data: And the gzipped log attached: On 2 January 2015 at 21:56, Charles Lepple <clepple at gmail.com> wrote: > On Jan 2, 2015, at 2:43 PM, Mike Raath <raathm at gmail.com> wrote: > > Not sure what other logs I can provide to try

On Jun 27, 2016, at 4:46 AM, Thomas Jarosch wrote: > > Hello, > > is there a way to query from the cmdline if the UPS data is stale? The "data stale" state applies to the entire set of variables for an UPS, so if the exit code of `upsc` is zero, the data set is not stale. > > "upsc" outputs a lot of information, but not if the data is stale. > Example

I'm receiving the following error over and over, adnauseam: Oct 1 23:59:53 NOTICE[3194]: chan_sip.c:5890 check_auth: stale nonce received from 'CNAME-CID <sip:5551212@192.168.1.X>' Does anyone know what "stale nonce" is? Thanks! Paul Conn -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Team, While mounting the gluster volume using 'mount -t glusterfs' command it is getting failed. When we checked the log file getting the below logs [1970-01-02 10:54:04.420065] E [MSGID: 101187] [event-epoll.c:391:event_register_epoll] 0-epoll: failed to add fd(=7) to epoll fd(=0) [Invalid argument] [1970-01-02 10:54:04.420140] W [socket.c:3095:socket_connect] 0-: failed to register

Hello NUT Team! I continue playing with NUT for Windows and USBHID-UPS driver I've got from Frederic to fix "Data Stale" problem. It seems there is something wrong when Network UPS Tools service is starting with disconnected USB cable. UPSMON is writing "Data Stale" to output and continue do it infinitely, even the cable is connected back. Here is a short log: Network

Sorry, I messed up my reply a bit. The output of the lsusb command is the same before and after the data goes stale. $ lsusb -d 0665: Bus 002 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial And the output of the /lib/nut/nutdrv_qx -a apollo-ups -DD 2>&1 command is the same as in the previous attachment. I truncated the "before" log because it just carried on with